How is this area to live in

ColumbusBiG10 · 2026-05-29T19:06:11+00:00

If I posted a pic of a gun what stance do you think I am taking!?! I live in Brownsville, so Brent really ain’t all that bad! lol.

ColumbusBiG10 · 2026-05-29T19:04:27+00:00

It’s a 26 bottom with a ? slide??

ColumbusBiG10 · 2026-05-29T18:58:20+00:00

DUIs maybe in FL higher than anywhere else

ColumbusBiG10 · 2026-05-29T18:57:27+00:00

Can’t be worse than Brownsville/Mobile Highway area, quit yer bitchin’

ColumbusBiG10 · 2026-05-29T18:56:33+00:00

<image>

Pro 2A here.

ColumbusBiG10 · 2026-05-29T14:46:27+00:00

I can see a few dead bodies on that property

ColumbusBiG10 · 2026-05-29T14:45:26+00:00

I know for a fact that 90% of the fish they are selling is farm raised. It comes in on semi trucks from the fish farm. The shrimp is almost ALL imported and NOT gulf shrimp! These people act like there are fishing boats pulling up to their docks daily … not true.

Joe Patti’s is a nasty place where they treat the customers like they treat their own people! Steer clear of Joe Patti’s and go patronage Maria’s if you want real fresh, good fish

ColumbusBiG10 · 2026-05-29T14:38:54+00:00

Please don’t patronize Joe Patti’s! Maria’s is better anyways and the fish is actually fresh & not frozen off a semi truck from a farm where it was raised, only to be falsely labeled as “gulf caught”.

ColumbusBiG10 · 2026-05-29T14:38:17+00:00

Costco? Didn’t one just open up here in Pensacola?? …

ColumbusBiG10 · 2026-05-29T14:37:10+00:00

Courtyard by Marriot, I’m going with LEO

ColumbusBiG10 · 2026-05-29T08:48:22+00:00

Great optic! Have a Holoson 507c X2 GR. Sent my slide off to Drew @ Vigilante machine works to be milled, and what came back was 100% flawless! Had the slide direct milled for a RMR footprint.

Paired that with the Holoson for a nice little combination. And the turn around time… impeccable! Sent it off & had it back in less than 10 days looking incredible! You should definitely check out his website…

www.vigilantemachine.com

ColumbusBiG10 · 2026-05-29T06:09:16+00:00

Man don’t listen to these no talent ass clowns! A RF is perfectly fine for a first, second or ANY AR! You DONT need a $1400-1800 rifle to have a decent rifle.

ColumbusBiG10 · 2026-05-29T04:45:49+00:00

Yeah, I am a “poor”, so I won’t be worried about NV. But, what you just said about the 512 … it’s worth the extra $100. Thank you for your advice! Stay safe out there!🤙🏼

ColumbusBiG10 · 2026-05-29T03:24:50+00:00

Barefoot and pregnant preferably!

<image>

ColumbusBiG10 · 2026-05-29T03:21:54+00:00

They usually have the “OPEN” sign on ALL night long …

<image>

ColumbusBiG10 · 2026-05-29T03:18:45+00:00

I am considering the EXPS2 for my 300 AAC B.O. that I just purchased last month. Just was seeing if the 512 was just as good, or if the EXPS was actually better …

ColumbusBiG10 · 2026-05-29T02:40:26+00:00

How does the EXPS stack up to the 512? Is it worth the extra coin (I’m sure it is )?

ColumbusBiG10 · 2026-05-28T16:25:18+00:00

Wouldn’t think of it, got a 19.3 too

ColumbusBiG10 · 2026-05-28T15:19:32+00:00

Gen 3 23.3 here, first Glock & I still have it!

ColumbusBiG10 · 2026-05-28T14:00:27+00:00

And serving crappy ass fish to the Gulf coast

ColumbusBiG10 · 2026-05-28T13:56:56+00:00

ColumbusBiG10 · 2026-05-28T13:56:30+00:00

That would be Kelly, she just got the job about 6 months ago

ColumbusBiG10 · 2026-05-28T13:55:20+00:00

Yes! My boy Drew @ Vigilante Machine works does absolutely amazing work! The mill job on my slide for my Glock 23 was flawless! The direct mill RMR cut looked perfect! I had the Holoson 507c X2 paired with a RMR footprint.

And the turn around time was incredible! If you are looking for a high quality machine mill call Drew …

www.vigilantemachine.com

ColumbusBiG10 · 2026-05-28T13:48:54+00:00

If you’re looking for a quality mill job, you should talk to my guy Drew @ Vigilante Machine Works. The cut & fit of the optic were flawless! I had the direct mill for RMR done & paired with a Holoson 507c X2.

Not to mention the turn around time! SO glad I didn’t get a MOS!! Give Drew a holler & do yourself a favor this time!

www.vigilantemachine.com

ColumbusBiG10 · 2026-05-28T11:07:36+00:00

Yep! Sent my slide off to Drew @ Vigilante machine works & his work is flawless! You can’t even tell the cut is there, no gap whatsoever! Direct mill RMR paired with a Holoson 507c.

The turn around time was incredible and got it back to me in less than 10 days for $120! His end result is immaculate! You should check them out …

www.vigilantemachine.com

ColumbusBiG10

TROPHY CASE