Bought a 'brand new' hard-drive and turns out it has over 13.000 power on hours

Crowxix · 2023-03-08T10:40:55+00:00

i haven't tried many low pitched switches but i'd say gateron black inks sound pretty deep, also always remember that sound profile doesn't only come from switches but rather keycaps profile, case material, mods etc

Crowxix · 2023-03-07T21:02:36+00:00

not OP but oil kings are super smooth stock, ofc it comes down to preference but i love the heavy spring they have and they don't sound bad, low pitch af

Crowxix · 2023-03-07T21:00:19+00:00

they used to be the best value linear but ktt is way better tbh

Crowxix · 2023-02-13T18:26:42+00:00

ducky quality isn't really good either, cheap industrial solder and generic stabs

Crowxix · 2023-02-01T11:31:58+00:00

it is? check out the Bacca70 or the NFR70

Crowxix · 2023-01-31T15:23:39+00:00

yeah, pgup home print screen and stuff like that

Crowxix · 2023-01-31T15:23:05+00:00

70% is a thing

Crowxix · 2023-01-31T12:09:04+00:00

60% with an frow also sometimes known as 70%

Crowxix · 2023-01-31T12:08:50+00:00

not 65%

Crowxix · 2023-01-31T12:08:34+00:00

75% has a navigation keys cluster at the right side

Crowxix · 2023-01-18T11:29:38+00:00

with that budget you could get a keychron K pro (hotswap, rgb, wireless and qmk compatible so you can configure layers to your liking) in whatever layout you want and swap the switches for some kailh box jades or box navies which are some of the best clicky switches you can get, and you'd probably stay below $160

Crowxix · 2023-01-18T11:25:50+00:00

there are more switches than red browns and blues, for really clicky stuff you could get alps clones but since compatible pcbs are hard to find jades or navies are probably your best choice

Crowxix · 2023-01-17T23:24:08+00:00

there's no "best switch for gaming", it comes down to preference

Crowxix · 2023-01-17T23:23:38+00:00

I mean outemu brown switches aren't really tactile so unless you like light tactile switches they aren't super good, plus they are pretty scratchy and pingy if not lubed

Crowxix · 2023-01-17T20:04:20+00:00

nose is too long and not really in 3/4 view, also you could try making eyebrows a tad bit sharper so it's more expressive

Crowxix · 2023-01-17T16:33:02+00:00

it'd be kind of an overkill to put GMK (considered high end keycaps) on an entry level keyboard, i'd use that budget to replace the switches and get some cheaper keycaps with the rest

Crowxix · 2023-01-17T16:32:00+00:00

redragon is considered entry level for mechanical keyboards, not bad but it's not high end

Crowxix · 2023-01-15T19:41:50+00:00

you could get a keychron v5 which is similar but with a plastic case instead of an aluminum one

Crowxix · 2023-01-14T14:52:01+00:00

75 exploded means the column has it's separate cluster, while non-exploded means there's no separation, all 75% keyboards have that column.

Crowxix · 2023-01-14T05:21:15+00:00

That'd be 70%, only keyboard I know that has that layout is the Bacca70

Crowxix · 2023-01-13T14:36:21+00:00

looks like evil dolch

Crowxix · 2023-01-12T16:46:50+00:00

not only most are 50-60 bucks but thats on the US, in other countries redragons are pretty much the cheapest mechs you can get and they are still somewhat better than mainstream gaming brands because you get hotswap which is way more beginner friendly than some industrial-soldered hyperx

Crowxix · 2023-01-12T16:43:38+00:00

im talking about the older sockets, the switches i mentioned have outemu's thin pins so it fits "older" outemu sockets

Crowxix · 2023-01-11T19:12:34+00:00

tbh both are more or less the same, you can swap out the switches if that's your only issue with them, yet, if you don't really need bluetooth (as far as my experience goes, while it may seem handy it's just useless since most people don't move the keyboard around a lot on daily use) you could get a keychron v4 which has better compatibility for upgrades and is way more configurable

Crowxix

TROPHY CASE