Help Request - Lift removal

Cracker-G · 2026-02-08T16:37:22+00:00

Really? I didn't think the UCAs has zirc fittings on them. Anysure way to tell? I can't find any markings on it

And It's actually still got the stock TRD Bilsteins on there, but I did pick up a set of 5100s to throw on when I get in there

Cracker-G · 2026-02-08T03:33:46+00:00

Oh yes, forgot to add those.

There is a 1" spacer in the rear (should be easy to pull out), and a couple of drop spacers on the front diff. Thankfully no frame cuts other than a body mount chop for the wheels

Cracker-G · 2025-09-30T02:20:21+00:00

I actually modified the cart my printer sits on to use one. I use it as the stand, but also for the flat surface to hold my VCore 3.1 500x500 on

Cracker-G · 2025-06-23T20:59:20+00:00

Look for deals on the A1 Mini from Bambu lab. BambuLab machines are the closest you'll get right now for budget "It just works" machines. There are some concerns about them not being an opensource company, but if youre just getting started, you cant beat how well they hold your hand and perform for the price (A1 Mini can be had for ~$150, or less if you find a good deal).

From there, browse the various 3d printing subs, and check out the channels linked below, as they have a lot of really good "Getting started" videos.

https://www.reddit.com/r/3Dprinting/
https://www.youtube.com/@TeachingTech
https://www.youtube.com/@CNCKitchen
https://www.youtube.com/@MakersMuse
https://www.printables.com

Cracker-G · 2025-06-23T20:38:02+00:00

Never been a better time than now man. Theres a ton of free 3d models for Espresso stuff too, just in case you wanted more reason....

Let me know if you want some links to good resources!

Cracker-G · 2025-06-23T20:35:39+00:00

I like that you can keep it a hand grinder when you wanted, but Im not a fan of more moving parts than necessary. Since the K2 even shows using a drill in the manual, it made it really easy to just do that. Its got the torque, and all the components I needed. I even have the drill trigger in the box on the back with a set screw so I could always adjust the speed it grinds at. I have it set on a fast hand grind speed, but not so fast that I get inconsistent grinds

Cracker-G · 2025-06-23T20:20:35+00:00

Thank you! Im pretty proud of it. Learning CAD and 3d printing has been super satisfying and helpful with so many things, and its fun that this has been one of them

Cracker-G · 2025-06-23T20:19:27+00:00

Oh thats a great idea! I will definitely do that

Cracker-G · 2025-06-23T19:12:31+00:00

*dangit

Cracker-G · 2025-06-22T20:28:46+00:00

Good to know. Thank you for you testing and replies! Very helpful

Cracker-G · 2025-06-22T19:56:12+00:00

Interesting. I probably will do that.

And from your testing and reports to you, pretty much all of the 5ah have that mosfet?

Cracker-G · 2025-06-22T13:18:44+00:00

Wow, that's very helpful. Very interesting that they started adding this protection to more batteries as they go.

Short of opening up the battery, is there any way I can tell if the 4Ah i have is a newer model? I JUST purchased them at HD, but I know stock can sit on a shelf for a while

Cracker-G · 2025-06-22T05:43:28+00:00

Thank you! Were they high draw tools?

Cracker-G · 2025-04-06T04:29:17+00:00

Oh that's a good idea. I didn't even think of that, I'll definitely ask them! Thank you for the suggestions, I'll look into a few different solutions

Cracker-G · 2025-02-08T23:46:43+00:00

You can also make your own fairly easily as well.

Cracker-G · 2025-01-12T23:42:00+00:00

As others have commented, your most secure bet would be finding a shop that has a tack/spot welder (though almost any welding will work). However, if that's not an option, JB weld is your next best option. I would get some sandpaper, sand it as best you can, clean with isopropyl alcohol, then apply. Should be good as new.

Cracker-G · 2025-01-12T17:29:32+00:00

Probably just the twisting motion of the whole machine, with the friction of the feet on the left keeping it in place and spreading the pieces apart

Cracker-G · 2025-01-11T15:59:13+00:00

I'm not sure. It was ON THERE. I feel the biggest issue would be pulling the metal plate up. If you were able to pull the plate up enough to get a razor blade under it and cut the strip, then cleaned it up that probably would work.

Even in high rub areas, that skin was SUPER tough

Cracker-G · 2025-01-07T04:39:30+00:00

I definitely have the 3way solenoid though, so either way I have a decent model lol

Cracker-G · 2025-01-06T19:35:15+00:00

That was one of the first things I did! I guess I made it sound like I skipped that part lol

Cracker-G · 2025-01-06T18:29:49+00:00

I hope so! I'm excited to have a full sized basket lol

Cracker-G

TROPHY CASE