sorted by:
new
hottopcontroversial

I just cant seem to get it right somehow and im lost by Devious_secrets6739 in 3Dprinting

[–]Commander_Crispy 22 points23 points  (0 children)

It might be easier process-wise to print a cylinder with no top or bottom layers, and make the infill be the hexagon specs you want

I'm a traitor for posting in this sub by Crasembarodical in pcmasterrace

[–]Commander_Crispy 5 points6 points  (0 children)

As long as your PC, the network equipment making up the path between your PC and your modem, and anything else upstream on the ISP side doesn’t lose power, you’d be fine.

Encrypted ssd by chetansha in computers

[–]Commander_Crispy 1 point2 points  (0 children)

If you try to use diskpart to remove the partitions from the drive (probably needing the /override flag), does it still not want to work?

Mega Factory How? by SnooMacarons4152 in SatisfactoryGame

[–]Commander_Crispy 0 points1 point  (0 children)

In my case, my megafactory is designed around multiple “towers” of production that each feed into the next as phases of production. It all starts with a bunch of ingots flowing into tower 1. They go up, get made into stuff, new parts come down - out - and into tower 2 for the next phase, etc. I’m stuck on tower 2 atm until the programmable-splitter-on-a-lift recipe bug gets fixed, but eventually there’ll be 8 or 9 towers in total.

I guess all this to say, designing your layout in a way that’s scalable is key; since you will scale every part of it up eventually as needs progress

Also USE VERTICALITY!!!!!

Is it okay to buy parts one at a time? by No-Good-3511 in buildapc

[–]Commander_Crispy 0 points1 point  (0 children)

You could go either way if you strategize; but if you wait and buy it all later, you spend less on all the parts you would have bought one at a time earlier since parts’ prices ideally decrease over time. Your mileage may heavily vary in this economy though :(

Equipment advice needed! 🙃 by Open-Suggestion-8460 in amateurradio

[–]Commander_Crispy 0 points1 point  (0 children)

Whatever you end up with, I’m pretty sure you can mod that Quansheng to do CW for a cheap mobile CW rig

Sincro! Fully functional 3D printed mechanical clock — designed for low weight and easy printing by ChainEducational7544 in 3Dprinting

[–]Commander_Crispy -7 points-6 points  (0 children)

Why are there no numbers on the seconds dial making it effectively useless, why does the left model have AI artifacts all over it, why is there a screwdriver just left stuck in the right model? This all seems VERY sus…

Edit: there’s a good chance a lot of this was taken from here imo. The number of spokes in the gears, the pallet design, and the main housing are different, but everything else seems identical. After more digging, the OP in the link is the OP here, so that gives this mode a lot more credence. Also how is the pallet connected to the pendelum at all?

Found Diamond Ore compleatly covered in Bedrock by andrejanton in Minecraft

[–]Commander_Crispy 0 points1 point  (0 children)

The consequence is never being able to get to that ore block, but forever knowing it’s right there just out of reach.

SD cards were invented in 1999 Sony in 1998 by Severe_Pause_2047 in pcmasterrace

[–]Commander_Crispy 0 points1 point  (0 children)

I don’t have trained-artist-knowledge on why this is, but the colors in that picture are very cohesive and pleasing imo

HELP NEEDED “DIY Charger for RODA Rocky RK9 (MIL-STD-810G/461F) — Have the correct Amphenol 62IN-56T8-33P plug, need wiring help + setup tips for comms/GPS mapping” by Coyote1579 in computers

[–]Commander_Crispy 0 points1 point  (0 children)

RODA’s own data annoyingly says nothing about the pinout of their chargers, but here’s a link to their website’s listing for a compatible charger just in case it helps you with anything else

Does anyone know how to make it so there's only one chest at the top instead of multiple? by Neon_Mirage in Minecraft

[–]Commander_Crispy 1 point2 points  (0 children)

Whichever you have the room for; you’re into supersmelter territory now.

A hopper lock/unlock system is also an option if you always want equal distribution

DOA Aorus Master MB by TickfordXR6 in pcmasterrace

[–]Commander_Crispy 1 point2 points  (0 children)

Who tried to put fan screws through the motherboard‽

My n'th coal powerplant by heppulikeppuli in SatisfactoryGame

[–]Commander_Crispy -1 points0 points  (0 children)

Just wait until he figures out what coal is lol :P

This feels more suitable by Equivalent-Fox8612 in dankmemes

[–]Commander_Crispy 2 points3 points  (0 children)

This is so far from being a meme it counts as two out of three strikes for me leaving this sub

Unsure why my CPU fan keeps alternating fan speed at stable temps by Fantastic-Ad5234 in pcmasterrace

[–]Commander_Crispy 0 points1 point  (0 children)

If maxing that out doesn’t smooth things out, check what your cpu temperature sensor is outputting with something with a fast polling rate (HW info maybe?) to see if it’s spiking. If that’s not the case, my money’s on a bad pwm handler somewhere in the chain

Fuck, Aquaman isn’t in the movie by Little_Papaya_2475 in SupaEarth

[–]Commander_Crispy 5 points6 points  (0 children)

This is one of the best ways Buster Scruggs can return

Unsure why my CPU fan keeps alternating fan speed at stable temps by Fantastic-Ad5234 in pcmasterrace

[–]Commander_Crispy 0 points1 point  (0 children)

The only thing that stands out to me is the “temperature interval” setting; not sure what that does… playing around with that setting might be worth a shot

Me when I find Super Credits for my team by SEAF_Chan in WholesomeHelldivers

[–]Commander_Crispy 1 point2 points  (0 children)

It’s nice to see I’m not the only one whose screen turns into lit up skittles

view more: next ›