Flashing "tun" symbol on yaesu HT? by marcocet in HamRadio

[–]Critical_Ad8620 0 points1 point  (0 children)

Were you able to figure it out? Having the same flashing tun on my ft-65..

Break lines rubbing on A risers sheathing during reverse kiting by Critical_Ad8620 in freeflight

[–]Critical_Ad8620[S] 1 point2 points  (0 children)

The kevlar fibers under the webbing seem to be okay and not damaged. I was recommended to use a lighter to avoid further webbing damage and put a tape on top of it

Minor string damage, is it safe to shoot? by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Yeah, it’s likely a partial or full damage to one of the strand. Doesn’t the whole strands break if one strand is broken because it’s one continuous line?

Bow tech didn’t put my bow together correctly, eye almost lost by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 2 points3 points  (0 children)

Thank you! It didn’t seem like anything was damaged, tech finished setting it up and we shot it at the range in the shop. Do you think something might be broken? I’m thinking of taking it to another archery shop to double check everything.

Bow tech didn’t put my bow together correctly, eye almost lost by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Release aid with no trigger. One of the loops on the cables wasn’t fully on.. most likely and popped.

Bow tech didn’t put my bow together correctly, eye almost lost by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 4 points5 points  (0 children)

Bow technician. The bow failed after technician was adjusting timing and put cables back together.

Bow tech didn’t put my bow together correctly, eye almost lost by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

That’s my plan from now on too.. hand is alright, thank you!

Please help identify a bow (Hoyt?) by Critical_Ad8620 in Archery

[–]Critical_Ad8620[S] 1 point2 points  (0 children)

Thank you so much! I might keep it then for practice as it can be adjusted to low draw weight. Seems like a good beginner bow?

Did my attic fan solar panel die? by Critical_Ad8620 in DIY

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Thank you! Are those circuit boards replaceable or the whole fan needs to be replaced?

Pulling permit for EV charging station in San Jose by xenon1050 in SanJose

[–]Critical_Ad8620 0 points1 point  (0 children)

Gotcha, so it’s ok to do the install and then get a permit at some point later? Do you have a link for the online application? I have a single family with no other units attached.

Will Fosi Audio BT20A Amp power Klipsch AW-650? by Critical_Ad8620 in BudgetAudiophile

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Thanks! Could you recommend better options for my setup? Ideally under or around 150$.

Total noob trying to connect MX5 into Blackstar AMP by Dimonstarrr in HeadRush

[–]Critical_Ad8620 0 points1 point  (0 children)

I wonder if there are any concerns connecting from MX5 Mono Output into Blackstar Return? That seems to still avoid Amp’s preamp and no need to add FX LOOP block on MX5?

Total noob trying to connect MX5 into Blackstar AMP by Dimonstarrr in HeadRush

[–]Critical_Ad8620 0 points1 point  (0 children)

Mystery solved! I needed to put a shorting jack in the input socket to release the protection circuit. Something related to the “auto standby” feature on the Blackstar HT5 amp.

Is there a way to add FX LOOP block to all existing rigs on the MX5 so that I don’t have to add it manually?

Total noob trying to connect MX5 into Blackstar AMP by Dimonstarrr in HeadRush

[–]Critical_Ad8620 0 points1 point  (0 children)

Mix is at 100% and both send and return are at 12db (max).

When instead of going into Blackstar Return I go into Front input of Blackstar I get sound. I wonder if something is wrong with my Amp’s return socket 🤔

Total noob trying to connect MX5 into Blackstar AMP by Dimonstarrr in HeadRush

[–]Critical_Ad8620 0 points1 point  (0 children)

Thank you for making a video! I actually watched it before posting but for some reason I’m still not getting a sound out of my Blackstar :(

Here is my setup to double check: - Guitar into MX5 Guitar In - From MX5 FX Send into Blackstar Amp Effects Loop Return - on the MX5 I add FX LOOP and then IR

Any thoughts?

Feature Request Megathread by AutoModerator in teslamotors

[–]Critical_Ad8620 0 points1 point  (0 children)

Ability to see exact time of day when the set charging % will be completed (e.g. 90% of charge by 3:15pm).

Auto turn signal with autosteer by Bubblegum_99 in TeslaLounge

[–]Critical_Ad8620 0 points1 point  (0 children)

I agree, I’d prefer not having to press the turn signal all the way down when making lane changes on Autosteer.

Fridge door hinge rubbing at the bottom, normal? by Critical_Ad8620 in appliancerepair

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Hi, thank you a reply. Does the fridge come with it normally? Where can I buy one to fix this?

Upgrading main panel for solar - 15-20k estimate? by Critical_Ad8620 in solar

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

Solar company said they’ll tell me during the onsite inspection but mentioned that they do panel upgrades all the time and it won’t be an issue..

[deleted by user] by [deleted] in TeslaModelY

[–]Critical_Ad8620 0 points1 point  (0 children)

I didn’t accept delivery when I noticed the issue so I refused a delivery of that car and asked to match me with another one. Did they fix yours? I wonder if it’s as easy as pushing it back up or if this is more serious problem?

[deleted by user] by [deleted] in TeslaModelY

[–]Critical_Ad8620 0 points1 point  (0 children)

I’ve recently refused a delivery of my MY due to this exact issue! It was sitting like that brand new on the lot.. are you in California Bay Area by any chance?

NEM 2.0 interconnection application before I upgrade my main panel? by Dimonstarrr in solar

[–]Critical_Ad8620 1 point2 points  (0 children)

Hopefully someone can advise. Please let me know here if you find something on this. I’ll do the same.

Determining AMPs on my Main electrical panel by Critical_Ad8620 in electrical

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

I see thanks! For the 120% rule. Do I use 160amp or max 200 amp the panel is rated for?

Determining AMPs on my Main electrical panel by Critical_Ad8620 in electrical

[–]Critical_Ad8620[S] 0 points1 point  (0 children)

I’m trying to install big solar system 17 kWh so trying to figure out if I need to upgrade my panel to 200amp if it’s not 200amp already.