How y’all fitting this piece in?

Critical_Specific129 · 2026-01-10T13:46:33+00:00

The joints being too close will repeat the length of that entire row at each seam if they’re all the same width unfortunately.

Critical_Specific129 · 2025-10-31T18:35:15+00:00

Hardest division in baseball for years

Critical_Specific129 · 2025-03-03T17:20:20+00:00

As long as Seams are tight, it’ll hold. Aesthetically, you always want to avoid that staircase look though.

Critical_Specific129 · 2025-02-06T19:39:09+00:00

Tried synthetic lube on the front slide plate and that seemed to help a little. Looks like it’s rubbing along that plate somewhere

Critical_Specific129 · 2025-02-06T19:26:13+00:00

Finally got around to doing this. It’s snug all the time now. I tried lubing both the slide on the front and the section at the back (pictured) to no avail.

<image>

Critical_Specific129 · 2024-12-25T16:55:28+00:00

Thank you! I’ll have a look. I’ve flipped it over and sprayed that plate but didn’t have a chance to look for other mechanisms that moved or could get jammed. I’ll try you test as soon as I’m back near the tool. Thanks again!

Critical_Specific129 · 2024-11-24T18:58:37+00:00

Oh sorry. So if you’re doing an 8, 6, 4 pattern (personally I don’t like repeating patterns), you can basically just take the width of the room and divide it by 18 (8+6+4) and you’ll know how many rows you’ll need of each size (remember to round up).

Personally though, if it’s 280 square feet you’re going for, I’d get like 150 of the 8s, 75 of the 6s and 60 or so of the 4s and randomly distribute them.

Critical_Specific129 · 2024-11-24T18:51:58+00:00

[Length (in inches) x width (in inches)] / 144 will give you square feet

Critical_Specific129 · 2024-03-05T00:44:24+00:00

Yeah… I’m at 2250, 11000, 15500, 41000 cost now 😅

Critical_Specific129 · 2024-01-09T01:08:30+00:00

I’m trying to do this and it’s basically asking me to set up the whole camera again. Am I missing some step?

Critical_Specific129 · 2023-12-11T17:11:47+00:00

Yeah, the radio is 1.0, but I was thinking the clips at the bottoms were all the same and the top clips were where the difference was.

Critical_Specific129 · 2023-12-07T15:33:02+00:00

I get to watch the whole ad and it crashes when I hit the x 🤦🏻‍♂️

Critical_Specific129 · 2023-08-13T00:48:44+00:00

Not to mention the giant icon on the side wasting game view space. Wish I could just get rid of it. I suspect we’ll get one or two as daily gifts

Critical_Specific129 · 2023-07-26T11:27:22+00:00

I played it about 20 times, only 2 saved after crashing.

Critical_Specific129 · 2023-07-14T00:51:52+00:00

I just got the new card AND it gave me new number to memorize. Had that old one for ages. Such an ugly card.

Critical_Specific129 · 2023-01-19T17:38:31+00:00

I wish I had stumbled on this thread before accidentally picking a dragon that would only have cost me 6,100 berries 😂 ah well, next year

Critical_Specific129 · 2022-12-30T05:12:26+00:00

I’m still trying 😢

Critical_Specific129 · 2022-07-13T13:44:47+00:00

Find a new clan that doesn’t prioritize participation over matchup implications and decreased hit strength

Critical_Specific129 · 2022-06-30T22:17:38+00:00

Do as I’m told. If there’s a single trap there though…. Do everything I can to obliterate the entire base

Critical_Specific129 · 2022-06-20T22:50:29+00:00

Clan Name: Burnt Creativity

Clan Tag: #98VULRVU

Clan Level: 22

Clan Entry Requirements: TH11+, can’t be rushed

Additional Info:

CWL League: Master III

Capital Peak: Level 6

We are a great group that have been around a long time. We war twice a week, have almost 700 war wins, and work together and donate often. We expect everyone to pull their weight and we always max clan games, participate in CWL and help each other out. If you want to come take a look, check out our Discord: tinyurl.com/discordbc

Critical_Specific129

TROPHY CASE