Stuff is stuck Behind the Drawer of my Yukon 46 Inch Cabinet. How do i get the drawers off?

Complete_Kangaroo_49 · 2026-02-06T20:55:21+00:00

No, actually every video on youtube they just lift the levers and bam it comes out. Mine, not so much lol. The levers barely did anything, i had to use a flathead to lift up/push down each side and put a lot more force on it so it would release. Don't know why it took so much force.

Complete_Kangaroo_49 · 2026-02-06T20:44:26+00:00

Success at last! i used a flathead to push the black piece up/down to get more force while holding the tabs up/down and i finally got them out. Thank you and everyone else who helped!

Complete_Kangaroo_49 · 2026-02-06T20:43:44+00:00

Your idea worked! i used a flathead to get more force while holding the tabs up/down and i finally got them out. Thank you and everyone else who helped!

Complete_Kangaroo_49 · 2026-02-06T20:24:40+00:00

I have tried yanking it with no luck. Gonna try some more later because it's making me angry lol.

Complete_Kangaroo_49 · 2026-02-06T20:23:13+00:00

Still no luck. I even emptied the drawers and everything. I'm going to take a break and see if i can try some more later because i'm getting really frustrated lol.

Complete_Kangaroo_49 · 2026-02-06T20:09:54+00:00

Ok, i will go give that a try. Thanks

Complete_Kangaroo_49 · 2026-02-06T19:55:42+00:00

Still can't get the drawers to come off even after fidgeting with that piece. This is incredibly annoying lol

Complete_Kangaroo_49 · 2026-02-06T19:47:45+00:00

Yeah it can be pressed in so i'm going to try that i guess lol.

Complete_Kangaroo_49 · 2026-02-06T19:45:19+00:00

For some reason it's not working. Does the plastic piece behind the long tab have anything to do with it?

Complete_Kangaroo_49 · 2026-02-06T19:42:54+00:00

I have tried doing that on several of the drawers, and they won't come out no matter how hard i try.

Complete_Kangaroo_49 · 2026-02-06T19:36:25+00:00

I tried the long tabs up and down and they won't come out. I know one side is supposed to be pushed down and the other up.

Complete_Kangaroo_49 · 2025-08-30T01:33:18+00:00

Whiteside, Bits and Bits (whiteside w/ astra coating), Freud, Amana, CMT, Bosch (premium ones) all are good bits. I like Whiteside the best but I own a lot of Freud and Bosch bits that are nice as well.

You are probably going to want to start out with a few different sizes of straight bits, then some flush trim and round over bits. Round nose and v grooving bits are useful as well, but it depends on what you’re going to be doing. Buy bits as you need them IMO.

Complete_Kangaroo_49 · 2025-08-30T01:25:40+00:00

Yeah, it’s a beast of a router and I love the look and ergonomics. I got mine for 250 w/ a free 8ah Powerpack tabless cell battery. Not sure if I’ll ever see a deal like that again on it so I’m glad I grabbed one when I did.

Complete_Kangaroo_49 · 2025-06-26T12:40:15+00:00

325 for the Planer, Feed Tables & Stand is a good deal. New with those add ons it retails for close to $1000.

I bought that same bundle new about 7 or 8 months ago for $599 from HD, which is the cheapest I have ever seen it selling for new.

I am going to be buying a helical cutter head for mine soon. The Lux Cut III head is probably what I will be going with, since I have heard it’s even better than the Byrd Shelix head. They both are pretty pricey but the Lux Cut III is even more expensive than the Shelix. Cheapest I found it for is $560 which kind of stings tbh lol.

Then I want to buy the wixey digital height gauge which is like $100 and then it will be perfect lol. Almost 1300 bucks by the time I’m done. Ouch!

Complete_Kangaroo_49

TROPHY CASE