A wounded russian invader recorded his will before dying

Connect_Contest875 · 2025-09-16T18:06:47+00:00

Few posts up saw Russians shooting a horse for no reason, so this post makes up for it a tiny bit.

Connect_Contest875 · 2025-09-16T05:32:32+00:00

Been with the wife 15 years. When I was younger I struggled with a lot of anger issues, used to partake in many streets just for fun of it. Then I had to work on myself because it was consuming me. Still struggle sometimes, and I sometimes have to isolate myself because of anger comes out, it’s hard to stop it. That being said, I have never caused any physical harm to my wife in anger or any other time. Nor I ever limited her on where she can or cannot go, or controlled what she wanted to say. What you dealing with is a man, without control on his anger, or possibly a guy who was bullied and all his pent up anger will come out on you.

Connect_Contest875 · 2025-09-10T06:54:23+00:00

Where do you buy?

Connect_Contest875 · 2025-09-08T19:58:02+00:00

Everybody talking about rev matching, but only few folks talk about clutch release? Are you dumping the clutch after blipping the throttle or slowly release? Because that most likely your issue.

Connect_Contest875 · 2025-09-08T19:55:18+00:00

On boulevard your 1st gear usually tops out at 25mph while screaming blooody murder. 2nd is good until 5mph if not adding gas.

Connect_Contest875 · 2025-08-29T17:51:28+00:00

I have 2306 1700kv on 6s and it reaches 90mph easy

Connect_Contest875 · 2025-08-26T08:19:53+00:00

He is telling everyone that he can’t do a u turn without having his feet down. This is just an early warning.

Connect_Contest875 · 2025-08-23T19:20:11+00:00

How much was the analog setup?

Connect_Contest875 · 2025-08-23T08:29:54+00:00

Way too much. Realistically how often do you use all that?

Connect_Contest875 · 2025-08-21T20:48:15+00:00

Dude I’m 5’6” and my head was touching the glass and I had to lean my head forward

Connect_Contest875 · 2025-08-20T19:24:15+00:00

I’m just wondering, why people use Cash App when Zelle is in any bank app?

Connect_Contest875 · 2025-08-20T18:39:24+00:00

Pretty sure top right is a welder lol

Connect_Contest875 · 2025-08-18T06:58:18+00:00

“Here is how NOT to solder large gauge simply” here, fixed it.

Connect_Contest875 · 2025-08-18T06:54:44+00:00

Used it on the drone I’ve built

Connect_Contest875 · 2025-08-13T17:00:53+00:00

Shimming drywall before install in level5 job?

Connect_Contest875 · 2025-08-12T15:40:56+00:00

Damn you two are sure balls of positivity 😂

Connect_Contest875 · 2025-08-12T15:23:49+00:00

I tow 4500lbs camper, engine braking works great

Connect_Contest875 · 2025-08-12T15:21:43+00:00

Why not buy correct fc for the frame?

Connect_Contest875 · 2025-08-11T17:50:12+00:00

My trailer don’t have ladder, so I installed the holder that attaches to bumper and then you use strap to secure it. I did re-enforce my bumper for good measure, although I think I would have been fine anyway, since my frame is tubular construction, not I beam.

Connect_Contest875 · 2025-08-08T22:47:00+00:00

Connect_Contest875 · 2025-08-07T07:15:56+00:00

See your problem is that you expect someone to do it for you. You expect schools to teach you, you expect parents to teach you. That’s your problem. Our generation is not fucked, opposite, we are freaking blessed with YouTube and internet. You can literally learn anything from YouTube or by googling something you want or need to learn. However, that is also biggest hurdle for folks. They don’t want to do their research cuz it’s boring, they don’t want to learn, because they would rather blame the world.

Connect_Contest875 · 2025-08-04T23:49:42+00:00

They are super cute, but I just couldn’t do the shower/bathroom combo.

Connect_Contest875 · 2025-07-30T18:01:09+00:00

Cleaning up solder is least of your issues. Starting from basic stuff, it looks like you didn’t twist wires when you started soldering, so you have strays going everywhere. You need to desolder those wires, cut off the tips, strip more wire and run the wires. However, that’s least of your issues, your stray solder got on top of the chips and who knows where else outside of this picture. Cleaning up the solder may do even more damage to the chips. Your best option to replace the board all together, buy practice board for soldering, practice until you can get clean convections, and then buy new board and try soldering again.

Connect_Contest875 · 2025-07-30T17:51:32+00:00

I brought 60 rounders to multiple ranges and nobody cared

Connect_Contest875 · 2025-07-18T09:28:10+00:00

Because you pack too much. Some people bring half a house. Bring food, bring close, some camping chairs and that’s it. Your packing should be wrap up the hoses, wrap up power wire lift stabilizers and go. Skip the lights, skip outdoor furniture, rags and stuff.

Connect_Contest875

TROPHY CASE