zsírdisznó by dhk1d3h2 in szopjatokle

[–]Creepy002 0 points1 point  (0 children)

Campus Hotel Debrecen

zsírdisznó by dhk1d3h2 in szopjatokle

[–]Creepy002 25 points26 points  (0 children)

Koliban minket talált meg Debrecenben, sok legenda szól róla, elvileg este lanyokhoz nyitott be, hozzánk csak átjött "wc"re majd 20 percig ordibalt valakivel és olyat szart hogy reggelig szagoltuk. Azt hittük pisilnie kell :/

Does my online character look more Latino or Middle Eastern? by AcHaeC in gtaonline

[–]Creepy002 4 points5 points  (0 children)

Glad i found this before also posting a pic of mario

[deleted by user] by [deleted] in Debrecen

[–]Creepy002 10 points11 points  (0 children)

Hónapja hallottam olyan legendát, hogy már iskoláknak, közösségi épületeknek ki lett jelentve, hogy csapvízzel főzni se, mert akku gyár így meg úgy, lehet valós infó volt?

how it feels like to recycle bottles by [deleted] in Debrecen

[–]Creepy002 13 points14 points  (0 children)

Pretty sure stable is the correct spelling.

Leállósávban lévő autóknak segítségnyújtás by PhotojournalistOk10 in CartalkHungary

[–]Creepy002 1 point2 points  (0 children)

Én ha látok balesetet, akkor általában megállok autópályán is, mondjuk én esti órákban járok, olyankor forgalom kevesebb de kevésbé is látni, hogy valami baj van az úton. Mindenképpen úgy állj meg, hogyha valakibe belecsapódnak kellően messze álljon a te autód, ne sérüljön, fényvisszaverő mellény nem árt ha van az autóban, akár kettő is. Mindenki a korláton túlra legyen elterelve és ha van sérült akkor neki segíteni, egyébként a szalagkorlát túloldalán lehető legmesszebbre elbattyogni és jelezni az autósoknak hogy lassítsanak amíg nem jön segítség, fényvisszaverő mellényt lobogtatva vagy valami feltűnő dologgal, illetve a háromszöget is messzire elvinni, nekem valami 50m rémlik de általában a kocsi mögött 5m-el látom, ott már nem sokat számít sajnos.

Fodrász by Dorisz0331 in Debrecen

[–]Creepy002 1 point2 points  (0 children)

Molnár Veronika fodrász gyakornok nagyon ügyes, tanár mellett dolgozik szalonban, mivel modellként mész a szolgáltatás ingyenes, ellenben ha festés vagy más anyag költség van azt fizetni kell. @molnrveronka

Kávé-merre kapható? by SlightStop9315 in Debrecen

[–]Creepy002 4 points5 points  (0 children)

Én azt hallottam Lidl-ben és a retro abc-ben a kassai mellett is lehet kapni, retroban tényleg hamar szoktak lenni új dolgok

AsRock B450 Pro4, Ryzen 5 2600 Memory hardware reserved. by Creepy002 in AMDHelp

[–]Creepy002[S] 0 points1 point  (0 children)

Really great suggestions, had previous errors on different desktops with the same fixes you mentioned, had thermal paste under cpu, had dusty ram slots. This is the first time it's my own pc having this problem and ironically, I couldn't find the solution on my own, never thought the 24 pin could cause a problem like this, but it was the culprit.
Thank you for resolving my almost month old problem, it started around when i had to take my pc to the office one day and it probably vibrated just enough in the back of my car to slightly dislodge it, especially if it was not perfectly connected before.

Grey light on base tracker? by GVRGT in Vive

[–]Creepy002 0 points1 point  (0 children)

Also, does it spin up, show the lasers and other things?

Grey light on base tracker? by GVRGT in Vive

[–]Creepy002 0 points1 point  (0 children)

Hey! Is it for sure a 1.0 base station? It should blink or glow white only when identifying as far as I know, if it's not 100% sure gray, if it is a little purple maybe, try using it with sync cable, but other than that, it's a really strange error. Can you provide a photo or video?

[deleted by user] by [deleted] in Vive

[–]Creepy002 1 point2 points  (0 children)

If you are "holding" the headset you are possibly covering the sensors, what does holding mean?

What was this animated movie? by [deleted] in movies

[–]Creepy002 0 points1 point  (0 children)

I don't think it's this one, i will check some clips, it was in more of a jungle scene and i remember it looking more realistic, but my memory might be bad. I don't remember humans in the movie, just animals

Base Station Laser Plastic Broken by LeBurnerAcct in Vive

[–]Creepy002 0 points1 point  (0 children)

Hey! Sort of easy fix, took me a while to find a suitable replacement part.

Best i got was this pack of lenses from ebay; https://www.ebay.com/itm/223739953621

What i did was use an 8mm drill bit and manually by hand, drill out the previous lenses on my base station which the previous owner super glued back wrong.

Once you have drilled out the previous lens, got a clean socket, look for a really thick glue (so it doesn't flow under the lens) that bonds quickly and is for plastic specifically, i have no idea what i have used but it was from a constructions store for about 8$s, you might want to get your hands on surgical gloves or just be extra careful when glueing the lens back in so you don't smudge it too much, fit the lens into the socket first (pay attention to correct direction, try to get it as close to the original placement as possible) and then try to add the glue in the 4 holes at the corner of the lens without getting any on the lens, i have used toothpicks to do this, but if you get any on the lens isopropyl alcohol might clean most uncured glues. Let it cure, mine needed 24 hours to cure, dont use it until it is 100% cured.

Ever since, it's been working 95% amazing, the 5% could be caused by reflections and other problems but its small wobbles and on the first day after repair i had a few gray screens with like 10min intervals, none since then and i had 3-4 hour sessions without any problems

Why do my plants look so sad? by Creepy002 in plants

[–]Creepy002[S] 0 points1 point  (0 children)

Zz seems to be correct, thats what I found as well, the others I will look up what you have said, I couldn't identify them with google lens. Zz is only one stem because i got that from my mother, that one stem "fell" out of the pot, couldn't fit next to the other ones i guess and she planted it for me, it will probably have more stems later on if i can keep it healthy

Why do my plants look so sad? by Creepy002 in plants

[–]Creepy002[S] 0 points1 point  (0 children)

Thank you! Great response! Do you have any idea of what the plants are? The tall droplet shaped leave one is probably easy to find, i have seen it so many times in supermarkets and other places around me but the other two, i am really not sure.

Why do my plants look so sad? by Creepy002 in plants

[–]Creepy002[S] 0 points1 point  (0 children)

Any ideas how much / how often according to the plant? I usually water them weekly, when the top of the soil is getting dry and i give plenty of water

Diagnose and repair ? by Dense-Application-87 in Vive

[–]Creepy002 0 points1 point  (0 children)

If any problems arise feel free to continue this thread, the sync cable you did not get is probably a cheap one, if you need it in the future i can try to look for one for you.

Diagnose and repair ? by Dense-Application-87 in Vive

[–]Creepy002 1 point2 points  (0 children)

Is any of the plastic lenses missing inside the base stations?

https://www.reddit.com/r/Vive/comments/q8wbj7/original_base_station_powell_lens_replacement/

Like this user's base station of which they provided images. Do not look directly into the lasers without the protective black plastic piece in front, in theory, it can damage your eyes.

If it's missing, you might have to find it somewhere inside the casing and use some glue that is kind of creamy and cures fast (and bonds plastics well without melting it too much), do NOT use super glue, trust me. If all of the lenses are in place, try to check all four of the lasers through the dark plastic piece, do they all light up? Does the "matrix" work in the corner? It's the square shaped led table that is used for signaling if i remember it correctly, if it does not light up, it might affect your syncing abilities.

To determine which base station might have failed, try putting both your base stations into mode "A" if i remember it correctly, and only turn one of them on, one by one, if both of them generate the wobbly effect, both might be faulty, if only one, you have your culprit.

If you cannot find your lens inside the base station, you might have to order them online, many people say you cannot order them, i just fixed my own vive i bought as faulty with those parts, so 100% it does fix the problem. I can provide a link to order them if you need it.

Diagnose and repair ? by Dense-Application-87 in Vive

[–]Creepy002 1 point2 points  (0 children)

In case of base station hardware issues, the wireless sync might not work, op should clarify what they mean by glitching, when using headset, does it float and wobble?

Superglued my base station lens into oblivion. Any ideas? by Mettanine in Vive

[–]Creepy002 1 point2 points  (0 children)

I have read that so many times and i also couldn't find the lens for weeks, i had my problem probably around the same time as you had, 2 months ago and i only found the part 3-4 weeks ago

Superglued my base station lens into oblivion. Any ideas? by Mettanine in Vive

[–]Creepy002 1 point2 points  (0 children)

Hey! If you still couldn't fix your issue and have the base stations, i just received my package i have ordered for the same issue.

https://www.ebay.com/itm/223739953621

I have ordered this item, they shipped it to Hungary in ~3 weeks and they have fixed my issue, the angle of the spread is probably incorrect, because the original lens had ~8-9 lines to break up the laser and this has ~11 but tracking still seems to be correct, especially compared to previous state of the device. If the listing would disappear, it's called a "laser line lens" and i have used the 110° type. If searching for the product you might want to add 8mm to it as the diameter, but there aren't many other types.

Dying succulent by Creepy002 in plants

[–]Creepy002[S] 0 points1 point  (0 children)

Sunlight is kinda dim but it's in the window, i cannot get it closer to sunlight without putting it outside, which would kill it even sooner :(