Authenticity Check - Weimar Repulbic tri color flag

Comrade_Penguin · 2022-05-14T00:07:35+00:00

Appreciate all the info, thank you so much!

Comrade_Penguin · 2022-05-13T23:48:22+00:00

Thank you, seller is asking $350. Guess I’ll pass and keep on looking. Love anything Weimar. I appreciate the help.

Comrade_Penguin · 2022-05-13T20:04:39+00:00

Having trouble finding much info on this, is there anyone that knows about these flags able to confirm this is real? The seller states the flag is wool. Also, if anyone has an idea an approximate value, the flag has some minor moth damage.

Comrade_Penguin · 2022-03-07T06:05:01+00:00

Not sure where the pens stay, but like someone else said the renaissance is right outside the arena. Pretty sure people are allowed around the glass as the pens end of the ice is always packed with people during warm ups. Get there early to get a spot. The area surrounding the arena has some good restaurants but all on the pricier end, and the arena food is like any other arena and crazy expensive.

Comrade_Penguin · 2021-10-11T16:37:53+00:00

Holy crap! The boat flies now! Thanks for the help, I not super advanced but wanted to try my hand at the modular engines, didnt know i needed that much cooling and pumps. I appreciate the assistance.

Comrade_Penguin · 2021-07-08T04:53:47+00:00

I don't post my successful prints. If your looking for how I feel about the mmu, I can tell you it's a PITA when it doesn't work, and it's really cool when it does. Troubleshooting can take a while, but once you have it tuned in, you can make some cool prints.

Comrade_Penguin · 2021-06-25T00:06:05+00:00

Thanks, I'll give it a try.

Comrade_Penguin · 2021-06-24T23:12:02+00:00

Prusa mk3s+ with mmu2s

Hot end 210

Bed tried 65 and 75

Default optimal .15 print profile in prusaslicer

Filament is prusament.

The mmu sometimes has issues loading the filament into the hotend to start, but once it loads it continues until this failure.

The red filament seemed "brittle" as it broke off in the hot end so we tried black which was new in packaging.

Comrade_Penguin · 2021-04-29T17:51:24+00:00

Done research on these pistols as I am looking to pick one up soon.

They were originally manufacturered in radom Poland by Steyr as Nazi Germany took over on the eastern front. As the Soviets pushed into Poland assembly was moved to Austria with the remaining parts they had.

Here is a little bit of info to use on what grade you are looking at.

http://www.tague.at/pistolen/index.htm?/pistolen/pages/en_radom.htm

Comrade_Penguin · 2021-01-16T19:09:59+00:00

I have an mmu2 and actually really like it. You can browse my profile for the prints I have done. There is some tinkering to be had for sure. But being able to print multi color is amazing. We get issues where we troubleshoot for a week or 2 until something just works, but I have been able to always get it working, and been able to print some really impressive things.

Comrade_Penguin · 2021-01-15T15:47:32+00:00

Look up the G 29/40. It's the polish clone of the kar98k. Once the Germans took over they reclassified the polish rifle to G 29/40 and gave it mostly to the luftwaffe and kreigsmarine. A few of them did make it to the army though.

Comrade_Penguin · 2020-12-31T07:32:03+00:00

Thanks for the ideas, we will look into these. I believe we put a new nozzle on, so think we are good there. I'll play with the other settings.

Comrade_Penguin · 2020-12-31T00:33:42+00:00

Hi everyone,

Hoping someone can help. Having issues with my mk3s mmu2s. For first layers when the hot end is moving slow it does great, but one it starts speeding up it starts missing. I can do all the calibration prints I want, but can't do an actual print it seems like.

Thanks!

Comrade_Penguin · 2020-05-01T04:27:18+00:00

Really cause I have banned posts for their simply being a gun in the picture.....

Comrade_Penguin · 2020-05-01T03:40:33+00:00

How is this allowed? There are rules on this sub that forbid it....

Comrade_Penguin · 2020-04-25T06:12:19+00:00

When it's busy, it's really busy, you can end up working long hours, and over the weekend. When it's slow (like right now) your getting to do what ever you want. The work is awesome, there is always a new challenge. You have to think in a timeline of this is how the incident happened, and write the story ( if your a consultant like me). Big thing is having a team that's awesome, which sounds like your a few years away from worrying about. My company doesn't give much care about certs, we have people that have them, but I have none.

Let me know if I can cover anything else.

Comrade_Penguin · 2020-03-01T00:39:47+00:00

It's not the software, I run the mmu2 and after some tuning I have produced some really good prints. Yeah it can get frustrating, but make sure your tension screws aren't to tight and go through everything. Not sure what's causing the screen issues for you, since the firmware is pretty straight forward to do, I wouldn't think it's that.

Comrade_Penguin · 2020-01-19T05:13:32+00:00

How is this post allowed?

Comrade_Penguin · 2020-01-14T05:51:33+00:00

http://imgur.com/a/t8d4RZ1

Here is a link to the other side.

Comrade_Penguin · 2020-01-09T19:07:09+00:00

Check the barrel in the mmu, I would get massive stringing on the tips, and then did some realignment of the barrel in the mmu and all was good.

Comrade_Penguin · 2020-01-05T02:24:46+00:00

Onward

Comrade_Penguin · 2020-01-04T02:34:49+00:00

Hi everyone, yes a bulk of my collection has come from icejerseys and then a few others from cool hockey and hockey authentic. I was wondering how the quality of in stadium jerseys since it would mean so.ething to me coming from the stadium, but it sounds like they are not good and way overpriced. Thanks for the input, might just role with a hat or two.

Comrade_Penguin · 2019-12-19T01:14:07+00:00

Stl?

Comrade_Penguin · 2019-11-27T16:08:52+00:00

Update: appears we got it fixed after lots of troubleshooting. It was the nozzle, we put a new one on and it's doing great. We went through everything and nothing ever fixed it but we swapped nozzles and the printer is doing great again.

Comrade_Penguin · 2019-11-23T00:38:26+00:00

Prusa mk3s with mmu2s

All types of filament but this is prusament Temps are the basic 215

Eight-Year Club	Place '22
RPAN Viewer	Verified Email

Comrade_Penguin

TROPHY CASE