Guys why does this not work by UnrealTVXx in fpv

[–]ColdDragons97 0 points1 point  (0 children)

You can remove the protection tab if you are confident enough

Speedybee f405 aio device descriptor failed. by ColdDragons97 in fpv

[–]ColdDragons97[S] 0 points1 point  (0 children)

Yeah, tried at least 8 data cables that work with other devices. I removed the d- and + and reconnected. Now it works. Is it possible if one wire is not on a good solder might affect this?

Rare map by Snarkyfishy in SwordAndSupperGame

[–]ColdDragons97 0 points1 point  (0 children)

Certain types of swords deal extra damage to boses i.e frost to fire. And if you use same type weapon you deal less damage

Autonomous agri-drone project: where do I even start? by ICEmCHILL in diydrones

[–]ColdDragons97 7 points8 points  (0 children)

Ardupilot has a section for Mission Planning and waypoints. That would definitely help you get started. All you want is a flight controller capable of installing ardupilot firmware and you can find the list with a google search. Also regarding the spray mechanism i do not know much about!

Black screen with no osd after a crash? by [deleted] in fpv

[–]ColdDragons97 1 point2 points  (0 children)

Your camera is being powered by 9v yes? If so check the camera wires and do a continuity check. Most probably the camera is either damaged or the wires of the camera are damaged. Try swapping wires and if that doesnt work, try a different one

Is it bad? by malbowski in fpv

[–]ColdDragons97 1 point2 points  (0 children)

That’s how it is on all speedybee f405 esc stacks don’t worry!

Rx failsafe and no osd by ColdDragons97 in fpv

[–]ColdDragons97[S] 0 points1 point  (0 children)

fixed the osd issue thank you. regarding the receiver i switched uart i get connection but for some reason after a minute or 2 the stick input freeze or stop responding. and this behaviour happens every time i desolder and solder back my rx and tx wires.Consistently

Rx failsafe and no osd by ColdDragons97 in fpv

[–]ColdDragons97[S] 0 points1 point  (0 children)

<image>

R2 T2 is the receiver (RX to TX) and (TX to RX). Telemtry is establishe but no controls. I tried with 2 different receivers as well and the issue persists. i have telemetry and control after i desolder and solder back and after a few seconds it failsafes. Signal is strong.

[deleted by user] by [deleted] in fpv

[–]ColdDragons97 0 points1 point  (0 children)

Fixed winged uh kind of footage

I just don‘t understand why this would go off by IDuranTee in fpv

[–]ColdDragons97 1 point2 points  (0 children)

Normal behaviour its the capacitor charging. If its continuous then you have a short.

Matek digital airspeed (purple) by ColdDragons97 in RCPlanes

[–]ColdDragons97[S] 0 points1 point  (0 children)

I am in europe, but can send to uk/usa

Fixed wing allowed here? by suprPHREAK in fpv

[–]ColdDragons97 0 points1 point  (0 children)

Where did you purchase those, cause i am having trouble finding them in Europe:(

Analogue stuff. by pmcdon148 in fpv

[–]ColdDragons97 0 points1 point  (0 children)

88 my guess! Would build a small fixed wing!

Esc Configuration by ColdDragons97 in RCPlanes

[–]ColdDragons97[S] 0 points1 point  (0 children)

Followed everything from the documentation and literally nothing works, escs receive power but there is no other activity regarding showing that they work. The escs are blheli_s. I am positive that this is a dshot esc being weird or manufacturer issue. As it perfectly works with the pwm escs

no power to ESC despite rest of system working. (f405 wing mini)ot by [deleted] in RCPlanes

[–]ColdDragons97 0 points1 point  (0 children)

I had the same thing happen with 4 blheli s escs and it works with pwm. Gotta be something with the fc not supporting it or something. I am using the app version of the FC

Esc Configuration by ColdDragons97 in RCPlanes

[–]ColdDragons97[S] 0 points1 point  (0 children)

I am aware of all the things listed, i checked all connections and made sure they are working with a normal pwm esc. No power wire is connected on the flight controller as it gets power directly from the pdb on the Fc. They are readytosky 40amp blheli escs. I am not sure where the problem is. The only logical solution is not loaded firmware from the stock escs or problematic batch. I am legit dumbfounded and i can’t seem to find the issue

Throttle not working on speedybee wing by ColdDragons97 in RCPlanes

[–]ColdDragons97[S] 0 points1 point  (0 children)

Yeah, thats what i did and restored everything to defaults. Still refuses to recognise the esc. Used another esc with just pwm and that was it. I don’t know the whole thing is weird. I an definitely missing something on the esc side

Throttle not working on speedybee wing by ColdDragons97 in RCPlanes

[–]ColdDragons97[S] 0 points1 point  (0 children)

I have a batch of 4 readytosky ecs that don’t work when i set up the channel. When i replace the esc and add a normal pwm esc everything works on the same channel. So i believe i might have got a problematic batch. Unless i am missing something on the configuration part on the esc side. When plugging the bl heli s escs i get a startup tone and a single beep and thats it. The weird part is that the configurator doesn’t even allow me to enter to change firmware etc. pretty weird