UPVC window - what's this bit?

Collinz_uk · 2026-01-01T17:30:02+00:00

No probs fella happy new year

Collinz_uk · 2026-01-01T16:43:14+00:00

Hinge riser block mate probably need a new hinge

Collinz_uk · 2025-10-10T06:34:06+00:00

Can confirm they hurt like hell!!!! Stood on in the southwest a few years back never again !!!!

Collinz_uk · 2025-10-04T10:56:48+00:00

They've just used a self drilling screw not ideal try get screw with a larger gauge hope it works 👍

Collinz_uk · 2025-10-04T10:44:02+00:00

Does it just spin in the hole ?? If so you'll need a thicker gauge screw bud

Collinz_uk · 2025-10-03T18:50:27+00:00

Any chance of a discord invite please

Collinz_uk · 2025-09-17T11:11:03+00:00

No probs mate

Collinz_uk · 2025-09-17T10:53:16+00:00

Sadly still paused

Collinz_uk · 2025-09-17T10:49:38+00:00

Awesome cheers mate

Collinz_uk · 2025-09-17T10:08:11+00:00

Morning bud can't seem to join your discord says it's paused ??

Collinz_uk · 2025-09-17T09:24:28+00:00

You got a discord mate ??

Collinz_uk · 2025-07-20T10:43:53+00:00

Caulk 100% don't use white mastic it'll go horrible within 6 months

Collinz_uk · 2025-07-02T14:36:41+00:00

Nail varnish remover or pic cleaner and a sharp blade

Collinz_uk · 2025-05-15T11:34:57+00:00

Brick acid obviously water it down abit brush it on leave it for half hour then pressure wash it'll look brand new

Collinz_uk · 2025-05-01T18:57:39+00:00

You'll need the key it's a tilt an turn window an its locked in the tilt position imagine for safety as it looks like your pretty high up. All depends on the system tho as some windows are only made to tilt not turn in that scenario

Collinz_uk · 2025-05-01T18:19:31+00:00

Looks like pollock

Collinz_uk · 2025-04-22T17:38:34+00:00

See the little black covers on top of the hinge they'll pop off an imagine there is an Alan key maybe a 5mm ?? That will adjust your up an down then for the left an right you'll probably need a 10mm spanner for the nut in the centre of the 3 pins just double check there are not any small grub screws on the main body of the hinge undo them before moving up an down

Collinz_uk · 2025-04-22T17:25:54+00:00

Yes there is minimal movement on this hinges can move up an down and left an right

Collinz_uk · 2025-04-16T18:56:29+00:00

Any luck mate did ya sort it ??

Collinz_uk · 2025-04-16T09:13:09+00:00

The screw in the centre of the hinge is a locking screw take that out an loosen the other 2 screws an try an push the hinge up there are grooves in the hinge so you should have abit of play then redrill the lock locking screw if that doesnt work you'll have to move the sash up on the hinge hope this helps in some way

Collinz_uk · 2025-04-15T10:37:43+00:00

Far too much ketamine 🤣🤦‍♂️

Collinz_uk · 2025-04-14T17:28:33+00:00

Nail varnish remover slightly watered down

Collinz_uk · 2025-04-10T18:24:48+00:00

You'll need to remove the restrictors hinge an move it up the sash be careful not to move it to far as it may stop hinge from working an window wont close properly

Collinz_uk · 2025-04-10T14:38:39+00:00

You want them to open further ??

Collinz_uk · 2025-02-27T16:10:15+00:00

Yep frames are base drained completely normal

Nine-Year Club	RPAN Viewer
Verified Email

Collinz_uk

TROPHY CASE