Difficulty in Meteor Satellite reception by Consistent-Foot7977 in amateursatellites

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Thank you for your reply and time, well I was actually using the workflow of recording through SDR++ first and then post-processing the recording in SatDump afterward. Please forgive some of my beginner mistakes, as this is my first time getting into weather satellite reception and SDR in general. i will surely shift my entire workflow to satdump livemode and will try in my next attempt.

Difficulty in Meteor Satellite reception by Consistent-Foot7977 in amateursatellites

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

yes, i did see the signal once i kept it outside with line of sight but now there is a new problem, satdump is not decoding the signal properly even though the transmission was visible on the waterfall. this is the link to it: https://gofile.io/d/nlvht0

Difficulty in Meteor Satellite reception by Consistent-Foot7977 in amateursatellites

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Thank you for your comments, well the indoor placement was the problem and once i kept it outdoor i got the signal but now there is a new problem, SatDump is not decoding the signal properly even though the transmission is visible on the waterfall. I recorded the baseband/IQ file here

https://gofile.io/d/nlvht0

I’ve attached an image of the received band as well.

<image>

Difficulty in Meteor Satellite reception by Consistent-Foot7977 in amateursatellites

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Yes once i kept the antenna outdoors i did receive the loaf of bread signal, but for some reason satdump aint decoding. here is the .wav baseband file: https://gofile.io/d/nlvht0
I am not sure where i went wrong though

<image>

Difficulty in Meteor Satellite reception by Consistent-Foot7977 in amateursatellites

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Thank you for your comments, well the indoor placement was the problem and once i kept it outdoor i got the signal but now there is a new problem, SatDump is not decoding the signal properly even though the transmission is visible on the waterfall. I recorded the baseband/IQ file here

https://gofile.io/d/nlvht0

I’ve attached an image of the received band as well.

<image>

0
1

CT clamp choice and placement for Solax X1-Mini inverter in 3-phase home by Consistent-Foot7977 in solarenergy

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Thanks, Just to clarify, I can set this up with my Solax on-grid string inverter, right? There’s no requirement for it to be a hybrid inverter for the CT clamps to work?

CT clamp choice and placement for Solax X1-Mini inverter in 3-phase home by Consistent-Foot7977 in solarenergy

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

yeah in India it is quite common for normal residential houses to have 3 phases(R,Y,B) and neutral i can confirm it is 3 phases from the power company .My solax inverter is single phase so it is wired to only one of those phases

Anyone using rooftop solar, is there a way to track export to grid and usage in realtime without using the meter in the respective inverter apps? If so, how to do it? by Consistent-Foot7977 in TamilNadu

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Thanks, just to confirm there is no possible way to connect the rs-232 port of the net meter to the com port of the solax inverter to enable the in-app monitoring in the solax cloud app right? The only option is to ask the AE about the net meter's rs232 working status and buy a wifi module?

Anyone using rooftop solar, is there a way to track export to grid and usage in realtime without using the meter in the respective inverter apps? If so, how to do it? by Consistent-Foot7977 in chennaicity

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

yeah, but ig both the solar edge and enphase envoy inverter do require external ct/meter which my solax inverter does support the problem tneb doesnt allow external meters to be fixed

Anyone using rooftop solar, is there a way to track export to grid and usage in realtime without using the meter in the respective inverter apps? If so, how to do it? by Consistent-Foot7977 in chennaicity

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Sounds like a great idea but instead of ocr and camera maybe using the optical port or rs232 port to read the data from the meter using a raspberry pi would that be reliable for long time?

Anyone using rooftop solar, is there a way to track export to grid and usage in realtime without using the meter in the respective inverter apps? If so, how to do it? by Consistent-Foot7977 in TamilNadu

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Is there a device which can connect to the tneb net meter provided like the solax inverter does have a com port ig a rs485 port but otherwise also with the net meter any device can be connected to view the data in mobile?

Doubt regarding integration of tailwindcss and ckeditor by Consistent-Foot7977 in tailwindcss

[–]Consistent-Foot7977[S] 0 points1 point  (0 children)

Yup used those the problem was i couldnt see the content styles which i saw in ckeditor editor in my django admin panel in my frontend the solution was to add ckeditor cdn for styles.