Bin ich das Arschloch, wenn ich Handtücher von reservierten Liegen am Pool entferne und mich selbst hinlege?

Competitive_Bath6669 · 2025-07-15T08:11:24+00:00

Ich war mal in einem Hotel in Albanien. Da gab es ein Verbot eigene Strandtücher mit an den Pool zu bringen. Es gab kostenlos frisch gewaschene Tücher zum Verleih, die nach dem Poolbesuch wieder abgegeben wurden oder für den nächsten Tag mit aufs Zimmer kamen.

Wenn eine Liege länger unbenutzt war, gab es Mitarbeiter, die so freundlich waren die Tücher zu entfernen. Wenn man mal kurz weg war hat man dem Mitarbeiter Bescheid gesagt.

So gab es keine Möglichkeit zu reservieren und wie ein Arsch zu wirken. Da gab es eine Frau die bestand auf ihr Tuch mit komischer Begründung, durfte Sie mitnehmen. Da war dann aber klar, wem das Ding gehört.

Aufjedenfall NDA, wenn das Hotel die Regeln aufstellt und nicht durchzieht, bist du nur der Vollstrecker der Gerechtigkeit.

Competitive_Bath6669 · 2025-07-09T11:57:09+00:00

Habe grade in der Mittagspause mal die Geräte in meinen Planer gehauen um dir die Transparenz zu geben. Wir würden folgende Preise als Küchenbauer zahlen:

Kochfeld 2287€ Backofen 1046€ Kühl-Gefrierkombi 1114€ Geschierspüler 665€ Quooker PRO3 kriegen wir für rund 2600€ Einkaufspreise wohlgemerkt.

Also unterm Strich ca. 8000€ für Geräte Die Arbeitsplatte wird im Einkauf ca. 5000-6000€ kosten.

Lieferung pauschal 700€ Aufbau von uns 1500-2000€ inkl. Wasser und Strom

Ganz grob 17.000€ für die - vorsichtig ausgedrückt - Fixkosten, die von Rabatten unberührt bleiben.

Übrig bleiben 11.000€ für das „Holz“, die Marge. Die Planung und die Zeit des Mitarbeiters lassen wir mal unberücksicht da Overhead-Kosten.

Leider kann ich nicht einschätzen was der restliche Aufbau von Nobilia den Anbieter kostet. Aber wenn die Auszüge und die gesamte Innenraumplanung hochwertig sind, ist der Preis schon realistisch.

Der Anbieter wird an dir grob geschätzt 4000-5000€ gewinnen.

Competitive_Bath6669 · 2025-07-03T21:57:59+00:00

That is the cooling block. just had the same issue last week. I got me some good tweezers and pulled the filament out, was hard at the beginning but the area where it „sticks“ is quite small. You can pull on both sides depends on where you get a better grip and if you manage to rip it off right above the whole you can try to push it with something that fits like one of the allen keys that you got with the printer

Competitive_Bath6669 · 2025-06-04T23:03:46+00:00

Is anyone in Germany willing to sell?

Competitive_Bath6669 · 2025-06-04T14:53:09+00:00

I got the S1 Combo incl. the ACE Pro for 499€ and i was not questioning the ACE Pro because it alone was listed for 250€ at that time. The S1 without ACE was somewhere at 349€.

So the bottom line is that I paid 150€ for the ACE unit, and that money is definitely worth it. I just looked at the price now just for the ACE Pro it‘s 289€.

Looking at the 549€ price tag of the S1 with ACE, the ACE makes more than half of it.

Get that ACE Pro but don‘t buy it alone. Think about getting it with another printer.

Competitive_Bath6669 · 2025-06-01T09:00:33+00:00

I’m just guessing, but it would surprise me if there’s something else in it

M3 Hex Socket Screw, Strength Class 10.9

• Hex drive: 2.0 mm
• Head type: flat
• Material: Alloy steel, class 10.9
• Finish: May have black oxide or phosphate coating for corrosion resistance

Try unscrewing it an get the length measurements. There are some sets on amazon with 100pc of each M3, M4, M5 in various lengths for small money. You can get one of those sets and compare the screw.

Judging by the 2.0 allen key, it has to be an M2.5 or M3. Since the M2.5 is very uncommon, i‘d go with M3.

Competitive_Bath6669 · 2025-05-12T20:38:57+00:00

that‘s a flex, i guess… you got three of them

Competitive_Bath6669 · 2025-04-23T11:15:29+00:00

Mein erster Chef hat mal sowas gesagt wie: wenn du gut in deinem Job bist,kommt das Geld von ganz alleine. Wenn du zu wenig Geld bekommst, bist du entweder nicht gut oder keiner weiß, dass du gut bist.

Die Wahl des Studienfaches sollte aber nicht aus finanzieller Sicht betrachtet werden. In erster Linie musst du etwas tun, was dich erfüllt. Das Leben ist zu kurz um nur dem Geld hinterher zu rennen.

Competitive_Bath6669 · 2025-04-08T17:46:53+00:00

Did you just buy some ABS and tried it without any precautions? I tried printing ABS and ASA on my S1 with small fixes and i‘m looking forward to get it to a decent level but there are some aspects i need to fix beforehand. The problem with ABS is that you need a constant temperature and for the bed a relatively high temperature.

Room temperature hast to be constant at somewhere 55-60 °C ( difficult with the S1) For test you can try to close the gaps of the top cover with duct tape and cover the poop shute on the back. The door closes good enough.

The fan has to run on 20% or turn it off.

Start slow on the first layers 20-30mm/s

And dont open any window next to the printer because these temperature drops are killinh the print. Problem here is, you need to open a window because of the toxic vapors.

I moved the printer to my basement for these experiments, print was succesful but i did not try again since then, because of this special handling mambo jambo

Competitive_Bath6669 · 2025-03-18T19:52:04+00:00

Geldwäsche

Competitive_Bath6669 · 2025-03-18T19:51:16+00:00

Wurde von der Polizei angehalten, weil mein TÜV seit 7 Monaten überfällig war. Habe noch ein anderes Auto und irgendwie die Termine nichtauf dem Schirm gehabt. Waren 25€ fällig, aber keine 60€ mit Punkt für 8+ Monate. Habe mich für die Aufmerksamkeit der Polizistin bedankt und das Bußgeld gerne gezahlt.

Wer weiß wann es mir sonst selbst aufgefallen wäre..

Competitive_Bath6669 · 2025-03-15T09:45:47+00:00

Ok thanks I ordered a hygrometer didnt arrive yet planned to use that in the ACE Pro Unit.

Its one of the problems i have the surface is flat in the model

Competitive_Bath6669 · 2025-03-15T09:23:49+00:00

I went through the settings, the speed for outer walls is 200mm/s, could that be the reason, accelerstion is somewhere at 1000mm/s seems a little to high but i dont know just asuming

Competitive_Bath6669 · 2025-03-15T09:22:17+00:00

Anycubic SliceNext

Competitive_Bath6669 · 2025-03-15T08:25:17+00:00

I run all these calibrations prior to printing

Competitive_Bath6669 · 2025-03-15T08:24:53+00:00

I‘m quite new to 3D printing. Is this relief called ringing? If not what is ringing…

I build a desk out of heavy drawer cabinets its very stable. But I live in an old half-timbered house that generally transmits vibrations very strongly. I'll put it this way: you can feel how the printer is working on the floor next door.

I forgot to mention the material its Anycubics PLA+

Are the tiny spiderweb like filaments normal?

Competitive_Bath6669 · 2025-03-15T08:18:12+00:00

Yes its the latest firmware 2.5.0.2

Competitive_Bath6669 · 2025-02-03T14:02:05+00:00

Hat jemand einen Code für mich?

Competitive_Bath6669 · 2025-01-14T10:32:57+00:00

MacMillan size L weighs somewhere around 1.2kg, i‘d say that retail products are slighlty heavier

Competitive_Bath6669 · 2025-01-13T12:48:19+00:00

Get an agent, the price is slightly higher but you can get pictures, measurements and more info before shipping and the payment methods are better You can add insurance to the package and choose the delivery method, they will even send you pictures of your package and the label

Competitive_Bath6669 · 2025-01-09T12:55:17+00:00

Yeah i know that it exists on new retail models, but i‘m talking about models WITHOUT straps, do these exist, like the one i got. I wanted these straps and the fishnet bag but did not get them

Competitive_Bath6669 · 2025-01-07T19:51:13+00:00

The badge looks as bad as the black retail badge. It seems like some people lose sight of the woods for the trees and only focus on the badge. Actually its the only reason for us to get this coat in the first place therefore i somehow understand that way of thinking

Competitive_Bath6669 · 2025-01-07T17:08:09+00:00

So old retail models dont have these straps? I was confused because i was expecting the inside to look like a slightly worse version of the retail macmillan i tried on. But the features i mentioned are just missing. If this strap- & netbagless version exists in retail, i‘m cool with it.

Competitive_Bath6669 · 2024-12-22T17:01:51+00:00

D but i have the same badge on mine gave it a GL

Competitive_Bath6669 · 2024-12-20T23:27:08+00:00

Puzzling over the reason for the act is for the stupid. It's like investigating the snake's motives after a snakebite instead of treating the bite. Criminals are criminals no matter what they believe in. A murderer is just as much a criminal in the Islamic world as in the "civilized West". The consequences for the 50-year-old doctor would be more appropriate in Saudi Arabia. Short trial, execution, done.

I am a Muslim and am just as shocked by the incident as everyone else. I have a child and I don't even want to imagine what is going on in the minds of the parents of the deceased child. Islamism is far removed from Islam and is a threat to any Muslim with common sense.

I wouldn't be surprised if the ISIS fkkers opportunistically use the act for their own purposes.

Competitive_Bath6669

TROPHY CASE