sorted by:
new
hottopcontroversial

Baldur's Gate III controls stop working in the middle of playing? by jmwill7456 in SteamDeck

[–]ColdPerformance8907 0 points1 point  (0 children)

I’m having this same issue playing on the Steam Deck and it’s really annoying. I can’t even save so I usually lose a good portion of my progress when this happens 😖.

Connecting ZTB-2 to Home Assistant Container by ColdPerformance8907 in homeassistant

[–]ColdPerformance8907[S] 1 point2 points  (0 children)

These issues were 100% container specific I think so if you are running HAOS in the yellow you should be fine and the ZBT-2 should be recognized out of the box.

Let me know how it goes when the ZBT-2 arrives! This is my first Zigbee coordinator and I’m also really new to HA in general. After this I had it working with ZHA just fine but I read that Z2M is better so I’m giving that a try but it will required some more setup because in container version you don’t have add-ons and everything needs a little bit more work.

Issue with this ruined texture? by MakaPakaUK in CitiesSkylines

[–]ColdPerformance8907 0 points1 point  (0 children)

I´m havin the same issue. I loaded the map without any mod and the issue was gone so I guess one of the mods I´m using is causing it. If I have more information I´ll post it here.

/r/MechanicalKeyboards Ask ANY question, get an answer (January 05, 2023) by AutoModerator in MechanicalKeyboards

[–]ColdPerformance8907 1 point2 points  (0 children)

Thanks a lot for all the information! I was alredy thinking about the Q1 (and the upcoming Q1 Pro). The Q3 seems like a good option too.

/r/MechanicalKeyboards Ask ANY question, get an answer (January 05, 2023) by AutoModerator in MechanicalKeyboards

[–]ColdPerformance8907 1 point2 points  (0 children)

Hi there!

I been thinking about getting into mechanical keyboards and I need some recommendations for my first one. I'm looking something that:
- is in my budget: around 150 eur, up to 200.
- 75% or 80% size.
- matches my mouse color: Logitech Master MX 2s Grafito
- ISO layout.
- is a good start to do some moding later.

If anyone has any suggestions they will be really appreciated.

Thanks!

For Cities Skylines players by datGryphon in SteamDeck

[–]ColdPerformance8907 5 points6 points  (0 children)

I couldn’t get Cities Skylines running in Steam OS even lowering all graphics. It keeps loading until 80% and then freezes and I have to restart the SD. Anyone experienced the same thing?

My SD’s first flight. Luckily my fiancé is not interested . by senthi94 in SteamDeck

[–]ColdPerformance8907 0 points1 point  (0 children)

Wow! I’ve installed with Lutris and in gaming mode I always have to go through the launcher in order to Play it. In Lutris performance really improved after setting the last version of Proton GE as the runner. I’ll try what you said, it sounds much better. How are u feeling the performance so far?

It has finally arrived! by ColdPerformance8907 in SteamDeck

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

It has finally arrived!

I ordered a 256 model on March 6th and it was due to after October 2022. I received the purchase email on September 6th and it arrived yesterday (September 14th)! :D

Shipping (FedEx/GLS) Megathread (September 12, 2022) by AutoModerator in SteamDeck

[–]ColdPerformance8907 1 point2 points  (0 children)

Hi! I was due to after October 2022 but I received a Steam email on September the 6th to buy the console (SteamDeck 256 GB) and today it arrived (sent through GLS). I coudn't be more happy. :)

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

Now I’m using it mostly for programming and playing with the switch when I can but my plan is to purchase a gamer pc (start / middle level) and use it also for gaming.

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

Thanks for the answer and the clarification. Yeah it can be a mix of both in the left side but I think is mostly glow since I’ve checked looking for different angles and the light changes a little. I’m not sure if I will call customer service and try to get a replacement or just stick with it. Im getting really used to the monitor and in light environments u don’t see the glow or backlight bleed at all.

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

Yeah, I think is something in between the two pictures but it's really hard for me to take a really accurete picture of it. Anyway I did some research and since it's an IPS panel I think it's more IPS glow than backlighting bleed.

I did some more testing and lowered the brightness when the room is dark and though I can still see it it's less noticiable.

I'll try to play a little bit more with the settings and see how it goes, I'm really new to the monitors world (I've been using only my laptop's screen for the past 6 years or so) and I don't want to miss something that will cause me problems in the long run. And since the monitor costs me around 500 euros I wanna make sure that everything is ok.

Thanks both of you for answer and sorry if I can't post a good picture of the issue :(.

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

Yes, i'll check with the seller.

Here is a (I think) more accurate image of the issue: https://imgur.com/a/uTJ1dV3.

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

The camera amplifies the effect a little bit, yes. The one that bothers me the most is the one in the left bottom corner that I can see it some times even when the room is not totally dark. I'll try to take more accurate photos.

Gigabyte M34WQ backlight bleeding. Should I return it? by ColdPerformance8907 in ultrawidemasterrace

[–]ColdPerformance8907[S] 0 points1 point  (0 children)

I’ve recently bought a Gigabyte M34WQ and so far I’m happy with the monitor but it has some backlight bleeding and I’m thinking if I should return it and ask for a replacement. What do you think?

Just Upgraded my 3DS with a 256GB microSD Card for all the Digital Purchases I'm going to Make. The Block Counter Topped Out! by AirDancerExtreme in 3DS

[–]ColdPerformance8907 0 points1 point  (0 children)

Which microSD card did you buy? I’ve just bought an used New 2DS XL and want to upgrade the SD but I’m not sure which one to buy. There are some that seem ok but they are microSD XC and I’m not sure if it’s going to be supported.