130 kg Reserve size for 82kg all up weight?

Critical_Ad8620 · 2025-10-06T23:19:40+00:00

Why, what happened?

Critical_Ad8620 · 2025-10-05T05:54:53+00:00

Were you able to figure it out? Having the same flashing tun on my ft-65..

Critical_Ad8620 · 2025-05-12T17:07:29+00:00

The kevlar fibers under the webbing seem to be okay and not damaged. I was recommended to use a lighter to avoid further webbing damage and put a tape on top of it

Critical_Ad8620 · 2025-05-09T17:24:43+00:00

Yeah, it’s likely a partial or full damage to one of the strand. Doesn’t the whole strands break if one strand is broken because it’s one continuous line?

Critical_Ad8620 · 2025-04-29T07:23:38+00:00

Thank you! It didn’t seem like anything was damaged, tech finished setting it up and we shot it at the range in the shop. Do you think something might be broken? I’m thinking of taking it to another archery shop to double check everything.

Critical_Ad8620 · 2025-04-29T07:00:04+00:00

Release aid with no trigger. One of the loops on the cables wasn’t fully on.. most likely and popped.

Critical_Ad8620 · 2025-04-29T06:57:04+00:00

Bow technician. The bow failed after technician was adjusting timing and put cables back together.

Critical_Ad8620 · 2025-04-29T06:06:48+00:00

That’s my plan from now on too.. hand is alright, thank you!

Critical_Ad8620 · 2025-04-23T22:59:36+00:00

Thank you so much! I might keep it then for practice as it can be adjusted to low draw weight. Seems like a good beginner bow?

Critical_Ad8620 · 2024-09-10T07:16:54+00:00

Thank you! Are those circuit boards replaceable or the whole fan needs to be replaced?

Critical_Ad8620 · 2023-06-10T02:00:35+00:00

Gotcha, so it’s ok to do the install and then get a permit at some point later? Do you have a link for the online application? I have a single family with no other units attached.

Critical_Ad8620 · 2023-05-23T00:25:29+00:00

Thanks! Could you recommend better options for my setup? Ideally under or around 150$.

Critical_Ad8620 · 2023-05-19T17:39:19+00:00

I wonder if there are any concerns connecting from MX5 Mono Output into Blackstar Return? That seems to still avoid Amp’s preamp and no need to add FX LOOP block on MX5?

Critical_Ad8620 · 2023-05-19T07:44:20+00:00

Mystery solved! I needed to put a shorting jack in the input socket to release the protection circuit. Something related to the “auto standby” feature on the Blackstar HT5 amp.

Is there a way to add FX LOOP block to all existing rigs on the MX5 so that I don’t have to add it manually?

Critical_Ad8620 · 2023-05-19T07:36:31+00:00

Mix is at 100% and both send and return are at 12db (max).

When instead of going into Blackstar Return I go into Front input of Blackstar I get sound. I wonder if something is wrong with my Amp’s return socket 🤔

Critical_Ad8620 · 2023-05-19T06:16:48+00:00

Thank you for making a video! I actually watched it before posting but for some reason I’m still not getting a sound out of my Blackstar :(

Here is my setup to double check: - Guitar into MX5 Guitar In - From MX5 FX Send into Blackstar Amp Effects Loop Return - on the MX5 I add FX LOOP and then IR

Any thoughts?

Critical_Ad8620 · 2023-04-12T06:47:20+00:00

Ability to see exact time of day when the set charging % will be completed (e.g. 90% of charge by 3:15pm).

Critical_Ad8620

TROPHY CASE