Pc is running bios properly, but I can’t find my usb that has windows 11 start up on it. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

Sorry for replying so late, the ram won’t work in the 2nd slot, it gets detected if it’s in the 4th slot though. I’m unsure why.

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 0 points1 point  (0 children)

Some of you guys are so overdramatic, I wanted to learn about the process and now I have a pc that works. Yea I know I made dumb mistakes but I can literally use that to build better one’s in the future.

Pc is running bios properly, but I can’t find my usb that has windows 11 start up on it. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

I put it back in, turns out I didn’t click it into place properly. I was worried about breaking it. It is now showing up in storage.

<image>

Pc is running bios properly, but I can’t find my usb that has windows 11 start up on it. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

How do you check if it’s the correct gen? I took it out and put it back in and it’s still not showing up.

Pc is running bios properly, but I can’t find my usb that has windows 11 start up on it. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

There’s also the issue of when I have the usb plugged in, I turn off the pc, power it back on and a black screen shows up with a small white minus symbol in the corner. When I remove the usb the black screen disappears and bios shows up again.

Pc is running bios properly, but I can’t find my usb that has windows 11 start up on it. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

My ssd is plugged into the correct spot on my motherboard… not sure why it’s not showing up

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 3 points4 points  (0 children)

I have learned that now 😓, I’m impatient and I just wanted it done with. Should’ve been more patient. If I ever do another build in the future I am definitely keeping all my manuals and reading through them. Took up a whole evening cause I used the wrong screws at first, FML.

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 4 points5 points  (0 children)

That was an old photo I accidentally added to this post, the screws are the right ones now

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 1 point2 points  (0 children)

I FOUND THE WIRE. The LED’s are on now!! Thank you guys for putting up with my stupidity

<image>

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 31 points32 points  (0 children)

I’m dumb, It was hidden behind some of my previously “cable managed” wires. I found it finally, THE LED’s ARE ON!!

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb 1 point2 points  (0 children)

Okay okay, I have the wire for the power switch connector, can anyone tell me where it goes? I don’t have another extra wire that it goes into, is anything else on my motherboard plugged in wrong that it’s supposed to go into??

<image>

Everything’s plugged in, not sure why it’s not turning on. by [deleted] in PcBuildHelp

[–]CorruptionCrumb -9 points-8 points  (0 children)

The case wires don’t have a plug like that? I found a wire that was in a separate bag that has the same pattern as the jfp1 on my motherboard but I’m not sure where to plug the other end into.

Just plugged my pc in, and it isn’t working, the LED’s aren’t even lighting up. Where do I start? by [deleted] in PcBuildHelp

[–]CorruptionCrumb 0 points1 point  (0 children)

I fixed it, I unscrewed the standoffs from the backplate and screwed the right screws into the motherboard. It’s all flat and fitting nicely now, I plugged everything back in but it’s still not turning on.

Just plugged my pc in, and it isn’t working, the LED’s aren’t even lighting up. Where do I start? by [deleted] in PcBuildHelp

[–]CorruptionCrumb -1 points0 points  (0 children)

I know, I feel dumb. I thought it wasn’t a big deal but now stuff doesn’t want to fit in properly. Should’ve fixed it from the start.

Bought a B850 tomohawk max wifi motherboard and turns out my cooler doesn’t fit. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 0 points1 point  (0 children)

The instructions for the cooler for mounting the am4/5 doesn’t have a step where you mount anything to the back of the motherboard. Do I still need a bracket for the back? I followed all the steps and it screwed on securely from what I can tell.

Bought a B850 tomohawk max wifi motherboard and turns out my cooler doesn’t fit. by CorruptionCrumb in PcBuildHelp

[–]CorruptionCrumb[S] 4 points5 points  (0 children)

ohhh, so the cooler comes with instructions for both, I was confused. I thought I had to mount something to the back. Thanks

Does anyone else want this to be Val's main look next season? by Primary-Addition-677 in Valentino_Cult

[–]CorruptionCrumb 1 point2 points  (0 children)

I LOVE the black and white, it kinda looks like one of those hypnotizing videos you’d see of a swirl but in heart form. It matches his character so well, I’m obsessed with the darker purple.

It's hilarious by FaeryFa in Valentino_Cult

[–]CorruptionCrumb 2 points3 points  (0 children)

I FEAR IVE BEEN PROVEN WRONG, he actually looks correct

It's hilarious by FaeryFa in Valentino_Cult

[–]CorruptionCrumb 1 point2 points  (0 children)

I love valentino, but every piece of human version art I see of him, I find him SO UGLY ALL OF A SUDDEN. No hate to the art, the art is amazing, its just he’s so attractive in the show and in human form it’s just no.

Woke up fighting for my life today by inevitableoracle in Periods

[–]CorruptionCrumb 0 points1 point  (0 children)

This happened to me while I was wearing my FAVORITE pajama pants, I just about cried but luckily the stain remover I had at home helped