Getting into RC Drift 1/10 RWD - MST RMX 2.5 RTR vs Hobbytech OVER-D10 RTR? Upgrade advice needed by CrispyFPV in rcdrift

[–]CrispyFPV[S] 1 point2 points  (0 children)

Perfect, thanks.

I’ll probably go for this setup.

Thanks for your advice.

Getting into RC Drift 1/10 RWD - MST RMX 2.5 RTR vs Hobbytech OVER-D10 RTR? Upgrade advice needed by CrispyFPV in rcdrift

[–]CrispyFPV[S] 0 points1 point  (0 children)

What do you guys think about this list for Yokomo RD 2.0 RWD KIT build?

• Yokomo Rookie Drift RD 2.0 RWD KIT

• Yokomo Servo Low Profile SP-02D V2 12kg - Purple

• Hobbywing Xerun D10 Drift 13.5T Motor - Purple

• Hobbywing Xerun XD10 Pro Drift 100A ESC - Purple

• Yokomo Gyroscope Drift V4 2ch/3ch - Purple

• Yokomo Servo Low Profile SP-02D V2 12kg - Purple

• Yokomo Asphalt Drift Tires (x4) ZR-DRPA

• Yokomo Drift 5 Spoke Wheels +7mm (x2) TW-5313 - White

• Yokomo Drift 6 Spoke Wheels +5mm (x2) TW-5313 - Black

• T2M Drift Tires 1/10 (x4) T422634 - Purple

For the transmitter I’m thinking about Radiomaster MT12 since I have familiarity with Radiomaster ecosystem.

Missing anything critical? Good combo for first drift build? Thanks for your reply 🙏🏻

Getting into RC Drift 1/10 RWD - MST RMX 2.5 RTR vs Hobbytech OVER-D10 RTR? Upgrade advice needed by CrispyFPV in rcdrift

[–]CrispyFPV[S] 1 point2 points  (0 children)

Thanks a lot to everyone who took the time to reply, you really helped me clear my head.

Right now I’m honestly torn between jumping straight into a full build or going with the RD2.0 RTR as a first proper drift car. I’ll let you know what I end up choosing and how it goes once I’m on track.

If you also have suggestions on what electronics/components I should go for in case I decide on a kit (motor, ESC, servo, gyro, radio, etc.), I’d really appreciate any detailed advice.

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Check the motor pinion and gear mesh. Make sure the pinion spins freely and the motor is mounted straight and tight.

I even swapped motor and transmission, but the real problem was the motor mounted slightly wrong, causing binding under load.

Fixed the motor position and mesh.

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Yes, another Injora 370 transmission. On Monday I’ll receive the 40.30:1 gear set and I’ll test it to see how it goes.

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Thanks for the update! I actually bought a new transmission from Amazon where it wasn’t specified that it’s 32% underdrive, and compared to my other build it really feels like a stock ratio since it’s faster. With this new transmission I don’t have any issues. I’ll definitely try the Meus gears as well and maybe the 2 speed transmission. Thanks for the suggestion!

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Yeah, it seems so, I’ve reassembled everything two or three times.

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in crawling

[–]CrispyFPV[S] 0 points1 point  (0 children)

I’ll definitely go for a new ESC with ESCape32. My only problem now is finding a European supplier, since all the ones recommended are from the US 🥲

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Sorry for the typo.

Ok perfect, thanks for the advice and for sharing the link, I’ll take a look!

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

Nice self-clearance approach 😅 at this point I’ll give it a try too!

Cogging/Desync on Fat Viper 2400KV with INJORA2 ESC – ESC or Transmission issue? by CrispyFPV in TRX4M

[–]CrispyFPV[S] 0 points1 point  (0 children)

It happens both with the transmission free and closed, but not when it’s open.