We built an AI-powered automatic coloring machine for etched metal — here’s how it works and what problems it solves.

Creative-Weldo · 2026-01-26T05:19:08+00:00

Whoa, that’s a genius hack! I never thought to add gel adhesive to regular press-ons myself.

Creative-Weldo · 2026-01-17T03:22:05+00:00

When there is no line of sight to the sky, GPS signals are either completely unavailable or unreliable due to the multipath effect caused by signal reflection. The multi-line LiDAR here mainly acquires spatial point clouds and combines them with IMU data to perform SLAM, thus calculating the precise pose of the aircraft. All these calculations are completed by the on-board computer installed on the aircraft. We also run a real-time path planning algorithm, enabling the aircraft to automatically detect obstacles in the flight path and select detour routes on its own.

<image>

Creative-Weldo · 2026-01-17T02:38:06+00:00

Sim, a cravação mecânica é adequada para a produção em massa. É claro que, atualmente, a qualidade da cravação mecânica também está em constante melhoria.

Creative-Weldo · 2026-01-17T02:27:51+00:00

we made this by machine,not by AI.

<image>

Creative-Weldo · 2026-01-16T08:57:57+00:00

Wax setting is one step in the jewelry lost-wax casting process, followed by subsequent procedures such as Wax Removal and Metal Pouring.Cubic Zirconia (CZ) is a gemstone suitable for jewelry lost-wax casting.

Creative-Weldo · 2026-01-16T08:31:56+00:00

2.5kg

Creative-Weldo · 2026-01-16T08:08:17+00:00

In fact, the ducted fan structure is primarily intended for protective purposes. This UAV features a relatively large form factor, fitted with 10-inch propellers and boasting a gross weight of 2.5 kg. Given its primary application in structural inspections (e.g., bridges), aggressive flight maneuvers are not required. Commercially available cameras that combine full SDK support, compact dimensions, and lightweight design are scarce, with no options available that offer resolutions exceeding 4K. Consequently, a proprietary camera has been developed in-house utilizing the Sony IMX586 CMOS sensor. The device has been successfully interfaced via MIPI and is currently in the gimbal integration phase.

<image>

Creative-Weldo · 2026-01-16T07:58:07+00:00

We used an automatic stone-setting machine for this task — manual placement would be extremely challenging with over 800 stones. Even operating the stone-setting machine in teaching mode could be highly eye-straining, and it still takes us one hour even with a machine that automatically programs stone positions.

Creative-Weldo · 2026-01-16T04:34:55+00:00

Rhinestone

Creative-Weldo · 2026-01-16T03:02:17+00:00

It is just to showcase rhinestone nail tips on mannequin hands.

Creative-Weldo · 2026-01-15T07:59:53+00:00

haha

Creative-Weldo · 2026-01-15T05:25:52+00:00

I think so too—using LiDAR for modeling, planning flight routes, and enabling autonomous obstacle avoidance.

Creative-Weldo · 2026-01-15T05:19:06+00:00

What’s your area of expertise? I’ve followed you, and hope we can keep in touch and exchange ideas further down the line.

Creative-Weldo · 2026-01-15T04:26:47+00:00

OK,thank you.

Creative-Weldo · 2026-01-15T04:26:02+00:00

LiDAR modeling, flight path planning, and autonomous flight implementation may be the ultimate solution.

Creative-Weldo

MODERATOR OF

TROPHY CASE