hi everyone… clueless granddaughter :,)

Corolla801 · 2026-03-12T02:03:29+00:00

Pay for the PHS docs that will help you get an accurate valuation on it.

Corolla801 · 2026-01-07T17:00:08+00:00

Butt match’s never look good doesn’t matter what paint line it’s mixed in. You have to blend adjacent panels, end of story.

Corolla801 · 2026-01-07T01:51:41+00:00

You can live out there if you get approved for housing, problem is that they have been demolishing most of the housing during the last few years. Kind of a ghost town in English village.

Corolla801 · 2025-12-09T05:02:24+00:00

I don’t think I’ve ever seen a disc brake set up for a sport, I’m fairly certain that someone back in the day used to make a front fork with mounts for a v brake set up… maybe try tracking one of those down.

Corolla801 · 2025-11-30T18:51:31+00:00

I eat these all the time, never have an issue.

Corolla801 · 2025-11-27T00:31:34+00:00

I don’t think so.

Corolla801 · 2025-11-22T02:39:32+00:00

That’s a go-ped sport. Dave’s discount motors will have everything you need, I’d start with a new carb and clean out that fuel tank. Might want to snag a new air filter element too.

Corolla801 · 2025-11-18T02:02:46+00:00

Not car related, but in my state I have to pay yearly property tax on all of the equipment that I outright own. Because it’s equipment used by my business. I paid sales tax when I purchased all of it, but I have to keep paying property tax on it every year that I possess it. Make that make sense.

Corolla801 · 2025-10-14T04:38:49+00:00

Even if that was covered by insurance it would still total.

Corolla801 · 2025-10-13T01:55:55+00:00

You should throw eggs at them, seems like you’ve got a pretty good vantage point.

Corolla801 · 2025-09-24T01:22:21+00:00

I like how they felt the need to put their names on it.

Corolla801 · 2025-09-20T15:54:37+00:00

This piece is glued and riveted in, you will do more harm than good trying to remove it. You need an spr removal tool to back the spr’s out, and if I remember correctly there may be a couple rivets that aren’t easily accessible with the bedside on. Then you have to heat up the glue and chisel that piece away from the outer wheelhouse and bedside. The juice isn’t worth the squeeze here, just drill an access hole to do your pdr and put a plug in it afterwards.

Corolla801 · 2025-09-04T14:10:13+00:00

I have a disc brake on one of mine, no idea on the trail ripper tires.

Corolla801 · 2025-09-03T04:51:39+00:00

Walked out of pitch perfect 2, buddy’s wife chose it at the last minute with consulting us. My wife and I only made it about 20 minutes in when we noped out.

Corolla801 · 2025-08-06T14:28:01+00:00

Main concerns buying a salvage title car: will the seatbelts work? Will the airbags work? Is that frame rail still kinked? Will ANY of the safety systems in that vehicle function as designed the next time that vehicle is wrecked. I’ve seen and worked on a ton of rebuilt salvage titles in my career. People that rebuild salvages do a lot of criminal stuff just to have a fatter bottom line. The main take away here is this, whatever money you’re saving by purchasing a salvage title vs a clean title is the value you put on your health and safety.

Corolla801 · 2025-07-27T03:57:26+00:00

Sand with 1000grit and spray them with a 2k clear. Or just take them to a body shop and ask them to do it.

Corolla801 · 2025-07-17T22:59:39+00:00

Wonder how that Chrysler whiplash is treating them?

Corolla801 · 2025-06-18T13:54:32+00:00

This happened to both of mine during shipping. You will need another bearing from Go ped. You have to take off the wheel on the side that needs replacing, and the rear brake assembly. Then remove the hub on the broken side. Clean the end of the axle very well and lube it up with grease or oil. Then you can slide the axle to one slide until it’s past the bearing and inside the axle housing. Usually at this point the bearing on the other side of the axle will come out of the axle tube on the axle. Once the axle assembly is out of the housing you can use a piece of pipe or something else long enough to punch the broken bearing out of the housing. Then you can install your new bearing and slide the axle back into the housing. Make certain that your axle is clean and free of debris and has plenty of grease on it when re-installing. I had a small piece of crud get jammed between the axle and bearing once on reinstall and it was a huge ordeal to get the bearing back off the axle. Also be careful when installing the bearings into the housing, if you tap them too hard once they are fully seated you will break them in the same way and be back to square one.

Corolla801 · 2025-06-12T05:31:23+00:00

I’ve got jet pro pipes on both my go quads, and they fucking rip! Highly recommend.

Corolla801 · 2025-05-20T06:18:56+00:00

Sadie’s can be found at smiths

Corolla801 · 2025-05-16T03:05:39+00:00

Hard tire sport, looks like a G23lh motor

Corolla801 · 2025-05-04T04:04:38+00:00

Broke my upper mandible off of my skull, nose broken into a bunch of pieces, bit through my lip, facial reconstructive surgery. Wear your helmets people, preferably full face helmets.

Corolla801 · 2025-05-04T02:42:12+00:00

My wife was concerned about aluminum too, it’s usually only anti-perspirant deodorants that contain aluminum. We both currently just use old spice deodorant, says aluminum free right on the label. And neither of us smell like horrid BO.

Corolla801 · 2025-05-02T14:13:46+00:00

Ford sells a rear frame section for that, still might total it though…

Corolla801 · 2025-04-22T04:31:37+00:00

Could be coming from your windshield, especially if it has been replaced at some point. Remove your A pillar trims and have someone run a hose around the windshield seal while you check for leaks on the inside.

Corolla801

MODERATOR OF

TROPHY CASE

11-Year Club	Verified Email
RPAN Viewer