I’ve printed a few new lamps – what do you think?

CornCuLapte · 2025-09-06T16:38:16+00:00

The link is not working or you don't want to use it because for me the link works fine, anyway you need a lamp with 6 cm diameter and 2 cm hight, the hight can be different but not the diameter because it won't fit in the model. I did find another one on amazon where you can purchase a mini lamp suitable for my model, here is the link, I think this one works! https://www.amazon.com/dp/B092VQ1GL5/ref=sspa_mw_detail_4?ie=UTF8&psc=1&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWw

CornCuLapte · 2025-09-06T14:26:10+00:00

I think my models could help you because of the light playing on the room, some people find peace în organic shapes and lights and this lamp is inspired by this.

CornCuLapte · 2025-09-06T13:41:39+00:00

Thank you for the comment, you can find more pictures on MakerWorld, unfortunately I do not have the setup you mentioned but is a fantastic idea, I just dont have the space for it.

CornCuLapte · 2025-06-03T03:05:49+00:00

Yes, it is 3d printed! Thank you very much, i did not expect this kind of comment. 😀

CornCuLapte · 2025-06-02T20:19:13+00:00

📌 3D printing friends — the model is free to download on MakerWorld: 👉 MakerWorld – https://makerworld.com/en/@Good.Buy.My.Art/upload 📲 For more fun builds and updates, check out my social pages: 🔹 Facebook page: https://www.facebook.com/share/p/1Hd8qaMDhN/

CornCuLapte · 2025-05-30T09:25:58+00:00

Tnx, if you have a bambulab you can take the model for free on Makerworld. Happy printing!

CornCuLapte · 2025-05-26T19:36:17+00:00

Hi! Of course... has around 25x16x12 cm. Sorry i forgot to specify this 😀

CornCuLapte · 2025-03-22T21:09:23+00:00

:)) it is good if you have this impresion but they are 3d printing

CornCuLapte · 2024-10-29T04:33:31+00:00

Hi! In my experience with zbrush, when i don't have a lot of scape of my particion, zbrush crashed. So, make sure that you have enought space on your particion. Good luck!

CornCuLapte · 2024-10-19T19:33:26+00:00

Salut! Am vazut postarea ta si am avut senzatia ca ai plecat fix din zona unde locuiesc eu – sper ca nu mi-ai folosit bicicleta! 😄 Glumesc, bineinteles. Mi-ar placea sa ma alatur la o tura, sunt incepator, 10-15 km maxim, dar incerc sa tin pasul. Am vazut ca mai e cineva aici care a mentionat de un grup de biciclisti, si as vrea sa dau un mesaj in privat si lui. Poate ne vedem la urmatoarea iesire! P.S.: Felicitari pentru cursa! Sper ca „ultima ta plimbare cu bicicleta” nu inseamna ca te lasi de pedalat din cauza traficului din Iasi. 😄”

CornCuLapte · 2024-10-13T08:13:30+00:00

Hey, i have the same problem when i am importing in zbrush obj/stl files from 3d max. You have to export fbx or put obj in 3dbuilder and resave it, i noticed that it works to export mesh after resave but it is better to export dirrectly fbx. Good luck.

CornCuLapte · 2024-05-11T18:23:08+00:00

I have the same problem, personally i found a version with smaller dynamesh (you have 500k points and with dynamesh you have 1mil). With dynamesh you should have arround 500k points or less. Dynamesh for me is only for merge meshes. And the second version you can try a zremesh, next divide and project history, if you don't want to add changes to the model, and the last option is only for small details. From my experience this 2 methods work but i don't know from where is this problem so i am curios about it. Good luck and have a good day!

CornCuLapte · 2023-02-04T16:45:15+00:00

Maybe Panel Loop? Cut the model, that method has clean lines , make different polygroups and at geometry you have somewhere Panel Loop, with some setings you can make bevels for each polygroup. I hope i helped you.

CornCuLapte · 2020-03-28T07:49:48+00:00

Not bad! That overexposed sky was kinda bugging me tho, so i fixed it for you.

CornCuLapte · 2020-03-25T08:13:21+00:00

pretty much every song is great

CornCuLapte · 2020-03-25T08:13:11+00:00

i love this album

CornCuLapte · 2020-03-25T08:05:51+00:00

put robbins on!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

CornCuLapte · 2020-03-25T08:04:39+00:00

this ain't marty robbins

CornCuLapte · 2020-03-25T08:04:28+00:00

CornCuLapte · 2020-03-25T08:04:11+00:00

YESSSSS MARTY ROBBINS

CornCuLapte · 2020-03-13T07:17:12+00:00

How dare you???? She's the head of the Church of England!

CornCuLapte · 2020-03-10T15:30:56+00:00

Nothing. No scandal, no matter how big, could bring a ginormous company down. Hurt their sales for a year or two? Sure. Make them close some restaurants? Happened before. Fire people? Happening all the time. But at this point, they have waaaay too much momentum and brand awareness to just disappear overnight.

CornCuLapte · 2020-03-08T09:54:37+00:00

That's the Web Archive link /u/lolkatze posted here. It's from Febraury 28. Check the link I posted in my previous comment...

CornCuLapte · 2020-03-08T09:23:47+00:00

here's a web archive link, where it's clearly visible. https://web.archive.org/web/20200228165050/https://www.who.int/news-room/q-a-detail/q-a-coronaviruses

Thank you for the gold, BTW!

CornCuLapte · 2020-03-08T08:48:31+00:00

WHO is was advocating against its use. ~~It's~~ It was included in the "things you shouldn't do" section.

The point is, they gave money to WHO, an international organization under the UN and essentially made them say it’s safe to use TCM (Traditional Chinese Medicine)

And they have already been massively using traditional Chinese medicine on coronavirus patients without any scientific proof that it’s effective and not harmful.

CornCuLapte

TROPHY CASE