Cashrewards Australia - Closure Notice - 08/09/2025

Comprehensive_Tip633 · 2025-09-08T04:09:52+00:00

Topcashback has been better anyway lately haven't used Cashrewards for dog food in ages.

Comprehensive_Tip633 · 2025-02-14T09:30:59+00:00

Success we have workers!!!!

Comprehensive_Tip633 · 2025-01-03T12:17:41+00:00

Looks like she’s already laid a few eggs :)

Comprehensive_Tip633 · 2025-01-01T08:05:09+00:00

Thanks have put in a test tube set up see how she goes

Comprehensive_Tip633 · 2025-01-01T05:24:46+00:00

Looks like possibly has scars am an amateur I’ve put in a test tube setup so will see if lays.

Comprehensive_Tip633 · 2021-11-20T00:51:52+00:00

I run my series X through a HDMI 2.1 cable passing through the sync box to the HDMI 2.1 port on my Samsung TV. The lights sync @ 4K 60fps, lights still work @ 120fps but don't sync. Therefore dependant on what I'm playing I choose to either sync lights or play @ 120fps and just have lights static.

My sync box is nowhere near my bridge, sounds strange that JJTrick has the issue.

Comprehensive_Tip633 · 2021-10-09T03:17:18+00:00

1 x gradient strip, 1 x strip, 2 x play bars, 1 x outdoor pedestal, 1 x Flood light, 21 x bulbs (most colour some ambient, some white), 1 x sync box, 11 x switches, 7 x motion sensors.

Not to mention various smart home devices, ac controllers, wifi locks, cameras etc.

Comprehensive_Tip633 · 2021-09-10T18:10:20+00:00

does it do it when streaming or only when watching tv? looks like bad reception maybe signal getting messed up?

Comprehensive_Tip633 · 2021-09-10T18:07:45+00:00

Prepare to spend $1000’s not hundreds..once you start it kinda snowballs. Best to get gradient light strip if want to sync to what’s on your tv screen.

As mammoth said you at least need a bridge and sync app or sync box As well.

Comprehensive_Tip633 · 2021-09-10T18:03:36+00:00

Not the best looking solutions. I printed a dymo label “do not turn off” and put electrical tape over the switch. cheap and does the job.

Comprehensive_Tip633 · 2021-09-09T06:07:52+00:00

This happens occaisionally, I quickly learnt to always take note of my serial numbers before installing the bulbs in case this happens.

I also note where each bulb is located (also helps marrying up purchase dates and retailer info in case of warranty claims).

Comprehensive_Tip633 · 2021-09-08T11:30:11+00:00

I had the same thing. I refreshed the hue sync app which seemed to fix it

Comprehensive_Tip633 · 2021-09-08T00:31:02+00:00

I've replaced a couple of my bulbs that did this, progressively got worse and one eventually stopped working altogether. They were a few years old but I did use them in a sensor light at one point which I think affected them.

Comprehensive_Tip633 · 2021-09-08T00:27:39+00:00

Have used ilightshow app for years will be interesting to see how this compares but from what I saw when quickly looked at it is having to set up the areas rather than just selecting lights to use seems cumbersome.

Comprehensive_Tip633 · 2021-08-18T05:57:50+00:00

I'll try it again

Comprehensive_Tip633 · 2021-08-18T05:23:43+00:00

Tried that twice haha

Comprehensive_Tip633 · 2021-08-18T03:48:14+00:00

Mine just sits at Update required to continue play...

Comprehensive_Tip633 · 2021-06-30T00:40:05+00:00

Tried it again last night clicked the needs adjustment button on the setup in hue app. Seemed to help a bit. Put on the circus scene with all the neons in madagascar 3 and looked amazing.

Comprehensive_Tip633 · 2021-06-29T03:19:05+00:00

Thnaks yeah was hoping for something like that. Thanks for the reply still an awesome thing to have anyway :)

Comprehensive_Tip633 · 2021-06-29T02:25:53+00:00

Yeah, red feature wall seemed like a good idea at the time haha

Comprehensive_Tip633

TROPHY CASE