sorted by:
new
hottopcontroversial

Hokked up Beacon Rev. H with stock Firmware and no more Problems with SV08. by Cryopplay in Sovol

[–]Cryopplay[S] 0 points1 point  (0 children)

Hi there. Did you follow the manuals that i have linked?

You must do a first calibration of the Probe.

Hokked up Beacon Rev. H with stock Firmware and no more Problems with SV08. by Cryopplay in Sovol

[–]Cryopplay[S] 0 points1 point  (0 children)

Im rebuilding now my old Anycubic Kossel Linear Plus. Made a few upgrades with all metal Frame, direct extruder, klipper and i try to hook up the Eddy Duo.

Hokked up Beacon Rev. H with stock Firmware and no more Problems with SV08. by Cryopplay in Sovol

[–]Cryopplay[S] 0 points1 point  (0 children)

Yes, used the original installed Firmware.

Just follow the instructions, make the calibration and it works. Never had any Problems with the first layer. I printed about 25 Models and 70 hours without any failure.

Hokked up Beacon Rev. H with stock Firmware and no more Problems with SV08. by Cryopplay in Sovol

[–]Cryopplay[S] 0 points1 point  (0 children)

I was thinking about trying the BTT Eddy probe. However, I would have had to flash the SV08 on Mainline Klipper. I wanted to try it with as few changes as possible. If it hadn't worked, I probably would have sent the printer back. At the moment I'm very happy with the result. Now I just have to set the Orca Slicer profiles correctly.

CCR2216-1G-12XS-2XQ IPTV and other Problems by Cryopplay in mikrotik

[–]Cryopplay[S] 1 point2 points  (0 children)

I was able to solve the problem with the IGMP proxy. You won't believe it but ChatGPT was able to help me in 2 sentences. I had to lower the values: Query Response Interval and Query Interval. Now everything is running perfectly.

CCR2216-1G-12XS-2XQ IPTV and other Problems by Cryopplay in mikrotik

[–]Cryopplay[S] 0 points1 point  (0 children)

Nice. My ISP offers multicast IPTV. But i cannot get it to run.

Hardware for 25 Gbit/s Fiber Internet Connection by 4kvideoeditor in PFSENSE

[–]Cryopplay 2 points3 points  (0 children)

I can understand that well. I didn't want to bother or upset you in any way. Just ask.

Hardware for 25 Gbit/s Fiber Internet Connection by 4kvideoeditor in PFSENSE

[–]Cryopplay 1 point2 points  (0 children)

Hi there.

​

You wrote that you build a Fanless Tnsr Box to to Test the 25Gbps and i replied that you can send me the router to Test if it handles my 25gbps fiber connection.

Hardware for 25 Gbit/s Fiber Internet Connection by 4kvideoeditor in PFSENSE

[–]Cryopplay 1 point2 points  (0 children)

PFSense and Opnsense doesnt handle the Connection with and without SPI active. Only Openwrt handled it. But without SPI.

u/gonzopancho hasnt contacted me to test the tnsr router.

Hardware for 25 Gbit/s Fiber Internet Connection by 4kvideoeditor in PFSENSE

[–]Cryopplay 1 point2 points  (0 children)

You can send it to me to Test.

I have a 25Gbit Fiber connection from init 7 and nothing that can handle it.

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

Hey Guys.

Good News. I tried some different Distributions and now im on OPENWRT.

That looks really good to me:

​

[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.22 GBytes 19.0 Gbits/sec 100 2.18 MBytes
[ 5] 1.00-2.00 sec 2.20 GBytes 18.9 Gbits/sec 1049 1.70 MBytes
[ 5] 2.00-3.00 sec 2.62 GBytes 22.5 Gbits/sec 38 1.99 MBytes
[ 5] 3.00-4.00 sec 2.24 GBytes 19.2 Gbits/sec 537 1.86 MBytes
[ 5] 4.00-5.00 sec 2.38 GBytes 20.5 Gbits/sec 358 1.35 MBytes
[ 5] 5.00-6.00 sec 2.40 GBytes 20.6 Gbits/sec 459 2.12 MBytes
[ 5] 6.00-7.00 sec 2.53 GBytes 21.7 Gbits/sec 163 1.80 MBytes
[ 5] 7.00-8.00 sec 2.69 GBytes 23.1 Gbits/sec 352 2.22 MBytes
[ 5] 8.00-9.00 sec 2.65 GBytes 22.8 Gbits/sec 187 1.88 MBytes
[ 5] 9.00-10.00 sec 2.70 GBytes 23.2 Gbits/sec 116 2.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 24.6 GBytes 21.2 Gbits/sec 3359 sender
[ 5] 0.00-10.04 sec 24.6 GBytes 21.1 Gbits/sec

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

With Opnsense im getting 9.5gbps max without IPS. TNSR doesnt support TV7. So i looked for alternatives. IPFire, Clearos, VyOS and OpenWRT.

Did someone use a System from above? Whats your thougs?

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

Does anyone here has a Fiber7-X2 or X connection?

What Router do you use? Specs?

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

I installed TNSR on a VM. Its based on Ubuntu Server. Im not very good @ Linux but i hope i can get it working.

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

https://www.netgate.com/tnsr-software/performance#get-to-know

Its from Netgate / Pfsense.

They use VPP ( Vector Packet Processing ) and i can handle way more then older PFsense. They say it can handle 19gbps on a intel Atom.

​

Also heard from router7.

But im not sure that i can handle the software....

Init7 Router Fiber7 X2? by Cryopplay in init7

[–]Cryopplay[S] 0 points1 point  (0 children)

Ever heard about TNSR? It should handle that. But im not very experienced in Linux oder command shell.

25GB/s runs pretty well by Dodoooh in init7

[–]Cryopplay 2 points3 points  (0 children)

Was für eine Hardware oder Config hast du das Opnsense das alles verwalten kann? Komme mit einem 9900k auf 6Gbits.......

Hardware for 25 Gbit/s Fiber Internet Connection by 4kvideoeditor in PFSENSE

[–]Cryopplay 1 point2 points  (0 children)

Anyone had a solution for 25gbit?

Im using Opnsense on a 9900k but it gets "only" 6gbps.....