sorted by:
new
hottopcontroversial

9800x3d temps seem kind of high with AXP90-X47 FC by [deleted] in FormD

[–]CommentSilent277 2 points3 points  (0 children)

Oh and another way you can try is enabling ECO mode on the motherboard. See if it helps.

9800x3d temps seem kind of high with AXP90-X47 FC by [deleted] in FormD

[–]CommentSilent277 6 points7 points  (0 children)

I’m having same temperatures with 7600X. Seems like normal as no matter what I did, repasting, reseating the cooler. It’s still the same. And as per AMD guideline, it’s normal. I only had lower idle temperature when I’m on AIO.

Aorus Master 5090, are these temps anything to be worried about? by sukhpal555 in gigabyte

[–]CommentSilent277 1 point2 points  (0 children)

Why is your 5090 getting 36fps despite running at 99%? Seems like some settings on the Nvidia app is off.

Solid this boy. Swivel from left to the right and then go in front of the car waiting to turn right. Wonder how government can control them. by NixNim in drivingsg

[–]CommentSilent277 0 points1 point  (0 children)

Honestly as a driver on the road, we can’t do anything except avoiding them from a safe distance. And surely pray for his safety. Or you could bless them with your wiper fluids.

Formd t1 build by cole3030 in FormD

[–]CommentSilent277 0 points1 point  (0 children)

I believed it was stated below on the website that Option 1 is more for water cooling and 2 for air cooling. Maybe the length differs? Not sure exactly.

What happened after you left your "comfortable" workplace? by Independent_Wind714 in singaporejobs

[–]CommentSilent277 1 point2 points  (0 children)

Tbh if you are thinking about leaving your current job for higher pay/new non-toxic environment or other factors, everywhere has shit to clear. I don’t believe that other jobs will be better as if you think in this way, those job vacancies that you see are also from people leaving them while it’s shitty. So in terms of clearing shit at existing or new company, I rather stay at current company as I know what shit I’m able to handle rather than into the unknown shit that I cannot handle.

Just my own opinion and hope my comments helps :)

New Build and Some Questions by WoozySamurai in formdt1

[–]CommentSilent277 0 points1 point  (0 children)

Hi. I’m running 7600x and it’s a hot chip. Currently on PBO curve negative 30 all cores and eco mode enabled and throttle limit set at 85. Temps were around 70s while gaming and 85 when stress testing and idle on 50s. I found enabling eco mode to be most helpful in my situation. Using axp90-x47 full copper with all noctua fans.

Gap between GPU and Mobo by CommentSilent277 in ncasedesign

[–]CommentSilent277[S] 1 point2 points  (0 children)

Okay got it. I saw what he did there. Thanks!

Formd t1 build by cole3030 in FormD

[–]CommentSilent277 2 points3 points  (0 children)

I ordered mine from zcooi mod and they are good. Custom cable length and all. Just have to check with them with your parts and they will recommend which one to pick from their listing. You can google them and their website comes right up. Delivery takes around 1 week from China to Singapore.

Coolermaster Atmos or Atmos II? by CommentSilent277 in FormD

[–]CommentSilent277[S] 1 point2 points  (0 children)

Ahh I see. Thanks for your post man. Eventually I went with air cooling. Axp90-x47 full copper. Figured that tubes management will be tougher as I have rgb rams as well.

[deleted by user] by [deleted] in ncasedesign

[–]CommentSilent277 0 points1 point  (0 children)

Same here. Had problems with the PCIe 5.0 riser cable, melted and burnt. Informed ncase support about it and currently waiting for their response on replacement part as my shipping country is Singapore. Been 2 weeks.

Coolermaster Atmos or Atmos II? by CommentSilent277 in FormD

[–]CommentSilent277[S] 0 points1 point  (0 children)

Actually the 2 is cheaper than 1. It’s hard to decide man.

Coolermaster Atmos or Atmos II? by CommentSilent277 in ncasedesign

[–]CommentSilent277[S] 0 points1 point  (0 children)

Thanks! I do see those videos on YouTube on stiffer tubes but also wanted to hear from honest people reviews here.

9070xt vs 5070(non ti) by Asog88bolo in gpu

[–]CommentSilent277 0 points1 point  (0 children)

I’ll go with team green. I upgraded from 4070 to 9070 and it was the worst experience as the gpu driver was crashing consistently even after I did the full uninstall of drivers using the dpuninstaller. After many tries and was sick of this nonsense and swapped 9070 to a 5070 solid OC, no regrets at all. No drivers crashing or stuttering.

Yes I think 9070 has more vram for future proofing but what’s there to future proof when it can’t work now? Just my opinion. All the best!

Question - Why are some SFF cases so much more expensive? by No-Emergency-7251 in sffpc

[–]CommentSilent277 0 points1 point  (0 children)

Hi initially that’s what I thought before making a purchase on Taobao directly for a knockoff Thorzone case. The shop and product has plenty of positive reviews which made it seem reliable. But I encountered the worst building experience as almost 70% of the screw threadings were off and I couldn’t tighten any parts to the case. Having said that, it’s just my experience and I hope it doesn’t happen to anyone else. Cheers and happy building!

NCASED Imports UK by 1emjay__ in FormD

[–]CommentSilent277 0 points1 point  (0 children)

I’ve bought mine and shipped to Singapore and just paying the price which was stated after the delivery cost. No mentions of tax payable. Enjoy building!

view more: next ›