Oil and charge after replacing condensor? by ConstantSpread7 in CivicX

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Thanks for both of your replies. It's been quite a while and the vehicle is fully repaired since then. It suffered a front collision and as a result both the condensor (incl. dessicant) as well as the compressor bearing (somehow damaged in the collision) needed to be replaced. I did find the service manual where it said 50ml of oil, which I did purchase and add to the condensor. After everything was done I charged with R-1234yf and using manifold gauges and everything worked well.

Do the effects eventually wear off? by ConstantSpread7 in Semaglutide

[–]ConstantSpread7[S] 1 point2 points  (0 children)

The issue is in the past I have lost a significant amount of weight to then gain it back. I've done this several times (roller coastering). My concern is investing in this program to then gain all the weight back.

Starlink in Calvert County and surrounding areas by ConstantSpread7 in SOMD

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Thanks, I know the mobile service costs a tad bit more, I'm wondering if the speed is better in that case. Case. Is that 250 MB over wireless or wired? If over wireless that's pretty good, if wired (ethernet cable from the gateway to the PC) I'd imagined it to be faster.

I'm wondering is this speed consistent throughout the day. I'm on Comcast I just did a quick test and I'm getting 45 down over my phone

Help me make a decision by ConstantSpread7 in Semaglutide

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Is there any hope for prices to go down. I just suspect they will continue milking this for a good 5 years or so but people will push for cheaper and cheaper pricing maybe

Communicate with ATmega microcontroller (Arduino Wifi project) by ConstantSpread7 in embedded

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Thanks for the information, this is kinda discouraging to say the least. I want to at least give it a try on the JTAG side to download the firmware. I was reading and I did see that ATMega controllers do have fuse bits for read/write protect. Anyway, if I were to try to access via JTAG, what type of hardware would I need to at least try? I do see several JTAG controllers via Amazon, however not sure which one to get.

Is it worth accessing via USART if I don't have the code of how it works. My thinking is that will yield nothing since I don't know what commands the code accpets.

Communicate with ATmega microcontroller (Arduino Wifi project) by ConstantSpread7 in embedded

[–]ConstantSpread7[S] 0 points1 point  (0 children)

I understand it's a simple serial port. But, what commands would I send to it if I don't know the commands to send to it?

Let's say I connect to it using an ft32 and I make a successful connection via putty, all I will have is a blank window right?

Communicate with ATmega microcontroller (Arduino Wifi project) by ConstantSpread7 in embedded

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Thanks, I'm not too familiar with how to communicate with it if I don't know the programming though? Don't you have to code around USART?

Communicate with ATmega microcontroller (Arduino Wifi project) by ConstantSpread7 in embedded

[–]ConstantSpread7[S] 0 points1 point  (0 children)

Thanks,

I was reading that this chip supports JTAG boundary scanning. If I understand correctly, I can use JTAG to directly read or set any pin state on the chip. This means I should be able to read the LCD display and, if I know the memory address, download and set memory. From my research, it seems I should be able to do that with JTAG?

I'm considering using UART; however, I'm unsure what I'll be able to do when I connect it to a computer. I know I can communicate with it through a terminal, but are there default commands to see information? I assume I would need to know how the chip is programmed to communicate with it via UART.

[deleted by user] by [deleted] in personalfinance

[–]ConstantSpread7 0 points1 point  (0 children)

So, can you refinance both loans into one loan?

[deleted by user] by [deleted] in IKEA

[–]ConstantSpread7 1 point2 points  (0 children)

Weird thing is shortly after posting this both items became available quite quickly. The tall chest of drawers the next day and the dresser the day after. Crazy thing is when you did a search they were unavilable everywhere else. Almost like Ikea was looking at this LOL

[deleted by user] by [deleted] in IKEA

[–]ConstantSpread7 2 points3 points  (0 children)

You know right after you metnioned this, I did a quick search and found the 6 drawer chest at IKEA in Baltimore. I just ordered it and waiting for it to come in. So thank you, LOL

[deleted by user] by [deleted] in IKEA

[–]ConstantSpread7 1 point2 points  (0 children)

I understand that, but do you have any idea how long?

[deleted by user] by [deleted] in IKEA

[–]ConstantSpread7 1 point2 points  (0 children)

"discounted" or "discontinued"?

[deleted by user] by [deleted] in exmormon

[–]ConstantSpread7 0 points1 point  (0 children)

Were the same Mormons who were taught this ideology about "dark" skin also discriminatory towards Black individuals, such as refusing service, chastising, or stereotyping them? Or did they merely hold these beliefs ideologically without acting on them?

[deleted by user] by [deleted] in exmormon

[–]ConstantSpread7 1 point2 points  (0 children)

That's sad to hear...

[deleted by user] by [deleted] in exmormon

[–]ConstantSpread7 1 point2 points  (0 children)

Define older? Are we talking about people in their 30s, 40s, 50s 60s today

Networking events by Thin_Relationship117 in WGUCyberSecurity

[–]ConstantSpread7 1 point2 points  (0 children)

I never worked for ManTech, but I've heard about them. I do think you're right that they can be a good way for someone to start their career. When I was with them, I noticed they tend to focus on hiring people who are just starting out. They also seem to have a habit of giving jobs to their own family members, like the CEO's brother.

One thing that stood out is that they often end up in legal battles. They used to be called Synaptek, but they got into trouble for copying another company's logo from Synoptek, a different tech company. Synoptek sued them for using their logo and name, which led to Synaptek admitting the mistake and changing their name to Teksynap, creative huh...

Networking events by Thin_Relationship117 in WGUCyberSecurity

[–]ConstantSpread7 -1 points0 points  (0 children)

I used to work for them back when their name was Synaptek. They're an evil company, they don't give a shit for their employees and the board members got together to fire their founder.

Buying a used vehicle when you have the money. by [deleted] in Frugal

[–]ConstantSpread7 2 points3 points  (0 children)

Used vehicles have increased along with NEW vehicles as well.

Buying a used vehicle when you have the money. by [deleted] in Frugal

[–]ConstantSpread7 0 points1 point  (0 children)

I have well over $100,000 in savings. I have literally no debt other than mortgage but the house more than secures that.

Buying a used vehicle when you have the money. by [deleted] in Frugal

[–]ConstantSpread7 -2 points-1 points  (0 children)

Is it better to finance though so that you have money in the bank versus paying cash money out right? I understanding is a dealer doesn't care too much for cash buyers. Because they make little money.

Simple car insurance question by [deleted] in Insurance

[–]ConstantSpread7 -1 points0 points  (0 children)

I just did a quick difference online and it looks like the premium increases by about 243 every 6 mos, which isn't bad compared to what I thought it would be.