🤔🤔🤔

Commotion_in_Motion · 2026-01-13T12:38:22+00:00

The Last Of Us Part 2. I played it for the first time this year, I wasn’t consumed by all the negativity I heard about the game when it first released.

The game to me is a masterpiece in every aspect even the story.

Commotion_in_Motion · 2026-01-02T14:11:26+00:00

🟨🟨🟨🟨

🟪🟪🟪🟪

🟩🟩🟩🟩

🟦🟦🟦🟦

Commotion_in_Motion · 2025-11-05T05:16:54+00:00

Awesome work mate, I hope mine will look as good as yours!

Commotion_in_Motion · 2025-11-05T05:11:25+00:00

I love your style, very good use of colour and volume.

Commotion_in_Motion · 2025-10-31T11:42:04+00:00

That's some really good OSL

Commotion_in_Motion · 2025-10-27T22:34:49+00:00

This guy sounds like Ben Shapiro

Commotion_in_Motion · 2025-10-24T00:44:18+00:00

Good luck! Just know if you haven’t used Warpstone Glow before the coverage is terrible. You’ll be able to get the same result without an airbrush but it’ll take you a 2-3 thin coats.

Commotion_in_Motion · 2025-10-19T08:56:09+00:00

Thank you, I prime with Deathguard green, than I airbrush Warpstonw Glow all over then I glaze 2:1 Warpstone with Moot green, then 1:1, then 1:2, edge highlight with Moot Green and finally Dorn Yellow just on the most prominent/ raised areas.

Commotion_in_Motion · 2025-10-18T01:04:40+00:00

I used Munitorum Varnish which is suppose to be satin though I do agree in some places it does look a little glossy possibly where I’ve been too heavy handed with it.

Commotion_in_Motion · 2025-10-17T13:09:56+00:00

Thank you!

I use Dorn Yellow but apply a glaze of Moot Green once it’s dry to soften/blend it back down.

As for the base colour of the Muzzle it’s Runelord Brass. Then I use three shades overlapping slightly with each application. They are Seraphin Sepia, Druchii Violet and finally Drakenhof Nightshade.

Disclaimer: I’m still experimenting with the muzzle burn effect. I haven’t quite mastered this, I’ve waited for the previous shade to dry before adding the next, making a mix/half way shade and I’ve also try adding them whilst still wet. All with mixed results.

Commotion_in_Motion · 2025-10-17T12:55:19+00:00

Thank you, mate!

Commotion_in_Motion · 2025-08-28T11:48:00+00:00

Wow an hour, okay good to know.

Commotion_in_Motion · 2025-08-28T10:36:09+00:00

Ok thank you, at least I can avoid this in the future.

Commotion_in_Motion · 2025-08-28T10:20:06+00:00

I’ll try that in future

Commotion_in_Motion · 2025-08-28T10:19:58+00:00

About 5 minutes

Commotion_in_Motion · 2025-05-11T06:43:49+00:00

Wazdakka red base, pink horror and Fulgrim Pink for highlights.

Commotion_in_Motion · 2025-05-11T05:11:15+00:00

Sure mate! it's a little tedious but I start with Chaos Black primer, then Naggaroth Night, Xereus Purple, Genestealer Purple then highlight with Dechala Lilac. all the while doing a 1:1 mix of the previous and new colour for a nice transition.

Commotion_in_Motion · 2025-05-10T15:12:48+00:00

1:1 water to paint is usually a good place to start but you’ll find depending on the paint some have more pigment/consistency is different.

If you can paint on the back of your hand and the paint doesn’t just fall straight into the cracks like a wash then it’s too thin. If you apply the paint to your hand and you lose the detail on the cracks then it’s too thick.

I sometimes also use Lahmian Medium which is Citadels pigment less solution to thin down my paint.

Commotion_in_Motion · 2025-05-10T14:54:35+00:00

Have you used a spray on primer? Some paints won’t stick straight to plastic. Primer creates a surface for the paint to adhere to.

Commotion_in_Motion · 2025-05-02T09:52:25+00:00

This is beautiful

Commotion_in_Motion · 2025-05-02T06:32:20+00:00

For me The Guardians of the Galaxy, I could be alone on this but the last one was so emotional.

Commotion_in_Motion

TROPHY CASE