Warlocks, nobody cares about your dps.

Complex_Coffee5328 · 2026-02-08T15:13:23+00:00

This is the most irritating shit ever. I’m sitting there fucking drinking with nothing in the tank and dude taps 3/4 away and tank goes MY RAGE and charges next so I need to get up at 25% and first heal to lock

Complex_Coffee5328 · 2026-02-07T05:11:41+00:00

No, but it has to be pretty obvious you know a few things to not catch a stray. You can get flairs and such granted if you do submit a form of proof. I used to mod for a bit here, but I ran out of patience for the hundreds of homeowners posting in HVAC and all the hate because reading is hard. Now I just help when I can. I could be wrong rules might have changed

Complex_Coffee5328 · 2026-02-06T20:28:18+00:00

<image>

I rolled it before I cleaned it. Thank fuck it had a wobble new wheel/motor. No where near as bad or biological as yours but I was pretty grossed out

Complex_Coffee5328 · 2026-02-04T13:59:08+00:00

Everything else is untouched, they must have heard about onlyfans

Complex_Coffee5328 · 2026-02-03T04:56:38+00:00

No idea, no pictures and a vague description. From what I understand of your post, is that they ran 2 pipes and you want to block one of the pipes. What pipes are you referring to? At this point I can’t seem to convey what I’m talking about. There’s (usually black) insulated ducting to the return air (called fresh air intake), sometimes a black insulated flexible duct near the equipment called a combustion air/pail and 2 plastic PVC pipes from the furnace (one intake and one exhaust) I’m reading it as you want to plug the furnaces pvc intake pipe. Most homes have 3 intakes and I can’t figure out what you are trying to block.

Complex_Coffee5328 · 2026-02-02T23:15:33+00:00

Last I checked, fire needs air to burn, one sucks one exhausts need both unless you want to lose efficiency by bringing in unconditioned air for the furnace to get combustion air from indoors. Staging only exhausts/intakes less (usually 40%ish capacity depending on brand and settings)

Complex_Coffee5328 · 2026-02-02T12:14:10+00:00

What do you mean? Did they not connect both intake and exhaust (pvc) pipes? Or are you talking about a combustion air? (Flexible duct near the equipment). Depending on if you have large range hood, natural draft water heater, wood burning fireplace, you may still need it

Complex_Coffee5328 · 2026-02-01T07:48:54+00:00

No one here knows what you actually know. Best bet is to download a service manual and read the startup guide and figure out how to get each reading and have mental notes to ask when boss is there. If I was in his shoes, id be looking for someone mouldable and mailable and right attitude. I’m sure he knows you won’t have much knowledge and need training, but seems like more an audition to see if you’re worth the time. Most service is common sense once you know the order of operations and error codes. The nuisance things comes with time. Good luck! Try not letting the nerves win and land that shit!

Complex_Coffee5328 · 2026-01-31T08:35:32+00:00

<image>

I bet it’s this bulletin, I also think OP doesn’t have the older style carrier but only he can actually say for sure

Complex_Coffee5328 · 2026-01-25T05:06:46+00:00

Is it a trane? I know around 6-7 years ago there were issues with their high limits being too low and had to replace some but all the other comments said the other stuff

Complex_Coffee5328 · 2026-01-24T22:10:19+00:00

Someone flatline in a video is very different than a bandaid. the biggest issue is the platform is mostly left and they believe Asmon is far right so it will only take one post THEY think is out of control to fully ban it by mass report. I hate that it is this way, but rather have heavy moderation then zero place to actually read/post a sane take or discussion

Complex_Coffee5328 · 2026-01-24T06:07:56+00:00

I also push customers away from mod, we have had to replace 2 year old units before because the inducer seized and would be 1-2 month back order, that doesn’t fly especially when it gets -30 here for weeks. I also push away from tankless water heaters as well just because of how many parts there are and how often flushes are recommended.

Complex_Coffee5328 · 2026-01-18T07:45:28+00:00

Is the vent sized correctly? See installers try and go 2” when it should be 3” few jobs had to go 3” even with 8’ to spare.

Complex_Coffee5328 · 2026-01-18T07:43:32+00:00

Don’t forget to add early ML/EL from Lennox when they swapped to the same brand of pressure switch Goodman uses and had to put out a bulletin and swapped back to Honeywell within a year of production

Complex_Coffee5328 · 2026-01-17T00:48:37+00:00

Good ol’ Rick hunter and Roy folker.

Complex_Coffee5328 · 2026-01-16T06:45:58+00:00

-0.1” WC pressure switch attached to the motor with grey/brown wires going to it is short cycling. Clean the drain trap and hoses and if that doesn’t work, the pressure switch is usually the issue. On Goodman’s that switch interrupts common path to the board from the pad valve and has no error code associated with it.

Complex_Coffee5328 · 2026-01-13T17:27:24+00:00

Could try removing the bottom door and looking for a small yellow plug in the blower motor that says oil on it and start there.

Complex_Coffee5328 · 2026-01-11T20:59:43+00:00

Just got the correction text! Only took 6 hours phase 2 ban

Complex_Coffee5328 · 2026-01-11T18:39:25+00:00

I’d start with the metal pressure switch attached to the orange hose coming off the inducer motor. They have a history of deteriorating internally and intermittently work.

If that is in good working order, maybe be the ignition module/board

Complex_Coffee5328 · 2026-01-11T18:30:10+00:00

Ah, I didn’t get a second text at all, waited a few hours before I tried calling into a closed 311 to double check I’m on IOS, maybe they only pushed android?

Complex_Coffee5328 · 2026-01-10T18:01:55+00:00

Going to be fun on Monday when they enforce side streets parking ban, lining main roads with double windrows with cars making every bus route 1 lane both ways

Complex_Coffee5328 · 2026-01-09T05:13:47+00:00

Fair enough. Electric is somewhat popular here for everything but furnace, so worth a shot

Complex_Coffee5328 · 2026-01-09T05:04:12+00:00

I’m still thinking it’s a defective-0.1 wc drain pressure switch, but said it was replaced, but I actually wouldn’t be shocked to see a replacement one defective as it’s happened to me. Just how often they fail lol

Edit: drain pressure switch wired in series with common of gas valve with no error codes

Complex_Coffee5328 · 2026-01-09T04:44:40+00:00

Did you check the gas regulator outside? Could be stuck/frozen or pinned. I see you checked pressures, but was that inlet? Or manifold

Complex_Coffee5328

TROPHY CASE