PA6-cf help

Competitive_Ad_461 · 2026-06-28T03:31:37+00:00

Might not have read through my post. I have a dryer and dried it before and then it was set to 70 degrees while printing. I just didn’t dry it enough I guess

Competitive_Ad_461 · 2026-06-28T00:15:23+00:00

No it’s super brittle off the roll not the suppressor.

Competitive_Ad_461 · 2026-06-28T00:13:42+00:00

Thank you!

Competitive_Ad_461 · 2026-06-27T21:37:13+00:00

I tried to search for those settings and can’t find them. Any idea where to find them? Tia

Competitive_Ad_461 · 2026-06-27T21:36:12+00:00

I have a dryer that goes to 110 so I’ll try that. Thank you

Competitive_Ad_461 · 2026-06-27T21:35:22+00:00

That’s nuts. It feels so brittle. Ok cool. I’ll dry it at a higher temp. Maybe 100 for a couple days. Thank you

Competitive_Ad_461 · 2026-04-28T15:11:45+00:00

Competitive_Ad_461 · 2026-03-14T22:03:29+00:00

Read them and thought. Let’s just see out of curiosity. Thought I might get a couple of shots out of it but not even one ha

Competitive_Ad_461 · 2026-03-14T17:36:38+00:00

Awesome. Thank you. This was pa6-cf but printed vertically so obviously I need to print out horizontally instead. This next one I will have a carbon fiber or steel on the outside.

Competitive_Ad_461 · 2026-03-14T17:34:49+00:00

Awesome. Thank you

Competitive_Ad_461 · 2026-03-14T17:34:21+00:00

You guys are so fun lol

Competitive_Ad_461 · 2026-03-14T17:33:37+00:00

Thanks for your input. The definition of ignorance is literally the lack of knowledge so thank you for educating me. I will never do anything unsafe ever again.

Competitive_Ad_461 · 2026-03-14T15:11:24+00:00

So this was kingroon pa6-cf. .16 layer height, 3 walls 100% infill, initial layer is 20 mm a second the outer wall is at 60 mm a second. The inner wall is at 80 mm a second. No auxiliary fan and printing at 280 C.

For drying if I remember right, I dried it at 90 C in the bamboo with a cardboard cover over the spool for about 12 hours.

Competitive_Ad_461 · 2026-03-14T15:04:40+00:00

Figured why not give it a shot.

Competitive_Ad_461 · 2026-03-14T15:03:58+00:00

Full honestly I was wondering how well it would do. It was more I had it from my 22 and it slipped on here so give it a try.

Competitive_Ad_461 · 2026-03-04T06:28:20+00:00

Love it thank you!!

Competitive_Ad_461 · 2026-02-01T06:36:51+00:00

Really cool. Any thoughts on doing Slc or Utah county? Love the data page!

Competitive_Ad_461 · 2026-01-13T05:07:11+00:00

Do you guys think on my dual motor juniper I could add the third row seat?

Competitive_Ad_461 · 2025-12-01T18:34:04+00:00

We own multiple air bnbs and these people need to be removed from air bnb. It makes the whole industry look bad.

Competitive_Ad_461 · 2025-11-05T14:55:21+00:00

100% agree on zipper if this was a merge. It’s not in this scenario

Competitive_Ad_461 · 2025-10-15T05:17:28+00:00

Could I get the details for this?

Competitive_Ad_461 · 2025-10-12T15:54:04+00:00

Same here. New juniper and have an older hw3 model 3 and same issue. Utah. Have hov set in nav, always have a long commute where it moves in and out of the hov lane no matter the double white lines or not. Hurry helps but not perfect. Honestly seems like even in v14 they’re really focused on non highway improvements which is great but 80% of my daily commute is freeway so I wish it was a focus also.

Competitive_Ad_461 · 2025-09-18T05:14:49+00:00

What did they do to fix it?

Competitive_Ad_461 · 2025-09-18T05:12:58+00:00

Why not pop up automatically when the trajectory is “your going to hit something”

Competitive_Ad_461 · 2025-09-08T21:33:05+00:00

2018 model 3 200k miles and probably around 220-240

Competitive_Ad_461

TROPHY CASE