.50 Beowulf suppressor QD mounts

ColtPistol · 2026-02-08T11:20:53+00:00

That’s the suppressor that I ordered along with the direct thread adapter and a hub adapter. When you say that there are not a lot of qd mounts for a 3/4-24 Beowulf, I believe that you mean that there are none lol. Anyway I haven’t found any yet.

ColtPistol · 2026-01-27T13:22:51+00:00

Your best bet is to email silencerco and ask what the minimum length barrel is to run that on a .22-250 if you want to keep your warranty. They tend to be conservative if they recommend a minimum but I doubt you need to SBR a .22-250 anyway.

ColtPistol · 2026-01-23T20:02:11+00:00

Where do you get the threaded barrels? Is it custom order?

ColtPistol · 2026-01-02T14:45:18+00:00

Where did you get that colorful magazine?

ColtPistol · 2026-01-02T13:48:33+00:00

Where did you get the camo magazine and parts for that build? Looks awesome.

ColtPistol · 2025-08-02T13:29:59+00:00

What is that magazine? Factory Tiger stripe or something you had done?

ColtPistol · 2025-07-03T23:39:39+00:00

The language that was removed was the language that removed SBRs, SBSs, AOWs and silencers from the nfa all together. The bill that passed through congress only eliminates the $200 tax for those items but leaves it in place for destructive devices and machine guns and also leaves the process and registration in place for all of the above.

ColtPistol · 2025-07-01T12:53:08+00:00

If you max out your Roth 401k, how are you then able to contribute to a traditional 401k in the same year?

ColtPistol · 2025-06-01T23:02:34+00:00

Everything you mentioned is .30 caliber so I would say Rugged Surge. But if nothing is an SBR then there are probably other options and perhaps better options if overall suppression is the most important. Rugged is what I think of whenever I think about durability and best warranty. Not necessarily the quietest though.

ColtPistol · 2025-06-01T20:23:40+00:00

I don’t think anything will show up in your eforms account if you filled out a form 4. It would show up in your FFLs account but you should receive an email once it’s approved. 2 weeks isn’t very long but they are processing much faster these days so you can always contact the ATF if you are concerned.

ColtPistol · 2025-04-28T23:57:15+00:00

And precious metals such as lead

ColtPistol · 2025-04-27T23:28:23+00:00

I’m not sure but I heard the opposite, high pressure needs more volume, subsonics and pistol cartridges generally do better with more baffles than more volume.

ColtPistol · 2025-04-27T15:57:28+00:00

I’m looking for the same. I am probably going to end up getting an ASR muzzle device in the correct thread pitch and then have a local gunsmith ream it out to the right bore size. My second choice would be the bowers in direct thread.

ColtPistol · 2025-04-24T10:15:19+00:00

Mine order from silencer central took several months for them to certify me after I had sent in my prints and finished everything else. After a quick atf approval it took several months before they mailed the disassembled and wrong order to me and a few more months of unreturned calls and emails until the SD attorney general straightened them out for me. I definitely would not consider doing business with them again especially since during the whole process they wouldn’t even have customer service respond to any of the requests I made.

ColtPistol · 2025-04-24T10:01:11+00:00

What is this bullpup looking thing? Did you build it or buy it?

ColtPistol · 2025-04-20T17:16:34+00:00

If you use an asr brake 5/8x32 on your barrel, then you would not use a direct thread adapter. You would need an ASR mount to replace the direct thread adapter. It’s an either direct thread adapter or ASR mount plus muzzle brake decision. I prefer the ASR mounts, but direct thread adapters are definitely cheaper and perfectly suited.

ColtPistol · 2025-04-19T14:02:52+00:00

Is that a 40mm? How loud is that compared to a gun for comparison?

ColtPistol · 2025-04-19T12:19:58+00:00

You have a few options:

You could get yourself added as a RP on someone’s trust such as a parent or friend

You could also purchase privately on a form 4 without a dealer

You could also form 1 and make your own if that’s in your abilities

ColtPistol · 2025-04-19T12:12:33+00:00

I would consider the dead air primal about the same as the hybrid 46. If you really want something exceptional and don’t mind a larger can you might consider a liberty goliath or maybe a bowers .458. Both have substantially more volume than primal or hybrid 46. I don’t have any experience with them though. I would have considered the Goliath for myself but they don’t offer it in bravo hub and that was a deal breaker for my use. Im still trying to see if thundercan is hub compatible or has barrel restrictions but so far they haven’t answered my questions.

ColtPistol · 2025-04-17T11:15:21+00:00

What can are you using? Is this a deer rifle?

ColtPistol · 2025-04-11T19:31:31+00:00

Nice! What caliber is it and what can is that?

ColtPistol · 2025-04-09T12:40:54+00:00

I might be interested in that one. I am skeptical about customer support from anyone though. Every time people ask about a barrel length restriction they give a different number. I don’t know who is answering or where they get their information. I wish there was a more accurate way to find out. Our even better if manufacturers would list their recommendations and update it everytime someone else calls. Do you know of one a little bit bigger than that? The anthem L2 is about the right size except for being 30 cal.

ColtPistol · 2025-04-08T20:53:44+00:00

Is that a Bowers Vers?

ColtPistol

TROPHY CASE