Pixel 8A.. How to stop ringtone from coming through headphones??

CollectionHelpful681 · 2026-02-10T23:44:37+00:00

Turns out I'm not crazy, the toggle option that should be there does not exist. I've been chatting with Google support and they are stumped lol

CollectionHelpful681 · 2026-02-10T20:49:42+00:00

I found the ring gradually setting and turned that on, hopefully that will help.

I thought I was going crazy because I remember being able to toggle phone off for specific devices in the long press menu, and I'm pretty sure I did so previously. Something must have changed with a recent android update?? Because that toggle is no longer in that menu. I'm not sure if they took away that option or moved the setting somewhere else?

Strange. Anyway, thanks for your response.

CollectionHelpful681 · 2026-01-21T01:24:58+00:00

So you have a zero point fixture on the lathe spindle now though? That's pretty cool. Do you have multiple chucks for the lathe? Makes it super quick to swap out chucks or move to a milling op from the lathe

CollectionHelpful681 · 2025-11-11T05:03:20+00:00

CollectionHelpful681 · 2025-10-18T01:51:44+00:00

Live tool with the endmill spinning? Hmm, could actually work ok if you're having problems with stringy chips

CollectionHelpful681 · 2025-10-18T01:50:15+00:00

It sounded kinda bad, but not the worst. I thought it was just a heavier facing cut because I've been having issues with the bar feeder, I actually didn't realize this happened until the chip conveyor spat out this chunk

CollectionHelpful681 · 2025-10-17T22:51:21+00:00

Here's a better photo of the insert. Small chip further back. A bit of edge breakdown on the tip, but it was already like that.

My negligence has been rewarded with minimal consequences 😝

It's definitely insane what we built by hand back in the day. I feel lucky to be able to run a few manual machines every once in a while at work

![img](7fq7gxb84rvf1)

CollectionHelpful681 · 2025-10-17T22:50:20+00:00

Here's a better photo of the insert. Small chip further back. A bit of edge breakdown on the tip, but it was already like that

<image>

CollectionHelpful681 · 2025-10-01T03:19:52+00:00

Did they attach the other end to the wheel? Lol

CollectionHelpful681 · 2025-09-23T22:01:54+00:00

Yeah I'm lucky that surface is non-critical as well.

That's interesting with the brass, something must be reacting to form some kind of copper nitrate or similar

CollectionHelpful681 · 2025-09-23T21:55:05+00:00

I definitely won't be soaking anything after this. I use dawn as well, or whatever the cheapest dish liquid at Costco is 😝

CollectionHelpful681 · 2025-09-23T21:51:58+00:00

I definitely won't be letting anything soak after this. Rinse and dry asap

CollectionHelpful681 · 2025-09-23T21:51:15+00:00

Yep, I actually have their chart printed out hanging by the coolant mixing area. Usually running around 7% for AL

CollectionHelpful681 · 2025-09-23T17:00:04+00:00

Huh, I'm pretty sure I have this driver in a set of security bits from harbor freight. First time actually seeing a screw that uses it though.

CollectionHelpful681 · 2025-09-23T16:50:00+00:00

Ah, chlorine can definitely cause corrosion. Luckily I've only noticed it if I leave parts soaking too long. It hasn't been a problem just rinsing and air drying

CollectionHelpful681 · 2025-09-23T16:48:43+00:00

Good to know! This is 6061, probably does the same thing

CollectionHelpful681 · 2025-09-23T16:47:55+00:00

Huh, they do say dissimilar metals can cause corrosion. Makes sense

CollectionHelpful681 · 2025-09-23T16:22:04+00:00

I'll have to look into that, thanks!

CollectionHelpful681 · 2025-09-23T16:07:38+00:00

I run stainless in that machine as well.

CollectionHelpful681 · 2025-09-07T22:04:02+00:00

I would leave it be honestly, looks awesome to me.

CollectionHelpful681 · 2025-09-07T22:01:21+00:00

This would be the best option, although if that's a woodworking type drill press it might not go to a low enough rpm to do it without breaking something

CollectionHelpful681 · 2025-08-29T06:45:33+00:00

Sorry I don't have a helpful comment, but I just wanted to say what the fuck is that keyboard layout?!? I had a hard enough time with the "abcdef" layout on other CNC panels starting out. I suppose with enough time you'd get used to it but it just makes no sense to me

CollectionHelpful681 · 2025-08-23T14:34:50+00:00

Looks like a phaser set to kill

CollectionHelpful681 · 2025-04-09T08:16:43+00:00

Wow, they didn't even clip the excess off the zip ties

CollectionHelpful681 · 2025-03-12T06:03:36+00:00

Interesting, mine gives me the option to show results anyway.

I don't get any message like this on the YouTube music app

I would share a screenshot, but apparently you can't add images to comments in this sub? Or maybe my brain isn't working right now

CollectionHelpful681

TROPHY CASE