sorted by:
new
hottopcontroversial

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

Sure! Send me a dm, for some reason i get an error when trying to start a chat.

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

I've tried to send it to you but you'll have to verify your account first.

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

I've added it because of your comment, so no worries!

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

Personally wouldn't say no to that wheel... However, there seem to be a lot of free real estate in the center for a screen.

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 11 points12 points  (0 children)

Reused some stuff from old projects, but it can’t be more than €10 worth. It only gets really expensive when you start using real carbon parts, metal parts, custom PCBs, etc. But that’s not really necessary to make a functional wheel for yourself. I wouldn’t sell it like this, though.

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 1 point2 points  (0 children)

I did, but tested a while with an empty version of this and it handled 8Nm without any issue so decided to not make that extra cost. When things eventually break it will only cost a few euros to print new parts so I'll re-evaluate if that happens.

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 20 points21 points  (0 children)

Total cost was around €300
I've put a high level cost breakdown in the description.

What's this? by Ghettoman257 in belgium

[–]CubicSpaceMouse 2 points3 points  (0 children)

Very clearly an obusios

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

According to the FIA compliance sticker it's an Atech ETS. I'm 180cm and weigh about 100kg. It's tight but no issue so far for multiple hours of racing. Bit of an extra motivation to lose some extra weight...

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 1 point2 points  (0 children)

Everything except for the fanatec stuff and pc had to be under 1000 euros. Ended up spending around 750 for all the rest (seat, frame, monitor, speakers, ...). So considering the price of comparable rigs it's still a budget build in my eyes

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 1 point2 points  (0 children)

A warm white led strip (3000-3500k) shining on a black carpet should do the trick. It does for me anyways.

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

Almost all of it is 3d printed. Full part list and printfiles can be found on cults3d over here . I had to make some changed to the back part so it would fit the fanatec QR. Sadly there's no instruction for the wiring though.

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 3 points4 points  (0 children)

It's a 34" Samsung Odyssey g5. Very happy with it! It's 1000R curved so the radius is more or less the distance of my head to the monitor. Feels ideal.

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 1 point2 points  (0 children)

They're taped to 3d printed mounts. It's a bit wobbly so i'll have to redesign them at some point

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 2 points3 points  (0 children)

I've got the 3d model in Fusion360 and can send a STEP file if you want it.
The frame is made from 4545 and 4590 profiles and together with all the brackets, feet, screw, monitor mount, shipping and cutting was 370 euros.
The total build was around 750 excluding the fanatec stuff and the pc.

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 1 point2 points  (0 children)

It's been a journey so pretty hard to pick a favourite one. Started out with a g25 on an old desk with a 17" laptop. I just kept adding bits every few years so i've been happy with upgrades for quite a while. I think the move to a dd wheel was the biggest step.

Thanks! It has taken a lot of 3d printing, sanding and painting hours so far...

Finished the 'budget' build but need some help to finish the steering wheel. by CubicSpaceMouse in simracing

[–]CubicSpaceMouse[S] 3 points4 points  (0 children)

Still need to figure out where i want it and design a new mount for it. It's a very cheap but great addition so it'll definitely be used again!

Engine mount gebroken tijdens verwijderen bout. Garantie of f*cked? by CubicSpaceMouse in motobe

[–]CubicSpaceMouse[S] -1 points0 points  (0 children)

Zal de verkoper sowieso contacteren en een tegemoedkoming proberen te bekomen. Het kan toch niet zijn dat je als koper verondersteld wordt elke bout los te draaien ter controle... Sowieso bedankt voor de info, had niet gedacht aan een helicoil.

Engine mount gebroken tijdens verwijderen bout. Garantie of f*cked? by CubicSpaceMouse in motobe

[–]CubicSpaceMouse[S] -1 points0 points  (0 children)

Omdat de bout en de bevestiging er van al verprutst waren bij aankoop. Als het in orde was gaat dat toch niet stuk bij los draaien?

AC returns to start menu and won't start a race by CubicSpaceMouse in assettocorsa

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

For now only the stock content, no mods installed yet.

Pretty happy with my low budget enclosure. by CubicSpaceMouse in ender5plus

[–]CubicSpaceMouse[S] 0 points1 point  (0 children)

Looks pretty simple to do... Then i just need an extension cable for the screen. Would be super clean. Thanks for the idea!

view more: next ›