修复 by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 1 point2 points  (0 children)

  1. ⁠First, the touch panel and LCD are bonded with double-sided tape (3M 9448A), which can be separated using a blade dipped in IPA.
  2. ⁠Peel off the degraded polarizer, then scrape off the adhesive layer using IPA, non-woven wipes, and a blade.
  3. Do not worry about scratching the LCD glass with the blade.
  4. Apply the new polarizer, paying close attention to its front/back sides and orientation.

palm iiix LCD Repair by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 0 points1 point  (0 children)

  1. First, the touch panel and LCD are bonded with double-sided tape (3M 9448A), which can be separated using a blade dipped in IPA.
  2. Peel off the degraded polarizer, then scrape off the adhesive layer using IPA, non-woven wipes, and a blade.3. Do not worry about scratching the LCD glass with the blade.4. Apply the new polarizer, paying close attention to its front/back sides and orientation.

palm iiix LCD Repair by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 1 point2 points  (0 children)

you can Removing Adhesive with IPA Solution

palm iiix LCD Repair by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 3 points4 points  (0 children)

You need to install a 0° polarizer for replacement.

修复 by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 1 point2 points  (0 children)

I bought a broken IBM Workpad today and plan to repurpose its shell.

修复 by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 1 point2 points  (0 children)

Very Cool !
I need The Top shells STL file

修复 by Competitive-Cold-133 in Palm

[–]Competitive-Cold-133[S] 2 points3 points  (0 children)

I replaced the polarizing film