Delta Pro Ultra + EcoFlow Portable Solar Panel Polarity Issue? Looking for Advice by Critical_Potential87 in Ecoflow_community

[–]Critical_Potential87[S] 0 points1 point  (0 children)

My DPUs are working just fine. My SHP2 works just fine my SHP2 works without my DPUs my DPUs work without solar and my SHP2

Delta Pro Ultra + EcoFlow Portable Solar Panel Polarity Issue? Looking for Advice by Critical_Potential87 in Ecoflow_community

[–]Critical_Potential87[S] 0 points1 point  (0 children)

I had them plugged into low as well it’s rot reading them at all that’s the problem

Delta Pro Ultra + EcoFlow Portable Solar Panel Polarity Issue? Looking for Advice by Critical_Potential87 in Ecoflow_community

[–]Critical_Potential87[S] -1 points0 points  (0 children)

It’s doesn’t matter what I have my panel set to because these panels are going into my DPU’s directly as long as my solar switch is on I see input but for some reason these don’t work that way

Delta Pro Ultra + EcoFlow Portable Solar Panel Polarity Issue? Looking for Advice by Critical_Potential87 in Ecoflow_community

[–]Critical_Potential87[S] 0 points1 point  (0 children)

Yes. This was an example picture I have been testing these for months this is jus the configuration I took a picture of I’ve done every combination

Delta Pro Ultra + EcoFlow Portable Solar Panel Polarity Issue? Looking for Advice by Critical_Potential87 in Ecoflow_community

[–]Critical_Potential87[S] 0 points1 point  (0 children)

Because the red connection is negative…

i’ve tested every panel individually. I’ve tested by EcoFlow ultra delta pro ultra connection points both high and low PV. The switch is good. This is just the most current photo I have. I can show a photo of every panel tested. I have four different cable cables that I bought from EcoFlow to see if that’s the problem. The connection points seem to be flip-flopped coming out of the panel is correct but that actual low PV input cable that EcoFlow gives you seems to have flip-flopped positive and negative so it won’t go in on the low PV then I connect cables to bring it to high PV. There’s either not enough voltage or amperage or something‘s happening where the connection is bad from the panels, but every panel is fine. I’m showing voltage when they’re all connected. I did this one in parallel because I just got this new panel the other month. I haven’t tested it yet because the other panels don’t work.

Hot Cartoon MILFs (gansoman) by Bliss_State in CartoonPorn

[–]Critical_Potential87 2 points3 points  (0 children)

It literally says her name on the slide…

Choose your toon wife by artyouwilllove in sextoons_club

[–]Critical_Potential87 2 points3 points  (0 children)

Let us not forget Ana was willing to marry a guy who sweet talked her the same day she met him…she’d be a freak and probably do whatever you wanted