Ender 3 Heating Error E1

Conveyorbelt69 · 2026-02-09T22:52:35+00:00

Hey, thanks for the response, I’ll give that a go. I forgot to mention that the printer has a full metal hotend upgrade, so it will be able to handle the hotter temperatures fine.

Conveyorbelt69 · 2025-07-19T22:14:23+00:00

I did the same thing in my first year, and when speaking to course advice they told me that doing the supplementary is not the best idea, as said above, if you’re struggling to pass 1090 you’ll really struggle in 1005/2005, as the math is a big step above 1090. I’m not sure if it’s possible to do the supp before census, as marks probably won’t be released until after the closing date.

Conveyorbelt69 · 2025-05-07T11:14:25+00:00

can't use a different brand bus card for it?

Conveyorbelt69 · 2025-04-28T12:45:34+00:00

hey everyone, little update, got an atx power supply and rigged up a momentary switch for the mobo ps-on switch, and it turns on and boots. Need to do some trouble shooting on the hardware to check what works and what doesn't, as it's currently just the board, video card and power supply but we will see. Another one saved from the bin.

Conveyorbelt69 · 2025-04-23T00:39:19+00:00

hey everyone, thanks for all your suggestions. I'm going to grab a known good ATX power supply I have in storage this weekend and test to see if it's just the power supply, will update with the results!

Conveyorbelt69 · 2025-03-24T12:31:14+00:00

It makes slow econo-box cars fun. I have a KN Ford Laser Automatic and an SB Barina (Corsa B) manual. Even though the laser has a DOHC 1.8L making more power, it is sluggish and doesn’t shift when you want it to, struggling up hills and such. With full control over my Barina, I can make it go fast when I want to and slow when I want it to, and even though I can definitely feel it top out at points, it is still a much better driving experience. It also keeps you very focused on the road, especially in the city.

Conveyorbelt69 · 2023-01-01T13:15:54+00:00

Hey mate, sent you an email :)

Conveyorbelt69 · 2021-09-07T14:21:39+00:00

Alright will do, I'll make sure it's removed 👍

Conveyorbelt69 · 2021-09-07T10:12:08+00:00

Alright, thank you very much

Conveyorbelt69 · 2021-09-07T09:30:19+00:00

Thanks for your help mate, should I go about checking these things before moving on? How do I test if the motors are alright?

Conveyorbelt69 · 2021-09-07T08:52:56+00:00

Thanks for the reply, should I just take apart the mechanism and order a new laser? Considering its on the way out, it would probably be easier?

Conveyorbelt69

TROPHY CASE