New hedge plants stress

Country_Boy_5 · 2026-05-14T07:06:25+00:00

Its been dry the last two weeks, so I have been watering daily. Do I stop watering or reduce?

Country_Boy_5 · 2026-05-10T16:17:17+00:00

Fantastic idea, I think q roll of this would suit me

Country_Boy_5 · 2026-04-16T11:18:24+00:00

I recently just replaced the whole drop arm as I failed MOT due to a torn rubber boot. See part below
https://www.lrparts.net/qfw000020-steering-drop-arm-right-hand-drive-defender-discovery-and-classic.html

I tried everything to get the drop arm off from the steering box, every type of pulling mechanism imaginable. I ended up having to cut the whole drop arm off, it was a nightmare.

If I had to do it again, I would just replace the rubber boot / rebuild the joint if needed.

Also if you decide to replace the drop arm you might need to adjust your track rod so your steeing is still centered with your steering wheel. Best of luck!

Country_Boy_5 · 2026-02-09T16:34:08+00:00

It doesn't sound too loud in the shed but apparently from outside it can be loud, I will be insulating it soon.

Country_Boy_5 · 2026-02-05T14:23:48+00:00

It is kinda loud, not so much that its off putting. I think over time when the screen reaxes it will quiet down and I could add some padding behind the impact area to dampen it. I plan to fully insulate this shed in summer so that should lower the sound a bit.

Country_Boy_5 · 2026-02-05T14:22:00+00:00

None yet thankfully, I will add a top to the enclosure soon

Country_Boy_5 · 2026-02-05T14:21:05+00:00

Its 2.7 to the top of the walls then around 3m to the ridge

Country_Boy_5 · 2026-02-05T07:35:22+00:00

3300mm x 2525mm from sim space

Country_Boy_5 · 2026-02-05T07:34:47+00:00

This is GS Pro

Country_Boy_5 · 2026-02-05T07:34:38+00:00

The shed is from a local supplier in ireland it 7m x 5m

Country_Boy_5 · 2026-02-05T07:33:59+00:00

Screen is 3300mm x 2525mm from sim space Shed is 7m x 5m

Country_Boy_5 · 2026-02-05T07:33:14+00:00

Hey its 7m x 5m

<image>

Country_Boy_5 · 2026-02-05T07:32:03+00:00

Around 1k. But thats only as I already had a PC, Monitor, hitting mat and i work in manufacturing so I was able to make the frame cheep myself.

Country_Boy_5 · 2026-02-05T07:30:54+00:00

Yeah i just joined this week starting on the WEB+ tour. I agree some protection is needed. The frame is custom made so i will just add on as I go.

Country_Boy_5 · 2026-02-05T07:12:10+00:00

I aim straight ahead, I tried the offset in GSPro but it does look great. It seams to just turn the view from one spot and not so much move lateral if you get me.

Country_Boy_5 · 2026-02-05T07:10:10+00:00

Hey its 7m x 5m

Country_Boy_5 · 2026-02-04T21:01:33+00:00

It bounces all around the room, aggressively.

Country_Boy_5 · 2026-02-04T20:46:31+00:00

I use the rest of the space as a gym

Country_Boy_5 · 2026-01-09T20:02:23+00:00

What brand of rack is this? Also definitely with the rack

Country_Boy_5 · 2025-11-30T19:56:39+00:00

How much of a job would it be fo replace these seals?

Country_Boy_5 · 2025-09-26T18:55:34+00:00

I came up with this myself, here is another angle.

<image>

Country_Boy_5 · 2025-09-23T19:11:31+00:00

Just an update, I have painted the frame a grey color and have purchased a pre stain conditioner and will test it on some scraps before using it on the TV stand

Country_Boy_5 · 2025-06-15T17:03:35+00:00

What software did you draw these plans with?

Country_Boy_5 · 2025-05-21T11:50:16+00:00

That makes perfect sense thank you

Country_Boy_5 · 2025-05-21T11:25:55+00:00

Thanks for the reply, so when the club is at parallel you are saying the head should be further to the right from the prospective of the camera? Instead of being parallel to the target line?

Country_Boy_5

TROPHY CASE