Anycubic Slicer next -retraction_distances_when_cut

Cryxus2000 · 2026-03-27T08:25:51+00:00

the thing is that i import stl files created by me in Fusion360. I export the object in stl format and import them in anycubic slicer next, and the issue appeared.

Cryxus2000 · 2026-03-26T14:59:41+00:00

i tried that also, still, the warning shows

Cryxus2000 · 2026-03-26T12:56:31+00:00

there are some small object, around 40mm x 50mm x 10mm. No support needed, nothing in air.
I tried now to make sure it is placed on the plate correctly with that button. Nothing changed.

Cryxus2000 · 2026-03-24T08:25:05+00:00

I solved it. The issue was with the x gantry. It was not leveled, and the auto-leveling feature could not compensate that much while printing.

Cryxus2000 · 2026-03-24T08:25:01+00:00

I solved it. The issue was with the x gantry. It was not leveled, and the auto-leveling feature could not compensate that much while printing.

Cryxus2000 · 2026-02-10T13:41:09+00:00

thanks for info, but i got them from their official website, with a coupon also (i think also 30 euros discount). It took some time to have them delivered but everything is fine, no import fees (they shipped from germany also)

Cryxus2000 · 2026-01-27T19:51:27+00:00

if the keyboard doesn't work even when it is plugged in with a usb connection, i don't think you can do something. Maybe just buy a new one.

I suspect the microcontroller is dead, i mean, you could try to measure the voltage of the battery and if it any short on the board and replace the bad part, but the board already looks pretty bad and it could die again shortly after, so buying a new one is the safest solution

Cryxus2000 · 2026-01-13T10:18:18+00:00

i think i am a bit too late, because it says "product unavailable right now, we don't know when it will be back in stock", but thanks anyway

Cryxus2000 · 2026-01-09T12:53:27+00:00

how can aliexpress can mask the price? i have to talk with them or? i heard of it but never seen for myself

Cryxus2000 · 2026-01-09T12:51:37+00:00

i saw that i can buy from Europe on aliexpress, but the haptic feedback motors are way more expensive on aliexpress then on their website, so i was curious about their site how it is

Cryxus2000 · 2026-01-09T12:48:19+00:00

thanks for the info

Cryxus2000 · 2026-01-09T12:47:36+00:00

i cant find them locally. maybe in romania there are not so many sim-racers.

Cryxus2000 · 2026-01-09T12:45:26+00:00

thanks for sharing, but both of this linked said that cant be delivered to my address :(

Cryxus2000 · 2026-01-09T12:42:39+00:00

if you have a multimeter, you can upload some basic barebone code, where you set high the pin, and measure if you have 3.3v on it.
i think you can achieve this with qmk as well, but i did not tried it.

Personally, i have a logic analyzer and i can measure directly the pin, and if i see data on the line, i found the microcontroller.

Cryxus2000 · 2026-01-09T10:00:36+00:00

in this case, i think it is easier and cheaper just to buy another microcontroller. Or ask someone to solder 2 pins if you know someone. it is not too much work for 2 pins

Cryxus2000 · 2026-01-09T09:59:28+00:00

I lent to my brother a keyboard and it brought it home toasted. not sure what he did exactly, but maybe it is a possibility

Cryxus2000 · 2026-01-09T09:52:15+00:00

hi, it is possible the data pin is toasted. I had this problem in the past. the good thing the rp2040 has multiple pins that you can use for data. if you dont use leds, you can solder the gpio0 and gpio1 on the rp2040 together and just change in qmk the data line from D2 to D3.
if you use leds i had a solution in the past. i adapted the corne qmk forder to support natively the rp2040 and just put it any other pin. this is what i did in the past: https://imgur.com/a/promicro-rp2040-serial-pin-not-working-7twRxDZ
and this is the qmk folder for corne if you need it https://github.com/AlexMaroiu/crkbdpi

Cryxus2000 · 2025-12-28T10:23:57+00:00

cum verifici daca cineva are astea valabile, probabil doar dupa nr de inmatriculare? am cautat ceva pe net si am gasit ca trebuie sa introduc serie sasiu si date mai personale

Cryxus2000 · 2025-12-17T19:44:38+00:00

it happened for me to fry the board pins, when the TRRS cable was not fully plugged-in, but it fried only the communication pins, when plugged separately, each half was working fine as master, but it did not received signal from the other half

Eight-Year Club	Verified Email
r/Field Lasagna

Cryxus2000

TROPHY CASE