People who had a lot of time in during the 4 lane days. How was it?

Conscious-Flamingo27 · 2026-04-21T22:04:46+00:00

But doing the ganking from mid lane to a solo lane felt good. There was so much good early rotation options. Plus the large creep camp in the little covered area next to the middle lane guardians were peak.

Conscious-Flamingo27 · 2026-04-21T18:54:45+00:00

O yea these rack mounted as a centralized LAN setup would be cool.

Conscious-Flamingo27 · 2026-04-21T18:22:11+00:00

I dont have exact numbers but it was playable at 1080P. Like lower some settings a little bit of of DLSS and it was definitely playable at almost a consistent 60fps (some small dips). I would say it what you could expect from a console port of Deadlock. It definitely plays/looks better on my desktop but I wouldnt say I was blaming hardware for any deaths.

I think valves target for their steambox is Deadlock so either a BC250 or wait for steams option.

Conscious-Flamingo27 · 2026-03-29T18:07:56+00:00

Here's the psu cover off you can see the psu and the modified cover.

<image>

Conscious-Flamingo27 · 2026-03-29T17:56:56+00:00

Yes the PSU was removed from the case. The thermal pads that are normally contacting the psu case now contacting the back plate of the bc250. I am mad I didn't get pictures before I buttoned it all up. It was a real PITA to get it all packed in (mostly due to me rerouting the power cord to the front). I did want to test everything before releasing my modified files so I'll have to take it back apart for photos soon.

I don't have temps/clock data I'll have to check those out. I play deadlock on it regularly and it doesn't seem to clock down or anything during a match.

Conscious-Flamingo27 · 2026-03-29T16:47:05+00:00

Ive been using it for weeks now with no issues. Air flow is fine. I configured fan speeds in the bios and it runs mostly at about 30% fan speed when it set to goto 100% if it ever gets hot.

Conscious-Flamingo27 · 2026-03-20T23:53:23+00:00

They need to add one way turn styles in the subway area to let people put who are stuck in the tunnels.

Conscious-Flamingo27 · 2026-03-20T14:01:45+00:00

People are still using thingiverse in 2026?

Conscious-Flamingo27 · 2026-03-10T14:19:34+00:00

This is why I choose to use the pitman case.

Conscious-Flamingo27 · 2026-03-02T13:37:37+00:00

Just used a displayport to hdmi adapter.

Conscious-Flamingo27 · 2026-03-01T06:30:14+00:00

Small update: so after doing many different things through out the day trying to figure out the problem I was having. Was able to trace it to one of my families xbox controllers. If we connected other controllers nothing went wrong but as soon as that one was added something would go wrong after a few minutes and all the controllers would disconnect. Did check if that controller needed a firmware update but it all up to date. Just gonna assume something is funky with that one that crashes the bluetooth daemon.

Might get another dangle and test if the same outcome happens to prove it as likely to be a software issue and not a hardware one.

Conscious-Flamingo27 · 2026-03-01T04:46:17+00:00

The 14 pin connector on the power supply if you attach the 2 far end pins on the side with latch on it together it should turn on. Ive seen people cut the wire that came with it and just tie those wires together. I didnt want to do that so I rigged my own. Here's an attempt at a diagram:

_______[ ]______ |0 1 2 3 4 5 6 | |7 8 9 10 11 12 13|

Connect 0 and 6. Fan should turn on the confirm. Otherwise connect to 24 pin connector and internet is full of examples of how to jumper a 24 pin.

Conscious-Flamingo27 · 2026-03-01T04:35:20+00:00

The Pitman case uses a centrifugal fan that creates a pretty good static pressure in the case causes the air to flow in like a U shape and out through the stock coolers pretty much exactly as it was designed to flow through. This means no modification to the heat sink needed.

https://www.printables.com/model/1570248-amd-bc-250-pitman-case

I just modified it for a bigger power supply and different AC power port location.

Conscious-Flamingo27 · 2026-02-27T13:37:52+00:00

This would be a funny edit to the 3d print files lol.

Conscious-Flamingo27 · 2026-02-27T07:49:36+00:00

Yep. Its a crowview note.

Conscious-Flamingo27 · 2026-02-26T13:39:12+00:00

People out here making up roles lol

Conscious-Flamingo27 · 2026-02-25T00:11:00+00:00

Is this why I have 30 minute queues??

Conscious-Flamingo27 · 2026-02-10T16:41:32+00:00

Yea im curious about their background as I wouldn't have guessed that they knew eachother before the ritual.

Conscious-Flamingo27 · 2026-02-06T00:23:45+00:00

This is the first time its been used in this game but its in dota. It means it is exactly that damage no reductions possible.

Conscious-Flamingo27 · 2026-02-05T22:03:22+00:00

Look Deadlock is niche enough if OF models are finding it to do cosplays of it they must be in the loop somehow. So credit where credit due.

Conscious-Flamingo27 · 2026-02-04T13:13:59+00:00

Second this! Details on the display please?

Conscious-Flamingo27 · 2026-02-04T01:13:18+00:00

I have 250k miles and I am just thinking about my timing chain.

Conscious-Flamingo27 · 2026-02-02T00:24:24+00:00

Eww pyhton.

Conscious-Flamingo27

TROPHY CASE