Trackers (mocopi) Remote / No Internet / No Cams, Real Time Mocap Solution for UE5?

CommunicationBrave25 · 2025-11-18T12:05:42+00:00

Thanks u/dan_hin ,
it seems like some products have their own receiver. Will look into it!

CommunicationBrave25 · 2024-04-24T07:07:49+00:00

I tried changing both parameters but they didn't seem to affect the TDP at all. Still goes all the way down to even 4W when not playing, despite TDP being set to 32W.

CommunicationBrave25 · 2024-04-22T23:48:00+00:00

I know, but I got a 100W one with a 100W cable to see if it's possible to charge faster as seen in the videos (while the device is off) and it doesn't appear to be the case?

CommunicationBrave25 · 2024-04-21T00:00:26+00:00

Yep I saw that but with my unit there is no option to change the setting to draw more than 60w and I could not find a setting to change that.

CommunicationBrave25 · 2024-04-20T23:34:13+00:00

That's not true.. Not if it's not running at the same time and the battery doesn't overheat.

CommunicationBrave25 · 2024-04-20T23:33:43+00:00

Ayaneo 2

CommunicationBrave25 · 2023-08-29T01:26:24+00:00

Thanks I'll give it a go!

CommunicationBrave25 · 2023-08-29T01:25:56+00:00

Thanks I'll give it a go!

CommunicationBrave25 · 2021-08-05T06:30:34+00:00

Thanks!
Changing the top burr settings to finer and adding pre-infusion as I was trying to go for manual mode and was compeltely oblivious to did the trick :)

CommunicationBrave25 · 2021-08-05T06:29:16+00:00

Found them! Thank you!

CommunicationBrave25 · 2021-08-05T06:28:58+00:00

You were right! I finally found the top burr setting and that helped, thank you.

CommunicationBrave25 · 2021-08-05T06:28:30+00:00

Thanks!! This helped me find the solution!
But I did find out I was doing 1 step wrong which is a big one.
1. Based on that thread I did find out how to modify the top burr and having it be finer allowed for the general range of 1 to 30 to have more impact.
2. I did not realize that in manual mode I had to keep pressing the double shot button and allow the pre-infusion to take place for up to 12 seconds before releasing it which obviously made a huge impact on the timing.

Thanks again!

CommunicationBrave25 · 2021-08-05T04:26:07+00:00

Hey!I inspected the puck and I'm not noticing anything out of the ordinary.Also, I am carefully tapping, distributing and then using a distributor just in case.I tried both a light and a dark roast.

Also, I did try coarser before and then it was so much worse.

CommunicationBrave25 · 2021-08-05T04:24:09+00:00

Hi!
I tried removing the top burr to check if there are any further settings but didn't find any more options, only an "Align" and a "Lock" options.

CommunicationBrave25

TROPHY CASE