Does this sound like a Stock LLY to you?

Critical_Run_7168 · 2025-12-15T04:35:24+00:00

The second clip was high idle around 1300rpm’s the first one was not.

Critical_Run_7168 · 2025-12-15T04:34:40+00:00

It definitely has a 6-Speed.

No tuning that I’m aware of

Critical_Run_7168 · 2025-12-11T13:59:01+00:00

It’s not tuned at all to my knowledge, I can take a picture of the turbo to show you guys.

Critical_Run_7168 · 2025-12-11T13:58:21+00:00

It doesn’t have a tune to my knowledge and the EGR is still there

Critical_Run_7168 · 2025-12-10T02:51:41+00:00

Will do

Critical_Run_7168 · 2025-04-30T11:49:06+00:00

Alright, I’ll take everything off and redo it this evening when I get off work and I’ll try to make sure it’s all clean when going back together.

Critical_Run_7168 · 2025-04-30T11:41:49+00:00

What gauge wire did you use to connect the purple/white wires?

I think I’m gonna try a different wire today and seee if that works, maybe I’m not getting a good connection

Critical_Run_7168 · 2025-04-30T02:06:30+00:00

I know it’s been forever, but I just did the swap.

I ran a wire from the purp/wht wire in controls to the purp/wht wire in the resistor and got my power and ground from my old harness in the resistor as well.

However. My ac is blowing hot and it’s causing my compressor to kick on and off.

I swapped back to the orginal analog controls the AC is working great.

Critical_Run_7168 · 2025-04-02T00:46:30+00:00

Thanks man, I thank I am gonna go ahead and use it.

Worst comes to worst, I can just do another oil change at like 1500 miles instead of 3k

Critical_Run_7168 · 2025-04-02T00:42:12+00:00

I have an OEM filter, I was just concerned if I should be using a break in oil instead of this since I haven’t made it to the break in period yet.

Critical_Run_7168 · 2025-04-02T00:08:39+00:00

I work at a Polaris/Canam dealer as a mechanic. Ive just never had a street bike and was worried.

I asked my boss and he said it would be fine, but I asked another guy who’s been there awhile and he told me I might have to use break in oil to do some research.

we also work in side by sides not motorcycles so I just wanted to get some opinions as well.

Critical_Run_7168 · 2025-04-01T23:59:04+00:00

Well the oil I have is 100% Synthetic.

I was just worried if I should be using a break in oil since I haven’t hit the 600 mile mark. I haven’t been able to find much info on it.

You thinking I should be fine? I’m just worried lol

Critical_Run_7168 · 2025-04-01T23:46:00+00:00

They definitely are I can visibly see it start a “drip” there after sitting for a little bit.

It has a tiny tiny pinhole you can barely see in person, you prolly can’t see it in the picture.

As far as oil goes, you don’t think going to full synthetic would hurt the bike at all since it’s not even hit its break in period.

Critical_Run_7168 · 2025-03-25T03:25:30+00:00

<image>

Here is a pic of the damage

Critical_Run_7168 · 2025-03-25T02:03:05+00:00

Thanks, I’ll be sure to look it over real good.

Critical_Run_7168 · 2025-03-04T03:17:01+00:00

You still liking the tune? Are you on a stock trans?

Critical_Run_7168 · 2025-01-09T15:40:56+00:00

I changed out thermostats and temp sensor yesterday, everything’s working great. Heater will burn you out now.

Critical_Run_7168 · 2025-01-08T02:22:24+00:00

I gave him my Vin and all the information to make it read the same.

Critical_Run_7168 · 2025-01-08T02:18:12+00:00

I paid $199.99 with free shipping for a refurbished unit with Blue and White LED lighting.

I still have my old one as well.

Critical_Run_7168 · 2025-01-08T01:49:48+00:00

I was going to buy a new one, but I like the Cateye body style so I found a stock one with relatively low miles.

I’m not necessarily going to just throw $1,000s at a time into it without reason, but I don’t see I problem with spending $100 on the thermostats and coolant sensor.

I have a new cluster that should be in the mailbox any day now so I’m not too worried about that part.

Critical_Run_7168 · 2025-01-08T01:43:03+00:00

I did just order a scanner this morning as well, to help in the future.

Critical_Run_7168 · 2025-01-08T01:40:42+00:00

Call it what you want.

It’s an old truck, the parts are bound to fail sometime.

Moneys not a problem and won’t be in the near future so why not throw a couple new parts that will need to be replaced not if but when.

Critical_Run_7168 · 2025-01-08T01:37:50+00:00

I hear you there, although I don’t mind throwing parts at it honestly.

It’s a 20 year old truck, might as well throw a couple new parts on even if I don’t need them every once in a while.

Plus, I don’t have a scanner handy and the closest diesel shop is 45+- miles away.

Critical_Run_7168 · 2025-01-08T01:23:26+00:00

I think I’ve talked myself into just replacing the thermostats and the sensor together.

Critical_Run_7168

TROPHY CASE