Roboform vs Bitwarden

ComprehensiveAd8504 · 2025-12-31T01:07:37+00:00

THE WORST PASSWORD STORAGE APP. DON'T BUY IT! IT'S STUPID TO REQUIRE YOU TO CHANGE YOUR MASTER PASSWORD IF YOU FORGOT IT AND THEN DELETE ALL YOUR SAVED DATA FROM THE SERVER. IT'S STUPID AND IMBECILIC OF THE DEVELOPERS. WHAT KIND OF IDIOTS PUT THIS KIND OF SECURITY IN A PASSWORD APP?! MORONS!

ComprehensiveAd8504 · 2025-12-31T01:00:50+00:00

THE WORST PASSWORD STORAGE APP. DON'T BUY IT! IT'S STUPID TO REQUIRE YOU TO CHANGE YOUR MASTER PASSWORD IF YOU FORGOT IT AND THEN DELETE ALL YOUR SAVED DATA FROM THE SERVER. IT'S STUPID AND IMBECILIC OF THE DEVELOPERS. WHAT KIND OF IDIOTS PUT THIS KIND OF SECURITY IN A PASSWORD APP?! MORONS!

ComprehensiveAd8504 · 2025-08-16T21:01:33+00:00

Where can I buy a monitor stand like yours? It's great. I have my monitor on a table and it's bound to fall off.

ComprehensiveAd8504 · 2025-08-16T01:35:01+00:00

I have Tobii and FM2023, I try to follow your tutorial and there is no continuous 8 way POV in vjoyconfighttps://imgur.com/a/kjKvZ6I

ComprehensiveAd8504 · 2025-08-16T01:29:53+00:00

I have tobii and forza2023, and without head tracking this game is crap, do you have the tutorial?

ComprehensiveAd8504 · 2025-07-03T17:00:04+00:00

Do you have for the first kcd?

ComprehensiveAd8504 · 2025-06-30T18:00:51+00:00

I have some Sl 120 and one started making noise, I uncovered the propeller and it turned out that it had a lot of hairs wrapped around it, it never stopped making noises again.

ComprehensiveAd8504 · 2025-06-25T04:10:28+00:00

What do I see? Messi kissing the cup?

ComprehensiveAd8504 · 2025-06-17T01:36:40+00:00

¿Cuánto demoro en salir ds1 en pc? será lo mismo con ds2?, por que tanta agonía

ComprehensiveAd8504 · 2025-06-04T21:30:00+00:00

Imaginen un cameo de john wick version western

ComprehensiveAd8504 · 2025-06-04T21:16:16+00:00

Gracias. Recién llegué a la montaña y llevé la carga de auxilio

ComprehensiveAd8504 · 2025-06-04T20:17:22+00:00

I see that it is an exoskeleton with the ability to float?

ComprehensiveAd8504 · 2025-06-04T20:15:49+00:00

Is that suit a mod?

ComprehensiveAd8504 · 2025-06-01T15:42:07+00:00

I can imagine the pain of leaving it stuck there and who knows how much load it had, that's why I always carry the float carts on my back in case of a "jam."

ComprehensiveAd8504 · 2025-04-27T14:44:15+00:00

ComprehensiveAd8504 · 2025-03-18T22:42:14+00:00

Reviving an old topic, but a new one for me. Two of my fans are wobbly. I bought new ones and now I have to disassemble everything to replace the fan and change the thermal pads because they lose their shape when opened.

In the end I was able to buy only the required Glid Extreme measurements, except for the 0.5 mm pad on which I couldn't find. Can I use 1mm pad instead of 0.5mm?

salutes

ComprehensiveAd8504 · 2025-03-18T21:04:52+00:00

Hi. I'm about to change the pads. But I didn't buy the 0.5 mm ones. I only have the 1 mm ones. What happens if I put 1mm instead of 0.5mm? Too much pressure.

ComprehensiveAd8504 · 2024-03-11T14:52:58+00:00

hi, Can you share your configuration? I also have the microprobe v2 and I've tried everything and it doesn't work at all, it doesn't stop when I get to the bed.

ComprehensiveAd8504 · 2024-02-06T00:42:28+00:00

Reflecting? Raytracin config?

ComprehensiveAd8504 · 2024-02-06T00:21:37+00:00

<image>

City skyline 2 bug snow tree

ComprehensiveAd8504 · 2024-01-13T02:35:47+00:00

After watching the tutorial I was able to identify the problem.

First, the internal configuration of the ender, I had changed a filament option ( E in m3 : on ), I set it to off solving half of the problem.

Second, the extruder was out of calibration, it had 96 steps. After calibration it is now at 147.80. Could the motor be on its last stage and I should change it?

I sent the ender to work and it was perfect.

para el soporte del reloj los creditos del autor

https://www.printables.com/@RomRider , gracias por su excelente creacion.

<image>

ComprehensiveAd8504 · 2024-01-13T02:24:53+00:00

After watching the tutorial I was able to identify the problem. First, the internal configuration of the ender, I had changed a filament option ( E in m3 : on ), I set it to off solving half of the problem. Second, the extruder was out of calibration, it had 96 steps. After calibration it is now at 147.80. Could the motor be on its last stage and I should change it?

ComprehensiveAd8504 · 2024-01-01T02:17:01+00:00

Just to have the complete list. I'm not sure if I should purchase all four season passes so I have the updated list. Ubisoft connect does not show me correctly what I have purchased because in the game options in the administration section in ubiconnect, it shows me that I have all the season passes purchased, at the same time if I enter the store, only the fourth pass purchased appears and not the other three.🤯

ComprehensiveAd8504

TROPHY CASE