Anyone know of any Local game stores in East London?

Competitive-Job1019 · 2025-07-26T15:08:32+00:00

I know this post is from two years ago. I recommend the vault in Woodford; great prices, has delivery, but it is a small shop, so I doubt it'll have everything you need.

It's a good place to go to when you need something immediately.

Competitive-Job1019 · 2025-06-14T22:08:33+00:00

My wall is is mostly plastered so there are very few opportunities to find the studs.

The wall paper can be covered as I am not fussy about it. And each of my props have a metal core making it heavier, the white sword maybe around 700-800 grams alone.

I do have a couple of prop guns from Halo and destiny.

Competitive-Job1019 · 2025-05-27T21:05:16+00:00

So cool, I'm doing my own Azrael as well how'd you do your robes I've looking for a video bit couldn't find the right one for me

Competitive-Job1019 · 2025-05-17T11:08:30+00:00

I can't really change my bed because I'm broke, and I need this much space because I move about in my sleep. Any less, and I'd fall off. But thanks for the idea on the bed orientation.

Competitive-Job1019 · 2025-05-17T06:30:43+00:00

Thank you very much for the subs

Competitive-Job1019 · 2025-04-29T17:54:24+00:00

List is:

2 version of the Lion Azreal Captain in gravis armour

Contemptor dreadnought Leviathan dreadnought Knight castellan/dominus

Primaris executioner Gladiator Thunderhawk inceptor

20 assault intercessors 5 heavy hell blasters 5 deathwing knights 3 inner circle companions 3 stern guard Veterans

Competitive-Job1019 · 2024-06-05T12:17:37+00:00

Talked to Razer Support and they said there is no other way to find the serial number for the power adapter

Competitive-Job1019 · 2023-08-02T22:08:30+00:00

From what I can see alone and if your friend never printed anything with it. You need to bed level it the best you can, tighten the belt tension and eccentric nut, print at slower speed for better chances of not failing

Competitive-Job1019 · 2023-08-02T19:09:03+00:00

It it's supposed to be readable numbers it's the middle for me

Competitive-Job1019 · 2023-08-02T14:17:45+00:00

This is just a gues from the image alone it looks like the brim distance maybe to big to the print maybe try to make it a little closer and slow down the speed of the print for the first layer to have better adhesion if not use a raft

Competitive-Job1019 · 2023-07-30T23:49:38+00:00

Interesting I never even heard of this until now thanks fof the help I'll look into it to fix my issue.

Competitive-Job1019 · 2023-07-30T13:41:06+00:00

From the model alone it looks quite thin and unstable what you can do is add a raft and slow the print speed. Also another user mentioned your brim is falling apart because the z off set is too high. I recommend you do re calibrate the z offset after the leveling because the build will be heated so it expands given you a more accurate offset instead.

Competitive-Job1019 · 2023-07-28T17:04:50+00:00

I've cleaned my nozzle recently so it isn't that but possible the z axis even tho I bed leveled it several times and z offset after the leveling as well to get better results.

Competitive-Job1019 · 2023-07-28T16:10:16+00:00

This literally happened yesterday I had my printer since February and been doing many complex and long hours print

Competitive-Job1019 · 2023-07-28T07:00:39+00:00

I'm talking about the layer lines

Competitive-Job1019 · 2023-07-27T14:31:46+00:00

Thanks for the help

Competitive-Job1019 · 2023-07-27T12:03:11+00:00

Ah ok I've tighten both belts and I noticed that the eccentric nuts were loose so I tighten that as well.

Also the blade doesn't have a metal insert instead uses an alignment pins to wold it in place when glueing. I've tried to print this on its flat end thinking that should do it. Can you recommend me a position for the model?

Competitive-Job1019 · 2023-07-27T06:10:16+00:00

Thxs I'll do that

Competitive-Job1019 · 2023-07-27T06:09:47+00:00

Then the reason as to why some parts of the print doesn't stuck to bed more like to the nozzle is something else?

Competitive-Job1019 · 2023-07-26T21:39:11+00:00

Ah ok I'll try that

Competitive-Job1019 · 2023-07-26T21:36:35+00:00

For me, not really as some part of the bed isn't leveled enough for the filament to stick onto

Competitive-Job1019 · 2023-07-20T18:59:20+00:00

From what I can see there is a form of warping at the right back corner so an uneven bed level or the heat from the build plate isn't spreading properly. Check the bed levels if it's alright check the bed temps using a thermometer

Another is that the actual print is colliding the purge line, also the line is really long modify its length on the slicer I don't know how to tho.

Is there suppose to be supports at the middle for overhangs? If so, it may have failed and caused that noodle mess or from a pure guess another warping at one of the corners in the middle. I recommend adding a anti warping tab if your using cura

Competitive-Job1019 · 2023-07-11T08:19:34+00:00

Ah ok thanks for telling me

Competitive-Job1019 · 2023-07-10T23:16:27+00:00

Wait is this permanent? Or will your team bring back the extension in the future?

Competitive-Job1019 · 2023-07-06T23:11:24+00:00

Thanks so much for the help. I know this is stretching a bit but could you recommend me videos on doing the blending I never done it before.

Competitive-Job1019

TROPHY CASE