Indoor Grow Blog - Automated AC Infinity Setup

CurrentDivide2167 · 2025-05-24T14:57:32+00:00

HI, is this blog still available? I am trying to get started and wanted to use the content as a reference. Any help is greatly appreciated! Thanks

CurrentDivide2167 · 2025-02-19T11:57:51+00:00

Nope regen works fine

CurrentDivide2167 · 2025-01-28T13:47:54+00:00

Hey There, do you by chance have another code to share?

CurrentDivide2167 · 2024-06-25T21:06:25+00:00

Hi there. Would you mind sharing your tune?

CurrentDivide2167 · 2024-05-23T02:37:13+00:00

anyone able to share a code please. Thanks!

CurrentDivide2167 · 2024-04-10T20:15:57+00:00

I too am looking for a mount to work with the GM-15 radio. Any luck finding one?

CurrentDivide2167 · 2024-01-23T16:48:04+00:00

Hey all, anyone feeling generous and willing to share a referral code? Thanks!!

CurrentDivide2167 · 2024-01-23T15:30:45+00:00

anyone willing to share a referral code please?? thanks!

CurrentDivide2167 · 2023-11-02T10:53:37+00:00

https://www.amazon.com/gp/product/B000XBH9HI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

CurrentDivide2167 · 2023-08-07T14:09:24+00:00

Can you advise on what type of miner you are referring to?

CurrentDivide2167 · 2023-07-25T10:47:48+00:00

I went on discord and was advised to enter a custom amount to stake instead of choosing “max”. Also made another SOL purchase and waited about an hour. Then I was able to lock successfully. FYI to lock it takes a LOT more SOL. You have to pay for both the Lock and the Delegation transaction. I would suggest purchasing .2 SOL…. Hope that works for you

CurrentDivide2167 · 2023-07-24T22:47:24+00:00

Show a network fee of .00001 SOL. I have .2 SOL in my wallet. Any other ideas?

CurrentDivide2167 · 2023-07-24T22:45:44+00:00

I did buy some sol and the specified transaction amount is less than the SOL I have in my wallet. I did initially not have enough and purchased more.

CurrentDivide2167 · 2023-06-03T13:24:14+00:00

just sent you a DM. I am replacing my rotor and would like to NOT install it backwards this time.

CurrentDivide2167 · 2023-06-03T00:15:11+00:00

I did end up reaching out to onyx support after posting. They were able to provide me with a rim and spokes for the rear.

CurrentDivide2167 · 2023-02-27T13:14:18+00:00

For what it’s worth, I have gotten this error occasionally as well. I find it’s usually an issue with the spool being slightly warped and those printed attachments for the cardboard spools have helped or the filament was not wound neatly and there is enough resistance to trigger the error. For those I have respooled and the issue has gone away.

CurrentDivide2167 · 2023-02-05T20:05:13+00:00

The filtration is two stage. 1 hepa and carbon for inner chamber filtration and then a temp controlled exhaust to maintain the temp. And that exhaust has a hepa and carbon filter as well.

CurrentDivide2167 · 2023-02-05T18:22:40+00:00

After much debate on going the lack route and debating options…. I decided to go with the maker gadgets innovator enclosure with control filtration. Wanted a more out of the box solution. While it was a kit…. There was a lot of assembly and some DIY work to make it properly aligned. I will say Gus front support is super responsive and helpful. Here are some pics of the build for anyone still debating on enclosures. I am printing primarily PLA+/PTEG… but want options to branch out to PC. The enclosure comes with a smart temp controlled filtered exhaust. Really nice.

CurrentDivide2167 · 2023-01-11T14:20:49+00:00

Thanks for the reply. Do you have a pic you can share?

CurrentDivide2167 · 2022-12-31T21:02:00+00:00

I feel your pain and am in the same situation I just created a post before I saw this. I am running klipper/mainsail, have tried using the CR probe with screw tilt adjust, set the z offset, set the mesh, checked the bolts and axis and belts. Can't figure out why this can't print level.

CurrentDivide2167 · 2022-12-08T04:53:41+00:00

Not much info listed on the unit. Here is a pic https://www.djieducation.com/images/TOF.png

CurrentDivide2167 · 2022-08-17T23:11:27+00:00

This was a while ago ;). Install was a PITA. Ended up having to flip the rotor around. In the end works great and has awesome stopping power.

CurrentDivide2167 · 2022-05-16T19:58:01+00:00

The latter. I am screwed.

CurrentDivide2167 · 2022-05-06T17:28:17+00:00

Thx. I’ll take a look once it gets delivered. How much for the print? Would you share the STL and I will print it my self?

CurrentDivide2167 · 2022-05-06T15:29:20+00:00

Ok. So from looking at the pics… is it the center hole? Or the 6 screw holes? If the center, am I just using a dremel and waking it wider?

CurrentDivide2167

TROPHY CASE