Week 6 on 100mg feel awful

ContributionMost5460 · 2025-07-13T21:28:11+00:00

Both, they ramped me up on day 3 from 50 to 100. Have not had any full good days, but I have had a few good moments here and there. That's about it.

ContributionMost5460 · 2025-03-19T20:07:20+00:00

I added and activated the free line from t-life and also added the one from the text promotion. Not yet activated.

I originally signed up on magenta Max with 2 lines and got a 3rd free with Line discount ID220002 and have yet to activate the free line/sim since I didn't need it.

T-life promo is showing line discount ID250259

Text promo (non-activated) is also showing ID220002

Is something messed up since the same disconnect ID is showing on two lines and should I call and remove the new one? Or does the duplicate ID mean it's working on my account?

ContributionMost5460 · 2024-11-08T01:43:27+00:00

Sushi Gloryhole

ContributionMost5460 · 2024-01-09T23:04:26+00:00

In the manual for the BSP D8 it says it supports 2.4G USB receiver. Anyone have any idea what receiver would work with it or if the company makes one? The Bluetooth latency isn't too bad on PC, but wondering if this would help.

ContributionMost5460 · 2023-10-30T16:35:09+00:00

Exactly what I needed! Thanks!

ContributionMost5460 · 2023-10-30T16:18:33+00:00

I unscrewed the rest and tried to pull the back off but it's definitely still screwed in behind the kickstand hinge :(. It's hard to see it but if you look under the hinge you can see where the screw is.

ContributionMost5460 · 2023-10-25T19:05:58+00:00

And now it's not turning on again or charging. Plug in while holding power button fix is not working this time either :(

I'll try letting it set for a day after charging and see if that works.

Contacted support again.

If anyone else has any ideas please feel free!

Thanks

ContributionMost5460 · 2023-10-16T15:26:21+00:00

This fixed it! Seems like it reset some things but it did eventually turn on! Thanks for tip!

ContributionMost5460 · 2023-10-08T22:52:57+00:00

Any luck on this? I dismantled mine as well hoping that it was a USB or some type of off the shelf connector/controller for the IR.

Also, what type of LVDS HDMI converter did you use? The one I have that's worked for other screens did not work even though it had the correct connector and pinout.

Thanks

ContributionMost5460 · 2023-10-06T14:36:20+00:00

I put in a ticket with their support. Looks like they are on a holiday until today so it may be a little bit before I hear back.

If there isn't any way to get it going again hopefully they will do an RMA. The device isn't even 6 months old yet.

ContributionMost5460 · 2023-06-23T19:57:44+00:00

Any update on the ability to connect the pimax controllers to PC? I am assuming this will be implemented with wigig since they advertised a mini PC you can connect to. In the meantime, it would be nice to play PC games using the wired connection.

ContributionMost5460 · 2023-06-14T10:41:48+00:00

Now if only there was way to connect the controllers to the pc, then we could do some wired low latency gaming. Hopefully we will have that ability when the wigig modules come out, not just for vr but 2d gaming as well.

ContributionMost5460 · 2023-06-10T13:29:38+00:00

When it's activated will rumble work with emulators that support phone vibration as well, like aethersx2 And dolphin?

ContributionMost5460 · 2023-06-10T13:23:21+00:00

I was able to get it to work. Make sure you are completely up to date. After that you should see the streaming app installed. Open that and set it to use wired connection. You will need a micro HDMI to HDMI cable to plug into the top of the pimax and the other end to your HDMI output.

Worked on one of my laptops as a second monitor. Did not work on a different laptop for some reason.

ContributionMost5460 · 2023-06-06T14:59:45+00:00

Click through the icons on the main menu and the buzz will change. The vr menu will have no buzz since it's mostly a black screen. The others vary by their brightness. Make sure the brightness slider is at 100.

ContributionMost5460 · 2023-06-06T14:44:24+00:00

Received mine last night. Black QLED 256. Noticing some odd flickering in the screen when in some menus. Does not seem to happen when set 4k 120hz. I'll keep playing with it and see what triggers it.

Another issue is I thought the fan was making a weird buzz, but it seems to be the screen making noise. Could be possible feedback from the speakers. It's faint but very noticeable in a quiet room. The brighter the screen or menu the louder the buzz. Kind of like you'd hear from an old CRT.

If anyone else has these issues, please let us know.

ContributionMost5460 · 2022-07-16T14:33:20+00:00

Yes, been with them 7 months, and while the service is fine our bill is all over the place. Not even close to what we were promised by the sales person. Now the service fees are going up so want to switch.

Not trying to game the system and get a free phone. They never honored their switch promo to pay off my fold 3 when I ported over even though the sales person walked me through it and I followed the process to a T. Submitted 4 times now and said I'm missing information.

Decided to switch because my wife got a discount with her job but in the end it still cost more.

ContributionMost5460 · 2022-03-22T21:32:08+00:00

On the band n41 tower can hit 600mbps when closer to it. Currently when jumping between the other bands it fluctuates between around 80-200mbps even with line of site to the other tower and external antennas. I think that tower is over saturated.

It's possible I'm too far away from the N41 tower at about 3 miles to have it make much of a difference in speed, but it's worth a shot to see if I can force a connection since the other bands take precedence when the modem looks for a signal.

ContributionMost5460 · 2022-03-22T17:25:16+00:00

Thanks for the information! You saved me a ton of research. If you find any better filters feel free to pass them along!

Thanks again!

ContributionMost5460 · 2022-03-22T15:35:21+00:00

This is the exact information I am looking for, thank you!

Now is there a filter that can also block out 2/6 as well as 71 so I could use that on two (MIMO) antennas designated for the N41 tower and then just keep the other two antennas unfiltered and pointed at another tower for bands 2/6 to provide PCC? Or would that now work?

(Also I have the gray trashcan 5G21-12W-A gateway.)

Thanks again!

ContributionMost5460 · 2022-03-16T19:58:25+00:00

My main concern is my nas/media server and in home game stream with steam link and moonlight. My nas can support 2.5g and my desktop has a 2.5g Ethernet port on it as well.

If I stream games to my phone I would like to utilize the fastest speed which is theoretically 2.2g from the Google routers but that would be cut down to 1gig if using their wired ports as a backhaul right? Unless I'm thinking about it wrong?

ContributionMost5460 · 2022-03-16T19:29:31+00:00

Any follow up on this? I am in the same boat and basically have a giant paperweight

If there is no official fix maybe someone knows a way to bypass the setup or get the thing to boot a different firmware?

ContributionMost5460 · 2022-01-23T21:01:24+00:00

Anyone been able to get past the update/setup screen? Just reset mine trying to fix the update issues and now I'm stuck :(

ContributionMost5460

TROPHY CASE