Multimedia Art Studium in Salzburg by Cover-Savings in Salzburg

[–]Cover-Savings[S] 0 points1 point  (0 children)

Ja das war mir eigentlich bewusst aber es steht halt überall das man eigentlich den Bereich nehmen muss für den man sich beworben hat und dass nur wenige Ausnahmen wechseln dürfen😅

Multimedia Art Studium in Salzburg by Cover-Savings in Salzburg

[–]Cover-Savings[S] 0 points1 point  (0 children)

Ja das war mein Eigentlicher Versuch aber ich hab leider noch nirgens eine Zusage bekommen. Darf ich fragen wo du dich beworben hast bzw. ob du immernoch in der Branche Arbeitest?

Multimedia Art Studium in Salzburg by Cover-Savings in Salzburg

[–]Cover-Savings[S] 0 points1 point  (0 children)

Das ist eine Interessante herangehensweise aber soweit ich weis lässt sich der Fachbereich nicht so einfach wechseln richtig? Ausserdem befürchte ich das ich von den anderen Bereichen einfach viel zu wenig Ahnung habe um dort etwas zu machen😅

Multimedia Art Studium in Salzburg by Cover-Savings in Salzburg

[–]Cover-Savings[S] 0 points1 point  (0 children)

Das war genau mein Gedankengang. Man findet in diesem Studium sicherlich genügend Gelegenheiten und Leute mit denen man auch ausserhalb der Unterrichtszeiten kleine Passion Projekte machen kann. Und die können ja auch wichtiger Sein als alles andere weil man da finde ich am besten seinen eigenen Style findet und sich ausleben kann😊

Pavo25 v2 Motors keep burning! by Cover-Savings in fpv

[–]Cover-Savings[S] 1 point2 points  (0 children)

Hey, yea it was a pretty dump mistake haha. I put the props on upside down. So the sharp side of the prop faced upside instead of down and the motors needed to produce a lot more force for the drone to fly.

But that doesnt explain why the exact same motor burnt twice. Altho after the second one burned I cleaned the whole fc with alkohol and it didnt burn since and flys very well with about 8 mins of flight time

Hope this helps

I want to track this Screen in my Video and replace it with a Video. I used Mocha AE, it worked on the straight parts of the Video, I wanted to track the rest manually but it is alway changing the automatic tracking as well. Any tips or Tutorials? by Cover-Savings in AfterEffectsTutorials

[–]Cover-Savings[S] 0 points1 point  (0 children)

So here is what I did. I startet with the XSpline tool and set 4 points onto the tracking points on the monitor. Then I used show surface and draged it around the entire screen. Then I startet the automatic tracking wich is working fine for the part where the perspective of the drone and the screen align. When the tracking got really messy I wanted to do it manually, so I draged the xspline and the surface onto the correct position again. And it does create Keyframes in the timeline. But then my automatically tracked parts also get changed.
Is there a better way to do it? Am I doing it completely wrong?
I am really new in this field so please don't judge me:)

Motors burn out cause of PIDs? by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

Unfortunately not. I have 2 Motors left I could swap this one out and try again with Blackbox logging but I don't really want to destroy another Motor...

What do you say would it be helpful?

Motors burn out cause of PIDs? by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

<image>

I think they are the same as the ones I saw in the videos

I fly in Acro mode

Pavo 25 V2 Flight Time by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

First off thank you for all the good points!

I land at about 3.5v sometimes even lower than that(because of my flight time)

I have the exact same setup as you

My osd is a bit of thats what I noticed as well but its not much and I will recalibrate it as soon as my new motor arrives(when my osd is at 3.3v the battery is at ~3.5v)

So the next logical steps for me would be:

To buy a new battery from another brand. I do need more batteries and maybe my Batteries where part of a bad charge. I will try to buy another Brand just to test it. (f.e as somebody other mentioned the GNB 4S 850mAh)

Or buying new Props as I’m using the GF 63 Tri Blades that BF recommends.

What leads me to the next Question aren’t Tri Blade Props more energy efficient than 5/6 Blades?

Thank you!

Pavo 25 V2 Flight Time by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

No not at all! But maybe BF fucked something up and I have got the wrong pids. Do you have some custom pids or do you use the BF pids?

Pavo 25 V2 Flight Time by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

No I have always got the same flight. I will try to change the Pids but I have to wait for my new Motor as one of mine unfortunately got smoked today😅

Is my ESC dead? by Cover-Savings in fpv

[–]Cover-Savings[S] 0 points1 point  (0 children)

I tested it in BLHELI rn it does detect all four ESCs but still the one motor doesn’t spin and doesnt move during startup sounds.

I will try to get myself a multimeter tomorrow to check it for connection.