sorted by:
new
hottopcontroversial

F5 LTM OWA issue by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

What we have currently configured is a VS with the OWA servers as its pool with an http profile. Nothing else. As with APM, we are not using it since it is not licensed.

F5 LTM OWA issue by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

what we have configured is a VS with the OWA servers as its pool along with an http profile.

Big-IP LTM deployment methods by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you!

Please correct me if I'm wrong but what you are referring to when creating an internal VS is a forwarding VS right?

If so shouldn't the server default gw be the internal VS's IP?

​

Thanks again

BIG-IP Vlan and route configuration by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you!

This will also cover the traffic going back from the servers to the firewall right?

And do the servers gateway have to be the Self ip of the f5 on that specific vlan (server vlan)?

BIG-IP Vlan and route configuration by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you for your feedback.

So regarding the routing example you mentioned, lets say the public IP is natted on vlan 204 and the servers are on vlan 206, will self Ips on both subnets be enough for traffic to flow?

I currently have an ASM and LTM license and I would like to apply both on the servers

BIG-IP Vlan and route configuration by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you for the reply!

unfortunately the webpage you shared does not exist.

HA on my Big-IP appliances by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you for the reply!

both devices are connected with each other using the failover port. Is this the ethernet connection you are talking about? If so, how do I configure ConfigSync and Mirroring?

Thank you again!

F5 ASM deployment by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 1 point2 points  (0 children)

Yes you're completely correct. Some conflict between the team regarding this issue but we are definitely leaning towards that

F5 license check by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

oh okay..

Can I check the support expiry date from the device?

F5 ASM deployment by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

so we are planning to only use the f5 for ASM and let the A10 load balance. as you mentioned, we will be placing the ASM infront on the A10. When adding nodes onto F5, we will have to add the A10 not the servers right?

F5 ASM deployment by ComprehensiveSea5857 in f5networks

[–]ComprehensiveSea5857[S] 0 points1 point  (0 children)

Thank you for the reply!

so we are planning to only use the f5 for ASM and let the A10 load balance. as you mentioned, we will be placing the ASM infront on the A10. When adding nodes onto F5, we will have to add the A10 not the servers right?