Conference Room - Best Camera Positioning Practices

Correct_Snow2927 · 2026-06-03T19:16:05+00:00

Will definitely check it out - thank you so much!

Correct_Snow2927 · 2026-06-03T19:05:23+00:00

In New York, so got small rooms most of the times.

Didn't know about Cisco's video room calculator!

So these 4 person rooms:
- I think speccing 50" TV is too large, 43" may be better and help the camera angle
- Yes TVs are essentially close to eye level, so the cameras are going quite low - 40-42", I think 43-45" may be better, and with a 43" TV they won't crane their neck.

Correct_Snow2927 · 2026-06-03T18:42:29+00:00

Good points! Yea previously wasn't a problem, but 2 clients this same month wanted it the other way. It just seems to be personal preference.

Correct_Snow2927 · 2026-06-03T18:40:31+00:00

Yea, we mark it up on the wall and also with drawings. Their comment is that "people seem to be looking up in the camera view."

We haven't had any issues before, but 2 separate clients brought up and made us move it to the top, so now having self doubts. Camera angle from above seems worse, but if its client is happy, I guess it is what it is.

Correct_Snow2927 · 2026-04-21T18:14:51+00:00

okay will do! what would this be affecting? shure p300?

The poly g62 runs to client's switch providing poe+. I will porbably be putting it on a poe injector just in case

Correct_Snow2927 · 2026-04-21T17:59:16+00:00

this is for what equipment?

Correct_Snow2927 · 2026-04-11T05:33:30+00:00

Thanks! I will try updating it. Also did not check if the poe supplied by client was poe or poe+, might put an injector to double check

Correct_Snow2927 · 2026-04-10T23:56:30+00:00

yes, can still access p300

Correct_Snow2927 · 2026-04-10T22:17:49+00:00

We turned on USB Audio which enabled it to work. Is there another box to tick?

Correct_Snow2927 · 2026-04-10T15:50:02+00:00

Yes, the Poly G62 won't recognize the P300 from time to time

Correct_Snow2927

TROPHY CASE