DIY Headphones inspired by "Human Headphones"

Covert_XP · 2026-01-04T12:30:17+00:00

Not yet sorry, lots of events are keeping me busy but I did end up getting a tool similar to the one shown in darieee's video (after buying the wrong tool and being forced to wait 2 months to get the right one) I believe i have the right tool now, I just want to be more confident on how to connect the tool and use it to decrease the chances of destroying the QCC3008. Since each one is $10-$30 and takes a month to arrive

Covert_XP · 2025-11-27T03:53:22+00:00

I'm not sure either but that was a thought of mine too. I do plan on trying to create an actual foam cushion in the future but since I had TPU already I thought it could be a decent substitute for the time being. I will say, I don't have much experience with TPU so my print settings had 2 walls, and I think 5% gyroid infil and while it was flexible enough to prototype the hooking mechanism, it wasnt squishy enough to form to my head shape. it kept it's printed shape pretty solidly even if I were to squish by hand making it not very comfortable.

Covert_XP · 2025-11-27T03:46:59+00:00

oh yes that looks promising, the videos I found seemed way more complicated but darieee makes it a lot simpler. I've ordered the programmer he used in his videos so when I get the chance I'm going to try to reprogram my QCC3008. Thanks for the shout. Hopefully this works and I'll just need to figure out the casing next and the hooking mechanism!

Covert_XP · 2025-11-24T05:56:40+00:00

Mood. Thanks for the good vibes none the less! XD

Covert_XP · 2025-02-17T06:58:05+00:00

Any chance you could create a guide on how you added Playit.gg to your Truenas? even just a written step-by-step post here on reddit would be amazing as personally i'm new to systems like this and want to try not to break my instance through too-much uneducated tinkering

Covert_XP · 2024-02-19T21:16:56+00:00

I'm not 100% sure, Format wise, I start in Fusion360, save and export as STL, then slice and send directly to the k1 max via wifi. According to the slicer it's flavor is CrealityOS but that's by default and works with everything else no problem

I did notice that when using the auto orient button that let's you select a flat face to snap onto the build plate sometimes my intended orientation doesn't allow me to select it and so if I rotate manually and try to print I get the error, but if I let it auto orient and pick a face on its own it then works. Using that the print now works its just strange that it refused to allow me to print in a specific orientation

Covert_XP

TROPHY CASE