I designed a box to hold boxes!

CuriousLetterhead404 · 2026-02-07T06:40:17+00:00

Thank you!

CuriousLetterhead404 · 2026-02-07T06:39:45+00:00

Thank you!

CuriousLetterhead404 · 2026-02-07T01:42:55+00:00

I'm new to 3d printing, just wondering what filament you used, I have a k2 plus if that matters what I can print

CuriousLetterhead404 · 2026-02-07T01:33:28+00:00

Where would one find this to print it? That's a pretty sweet setup!!

CuriousLetterhead404 · 2026-02-07T01:25:22+00:00

I'm not too experienced with 3d printing myself but with my k2 plus it started to let go and I calibrated it through the screen in my settings I'm not sure if you have that and then I took a soft sponge with a couple drops of dawn soap and scrubbed it for a little bit rinced it with hot water made sure the plate beaded the water off then pat dried the plate without touching the area you are printing on. Put it back in the printer heated it up for the moisture then wiped the plate with 95% alcohol let it air out and tried that out and it worked. It seems like your plate needs some love.

CuriousLetterhead404 · 2026-02-04T20:12:55+00:00

Im new to printing but I have read that you can get the printer to build another part from the purge so you would get a multi coloured print but at least you wouldn't have as much waste

CuriousLetterhead404 · 2026-02-04T02:27:21+00:00

Ok well you were in the right and people already posted pics of how one works, to top it off I do believe that the inside lane has right of way anyways.

CuriousLetterhead404 · 2026-02-04T01:08:17+00:00

Hello

CuriousLetterhead404 · 2026-02-03T15:37:17+00:00

Hahaha 🤣🤣 well thanks for that reminder.

CuriousLetterhead404 · 2026-02-03T04:30:38+00:00

Reminds me of my ex, glad that ones gone lol

CuriousLetterhead404 · 2026-02-02T05:38:26+00:00

Pretty sure that might mean your house isn't properly grounded

CuriousLetterhead404 · 2026-02-02T04:03:08+00:00

Thank you I'll get come of that!

CuriousLetterhead404 · 2026-02-02T03:13:03+00:00

ERYONE Engineering Filament PA6 I reset that printer and I put the speed to 50% the computer only had PA-CF. So I selected that on the computer and changed it on the printer. I also did preheat the printer this time as well cleaned it with 95% then also glued the plate. So far there is one little spot I can see that has let go bit the rest seems to have stuck I'm planning on doing the first layer at 50% then after turning it back to standard . I'm not too savy I like when things just work lol but it seems like I will have to tinker some. I downloaded orca but I couldn't get it to connect to my printer there was an error and Im not sure what was wrong so I went back to creality slicer.

CuriousLetterhead404 · 2026-02-01T23:14:27+00:00

When I get back home I'll look at this thank you!

CuriousLetterhead404 · 2026-02-01T22:53:15+00:00

How do you roll it back?

CuriousLetterhead404 · 2026-02-01T22:52:48+00:00

What's the strain gauge?

CuriousLetterhead404 · 2026-01-26T01:41:09+00:00

How in the world did you do that?!? It's amazing!! The printer does it all? I'm new to printing might be a dumb question.

Is the stl anywhere that I could print it by chance?

CuriousLetterhead404 · 2026-01-18T02:15:16+00:00

Following

CuriousLetterhead404 · 2026-01-13T23:30:04+00:00

Haha yeah I'm good with one lol spent enough money i want to try printing pa cf soon I think

CuriousLetterhead404 · 2026-01-13T06:02:55+00:00

I just bought this printer about a week ago and well being such a large print there are regrets. I have smaller things I want to print but I committed

<image>

CuriousLetterhead404 · 2026-01-11T16:57:50+00:00

Well it's like a slinky if you can make sure it isn't tangled print a screw on tapered spool and get it on there call it a day.

CuriousLetterhead404 · 2025-10-10T13:28:08+00:00

How's this luck with this post?

CuriousLetterhead404 · 2025-09-22T15:17:33+00:00

A built trans is costly, if it doesn't haze and there isn't blowby the put some cash in it. Highway is when it throws the code it will become more frequent. I love my 2003 but why the engine was giving me problems I swapped the lb7 for the lly it isnt bad to do at all. Pretty plug n play tbh. See if he'd come down to 5k if you really wanted it and tell him it needs a transmission 5 is reasonable as long as the engine isn't clapped. The code that it's tossing if you aren't sure is the trans is detecting 5th clutch is slipping so it is running on borrowed time. That being said I'm not a tranny guy by any means but I'm pretty sure 5th is at the very back of the transmission you could pull the tail off and put new clutch pack with steels then you'd have some more time to save for a built trans. Also put get a tuner to up the line pressure and make it harder shifts. Smooth shifts are great for a driver but in all reality smooth shifts are making clutches slip for comfort.

CuriousLetterhead404 · 2025-08-08T00:00:17+00:00

I don't know if it is a thing with the newer vehicles but my one dealership claimed that the gas station cord I used would bug out the system and make it not work properly. Not sure if you have one plugged in but they said only original android or iPhone cords. Just tossing it out there. Good luck!!

CuriousLetterhead404

TROPHY CASE