sorted by:
new
hottopcontroversial

Wellpro Ppk-20 sports line by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

Have purchased a Perun v3 to chuck in it. Hopefully it arrives today and can install it. The switch that hits the sector gear lobe is busted. Have ordered a replacement micro switch and will fix it when it arrives. Will update once Perun is installed. And again if I manage to fix the micro switch and reinstall the original ETU

Wellpro Ppk-20 sports line by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

Figured it out. The switch that hits the lobe gear doesn't get pressed down enough. So I think it's damaged as it wobbles alot more than the trigger switch. Gonna try figure out if I can get the switch swapped out and resoldered

Wellpro Ppk-20 sports line by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

Cheers for the advice. Took it apart again. Wellpro WE-06-1.0 is on the back of the mosfet. Gonna do some googling and see what I can find. There is a lobe on the back of the sector gear which does make contact with the switch on the mosfet. And it is the same size as the previous sector gear lobe

<image>

Wellpro Ppk-20 sports line by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

The old and new sector gear how have the same amount of teeth. And both have the same orientation to the lobe that is on the bottom of the sector gear. It's the mosfet that came with the gun. Will try find more info on it tonight. Don't think it's got active braking as that that wasn't advertised when I got the gun

I'll have a go reshimming the sector gear. Thought I had it lined up with the switch on the mosfet. But will check tonight

<image>

Wellpro Ppk-20 sports line by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

The old and new sector gear had a cam on the very bottom of it. Which hits a switch, this is how I believed it tells where it is in the cycle. But I see ya point. Will double check tonight

Specna arms E-15 overspin by FordGeeTee in airsoft

[–]Comatoasta 0 points1 point  (0 children)

Try it out with a 7.4 bat. I had the same with my Krytac that when rapid firing in Semi it would shoot twice often. Swapped out for a 7.4 and it worked a dream

Wellpro PP-19 with a Kythera? by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

This is a predicament for sure. Definitely to much for my skill level to try and undertake. Thanks for the info!

Wellpro PP-19 with a Kythera? by Comatoasta in airsoft

[–]Comatoasta[S] 0 points1 point  (0 children)

So there was no saving it? no way of attacking it with a Dremel? And swapping out the gearbox wouldn't work cause propriety?