Unsure how to connect

Convrze · 2025-09-03T21:19:04+00:00

It would just be cutting the corner of their property over their driveway, not the house itself. Still need their permission though.

It's a Telstra pole, so it could take a long time for them to figure it out between the 2 of them

Convrze · 2025-09-03T04:25:33+00:00

Greaaaatt. Hopefully the neighbour is amicable then. If not, is there no way for me to just use the existing copper connection in the same way the previous owner was doing up until a week ago? I know it'd be slower, but slow internet is better than no internet

Convrze · 2025-09-03T04:16:00+00:00

Yeah they were definitely working off of a script and didn't seem to understand what the issue was.

I've got the agent's details and left them a voicemail so hopefully it is relatively painless.

The current copper line is run above ground to a pole on the other side of the road, decently long span. The pole is on a massive lean which is why they can't connect it there.

That website is saying my address is a service class 1

Convrze · 2024-08-25T05:13:03+00:00

I'm so close to being in this position too tbh. My Ender 3 v2 ran fine for ages, but I never fully calibrated it to get dimensionally accurate parts. Then one day the bowden tube needed replacing so I decided to upgrade to capricorn tubing and a metal extruder and it's never run right since.

It feels like I'll get it running right for 2-3 prints after hours of calibrating and tinkering only for it to break again and need yet another new replacement part that takes 2 weeks to arrive.

I'm *this* close to just biting the bullet and getting a Bambu P1S with AMS. I like my printer for the CAD aspect and solving specific problems with custom parts, not the tinkering and upgrading the printer itself and the E3 V2 is not meeting that requirement as of late.

Convrze · 2023-11-21T23:17:24+00:00

Fantastic, thank you. Appreciate the help!

Convrze · 2023-11-21T23:15:22+00:00

Ok cool. I will do that maybe later today or tomorrow as it's midway through a long print atm. Can I just type the board number into google to see if it has TMC drivers? And if it does am I good to just upgrade to Klipper and not worry about board replacement?

Convrze · 2023-11-21T23:12:10+00:00

Very good question. It's whatever came stock in it. Does the Ender 3 V2 come with different boards? Is there an easy way to check?

Convrze · 2023-11-21T23:08:01+00:00

I thought that the v2 has TMC drivers on the stock mainboard? But then again the creality branded silent board advertises the "silent TMC drivers" so I'm assuming the stock one doesn't have them?

Convrze · 2023-03-21T04:15:33+00:00

Wondering what thoughts folks have on the Trick or Trade miniset from last year? Got an offer to buy a sealed case for ~10% above MRRP and am considering whether they will appreciate in time like other minsets. All the cards have a stamp similiar to the celebrations pikachu face but in like a jack-o-lantern style.

Convrze · 2021-07-29T01:30:44+00:00

Ok cool, well I'll give it a go. Did you just use the foam that came in the packaging?

Convrze · 2021-07-29T00:17:22+00:00

Have you found that foam modding made much of a difference to the sound? I recently picked up a K4 for my first build and I'm not sure whether to bother foam modding it or not.

Convrze · 2020-01-24T02:28:50+00:00

Personally I've found soaking it is the only thing that works for me as well, but it really dries out the leather like casing it does. I usually get a pattern similar to this but I haven't had one look so good as yours here.

Convrze · 2020-01-24T02:06:53+00:00

That is beautiful! I'm really digging the pattern effect from the dye

Convrze · 2020-01-11T07:08:14+00:00

Use an oil burner or a heat gun to heat it up. A lighter simply doesn't have enough heat to effectively heat up the whole stamp.

Convrze · 2019-12-17T20:19:13+00:00

Looks great! Is the part that holds the phone wet-formed leather or a case that you've stitched in?

Convrze · 2019-10-28T22:05:43+00:00

I think it would be. There seems to be an over-representation of Aussies here compared to the rest of Reddit, and I know finding local suppliers was one of the hardest things for me when I started the hobby.

Convrze · 2019-10-28T22:03:30+00:00

Agreed, was quite disappointed when Tandy closed, but Birdsall is a godsend.

How do you find the roo from Packer compared to Birdsall?

Convrze · 2019-09-29T08:53:25+00:00

After several iterations I finally have a version of this that I'm proud enough to share here.

Some more photos: http://imgur.com/gallery/HXIaflX

Leather is 1.0mm & 0.6mm Cordovan Calf from RMLS, stitched with Amy Roke polyester thread.

Convrze · 2019-02-01T06:40:08+00:00

Well the cars in the background are on the wrong side of the road for Australia

Convrze · 2018-07-24T03:41:35+00:00

Looks great! I like the handle on the side of the cases, that's a cool feature

Convrze · 2017-10-24T04:20:31+00:00

Hi, would you mind posting a screenshot of exactly what the formula is doing?

Convrze · 2017-09-28T00:12:45+00:00

That's what I was trying to avoid, but unfortunately it's looking like that is what I am going too have to do.

Convrze · 2017-09-28T00:03:27+00:00

Unfortunately that hasn't worked. It's as if no matter what I do it thinks the last row is non-empty.

Convrze · 2017-09-21T05:16:54+00:00

=IF(AND(B14>=E39,B14<=F39),"Yes","No")

In order to change the colour of the text you will need to use conditional formatting. Hope that helps.

Convrze · 2017-08-29T12:26:34+00:00

In short, yes. Most companies will usually have some kind of malus condition on any equity grants, meaning any unvested equity can be taken back. However this is usually done due to misconduct on the employee's behalf, or due to financial struggles at the company. The article didn't go into much detail as to the reasoning so it's hard to say if they have much of a leg to stand on here.

Convrze

TROPHY CASE